QA

Question: 7 Foot Rectangular Table Seats How Many

How many chairs fit a 7ft table?

A table of 84 inches (7ft; 214cm) could fit 12, although a more comfortable fit would be up to 96 inches in diameter (8ft; 244cm), which can sit anywhere from 8–12 people comfortably. You might find the distance of an 8-foot table, however, interferes with conversation.

How many people can you seat at a 72 rectangular table?

If you have a 6 foot round table (72 inches), you can seat 8-10 people at the table. If it is a 30 inch by 72 inch rectangular table, 6-8 seats will fit around the table, with 3 chairs on either side and 1 chair at either end.

How many does a 72 inch table seat?

Stretching the length to 72″ will allow you to comfortably seat 8 people, and increasing the size to 72″ x 48″ will allow you to comfortably seat 10.

How big is a rectangular table that seats 10?

Tables are typically 36 inches wide, says Home Stratosphere. If the chosen table is less than this, the end may not be wide enough for a setting, in which case the required length must adjusted. To seat 10 people, with four on each side of the rectangle, the table must be 96 inches long.

How big is a rectangle table that seats 6?

For Rectangular Tables: Most people find that a 6 foot long (72 inch) dining table is perfect for seating 6 comfortably.

Can you fit 6 chairs around a 48 table?

A 48″ round table can seat 4-6 people comfortably.

What will be the size of a rectangular table that is good for 8/10 persons?

Choosing the Right Dining Table Size Size (Diameter): Oval & Rectangular Will Comfortably Seat: Round & Square Will Comfortably Seat: 5 feet (60 inches) 6 people 6 people 6 feet (72 inches) 6 people 6 people 8 feet (96 inches) 8 people Not a typical size 10 feet (120 inches) 10 people Not a typical size.

How many can you seat at a 5 foot rectangular table?

If rectangular, and the table length is 5 feet: sits 4-6 comfortably; if it’s 5 feet round, up to 8 people comfortably; If rectangular, and the table length is 6 feet: sits 6-8 comfortably; if it’s 6 feet round: up to 10 people comfortably (if you use banquet chairs, you can squeeze 12 people);.

How long is a table that seats 8?

A table that seats four should be about 48″ long. To seat four to six people, look for a table that is at least 60″ long. For six to eight guests, your table should be at least 78″ long. The rule of thumb is to allow 24″ of space per seat at your dining table.

How many does a 90 inch table seat?

Tables that measure 90 inches and above are best for comfortably seating 8 or more people. Many of our large dining tables even come with extension leaves, which will expand the designs to greater lengths and fit more guests.

How many can you seat at a 4 foot rectangular table?

A 4 ft. banquet table can comfortably seat 4 guests, and a 6 ft. banquet table can comfortably sit 6.

How many does a 60 inch table seat?

The 60 inch, or 150 centimeter, round banquet table, seating 8 or 10 people, is possibly the worst invention in the history of the hospitality industry.

How big of a table can I fit in a 10×10 room?

There is adequate space for seating and a walkway behind the diners with a clearance of 36 to 42 inches from table edge to a wall or other furniture. A table 36 to 42 inches wide and 60 to 72 inches long can be accommodated in a dining room.

How big is a rectangle table that seats 12?

A 96” – 108” long rectangular table can seat up to 12 adults, depending on table width. A 120” long rectangular table can seat up to 14 adults, depending on table width.

What is the standard size of 6 seater dining table?

For a 6 seater dining table size the approximate 6 seater dining table size in inches would be 36 inches in width and 60 inches in length. Roughly, in terms of 6 seater dining table size in feet, this translates to 3 ft in width and 5 ft in length.

How long is a table that seats 12?

You need about 1 1/2 to 2 feet to seat a diner comfortably, so a table about 9-10 feet long would work for 12. Pedestal tables can accommodate guests better since there’s no leg to get in the way.

How many chairs can you fit around a 54 table?

54″ Round Dining Table. For a formal meal, a 54″ round table will seat 5 people comfortably. For a casual meal, you can sit 6 people around the table.

How many chairs fit around a 120cm round table?

120-centimetre diameter with legs seats four. 150-centimetre diameter with a pedestal base seats six. 150-centimetre diameter with legs seats four. 180-centimetre diameter with pedestal base or legs seats eight.

How much space do I need for a 48 inch round table?

As a general rule, you need about 36 inches (3′) of space for a chair. It won’t take up that much space when drawn up to the table, but you need to be able to push the chair back to get up. Hence a 48-inch diameter round table actually needs a space of 10 square feet.

How long is a 10 seater table?

A standard, rectangular 10-person table measures 96-inches long.

How long should table runners be?

The length of your table runner is up to you. Ideally, it should hang at least six inches over each end of your table, but shouldn’t hang further than your tablecloth. For example, if your table is 60 inches long, your table runner should be at least 72 inches long, allowing for six inches at either end of the table.