Table of Contents
Blueboard is a type of drywall that is frequently used for a tile wall in a shower. Not only is it water-resistant, but blueboard is easy to find and inexpensive, making it an ideal option for those on a budget. Furthermore, blueboard is not difficult to install.
What goes behind shower walls?
Rigid air barrier materials for use behind showers and tubs include fiber-cement, fiber-reinforced gypsum, glass mat gypsum, or fiber mat-reinforced cementitious backer panels.
Do you put drywall behind a shower surround?
Fiberglass and acrylic tub and shower enclosures come with a flanged edge that attaches directly to the wall studs, and the proper way to hide this flange is to install drywall over it. Consequently, enclosures are typically installed on the bare studs.
Can Greenboard be used in a shower?
Cement board is perfect for tile-covered wet applications like showers and tub surrounds. One reason why builders may use greenboard for highly wet areas, though, is because it is faster and easier to install and less expensive on a square-foot basis.
What is the best material to use behind shower walls?
Acrylic is the best system to use for shower walls because it is the safest, least high maintenance, and easy to install, meaning your shower could be done in as little as one day. Acrylic is one of the most durable materials used in the shower construction industry, and for good reason.
Should you put plastic behind shower walls?
They are required beneath your shower pan and behind your shower walls. Moisture barriers can be made of polyethylene or a membrane that is rolled directly onto the drywall. No matter what they are made of, without them, your shower is subject to moisture damage.
What goes behind cement board in shower?
Use an appropriate waterproof or moisture-resistant backing material behind grouted tile or stone or segmented plastic or fiberglass tub and shower surrounds. Appropriate materials include cement board which has a cementitious core and glass mats on both sides to strengthen the board.
What is the best backer board for a shower?
Cement board is a good, reliable backer board that works well on both floors and walls. Keep in mind that most tile setters err on the side of caution and brush a waterproofing membrane on top of cement board when it is in wet areas like showers or tub surrounds.
Can I use drywall in shower?
Drywall is not an adequate backing material for a tile shower. Even moisture-resistant drywall (often green or blue in color) is not durable enough to withstand water exposure. Over time, the drywall will deteriorate from moisture, causing your tile to sag, crack, or fall out.
Can I Waterproof Greenboard?
IS GREEN BOARD WATERPROOF? Green board is water-resistant – it is not waterproof. Green board is highly efficient in bathrooms and kitchens, where moisture is frequently in the air, but it is not the drywall that should be set behind tile in your shower or any other areas where it can come in direct contact with water.
Can you use cement board in a shower?
There are several acceptable applications of cement board in the shower. All applications pair up the tile board with some kind of waterproofing material, whether a liquid membrane, plastic sheeting, an uncoupling membrane like Schluter Kerdi, or a board that is already faced with waterproofing.
What type of shower is easiest to clean?
The easiest shower materials to keep clean are smooth surfaces that contain very few hiding places for mildew and mold. That being said, fiberglass and acrylic tend to stand out as the best materials for simple and easy shower cleaning.
Do you put drywall behind cement board?
Because cement board can be used either for floors or walls, the surface below the cement board will vary: In such wet areas, never install cement board directly over drywall or green board. Instead, first, remove the existing surface material, then install the cement board over the studs and membrane, as applicable.
Do I need to waterproof shower walls before tiling?
Contrary to popular belief, ceramic tile and grout, by themselves are not waterproof. Water can penetrate through cement-based grout and work its way through the substrate. To prevent water damage, you must install a waterproof membrane just below the tile bonding mortar as close to the tile as possible.
Which is better durock or Hardibacker?
Durock is too abrasive and can damage vinyl, porcelain, and enamel. HardieBacker does not contain any course materials, so it is the preferable choice. It has a warranty that extends over the use of vinyl tile applications. Durock does not.
Do I need to waterproof cement board in shower?
Whether you’re laying down a new tile floor or installing a shower, you may use a sheathing material such as backerboard. Although most backerboards currently available won’t fall apart when exposed to moisture and are somewhat water-resistant, they aren’t waterproof.
Is there a waterproof paint for shower walls?
The simplest choice for shower walls is to paint them with a waterproof, bathroom safe paint of your choice. Most paints that are fit for use in bathrooms are at least semi-gloss, and the glossier the paint is, the more water resistant and the easier to clean it will be.
Can you use purple board in a shower?
Purple sheetrock is highly resistive to mold, damage, and water. It is used on the exterior of commercial buildings and many other applications such as showers.
How thick should cement board be for shower walls?
The minimum recommended thickness for the shower wall is 1/2″ because like some of the other boards, they become far too flexible at thicknesses below 1/2″. Foam shower tile backer boards are generally about 4x the cost of cement board.
Do I need vapor barrier behind Hardibacker?
Hardibacker doesn’t need a vapor barrier or waterproofing except you do need to tape and thinset the joints.
Can drywall be waterproofed?
Drywall can be primed and painted to be waterproof. Although water resistant drywall — commonly referred to as greenboard or blueboard because of its color — is available at most home improvement stores, you may find yourself needing to waterproof your current drywall.
Can you tile directly on drywall?
As long as your wall is smooth and flat, you can install a ceramic tile kitchen backsplash directly over drywall or plaster with no problem. Start by cleaning the wall to remove any grease, then apply thin-set adhesive, and set the tile. After the adhesive has set, apply grout, and you’re done.
Is moisture-resistant drywall required by code?
Changes made to the 2006 International Residential Code (IRC) no longer recognize moisture-resistant, paper-faced drywall (commonly known as “green board”) as a suitable tile backing material in wet areas such as tub and showersurrounds.