QA

Quick Answer: How To Install Apron Front Sink

What is the difference between a farm sink and an apron sink?

Apron sinks are deep cut, like farmhouse sinks. The only difference is, an apron sink’s front is exposed. That’s why they’re also called “apron front” sinks. Modern kitchens use apron sinks as highlight pieces, and for good reason.

Can you put farmhouse sink in existing cabinets?

Can you put a farmhouse sink in existing cabinets? Yes, you definitely can! Something you should keep in mind, though, is you’ll have to cut out the front of the cabinet and remove the counter top prior to farm sink installation.

Do you glue down a farmhouse sink?

For now, the sink just rests on top of the framing – no need for fasteners or adhesive. The ¼” gaps on both sides of the sink leave room to make final adjustments when the countertops get installed. Use a level to make sure the sink is even in all directions so that water will drain properly.

How far should an apron sink stick out?

Most farmhouse sinks stick out past the face of the cabinets from . 75 of an inch to as many as 2 inches. Take a look at nearby drawers prior to ordering your sink to ensure that you will have clearance when the drawer is extended.

Do you need a special cabinet for an apron sink?

Apron front sinks require a special cabinet to accommodate their depth and protrusion, so they are not the best candidate for retrofitting in an existing kitchen, unless you’re willing to replace your sink cabinet as well.

Are farmhouse sinks out of style 2021?

Single bowls will remain hot, but apron-front, or farmhouse, sinks will not be too far behind. The same goes for kitchen faucets: 42% of designers expect stainless to remain most popular, but black faucets come in second with 32% of designers believing the color will be most popular.

What’s the point of an apron sink?

A farmhouse or apron front sink is a drop-in sink that has an exposed front-facing side. This means that they are designed to be added to a space cut out especially for the kitchen counter in an effort to blend seamlessly with a kitchen counter for aesthetic purposes.

What is the point of an apron sink?

Unlike recessed sinks, the apron sink sports a front that juts out slightly from the supporting cabinetry. Again, this was a practical design that helped prevent cabinet damage. Any water or suds that dripped over the lip would fall to the floor rather than puddle on cabinet countertop wood.

Why is it called apron front sink?

These early homes had dishpans and dry sinks, not connected to a plumbing system, so they needed to fill and drain manually. This is where the farmhouse sink came into play. Also known as apron sinks, or apron front sinks, these large kitchen basins were often present in rural homes of decades past.

Is it hard to install a farmhouse sink?

Fortunately, farmhouse sinks are designed to work in existing kitchen sink cabinets. They do require modifications, but none are very difficult. The first step is to remove the existing sink, then make a sink access-notch in the face frame just above the doors.

Can you flush mount a farmhouse sink?

What are the installation options for a farmhouse sink? Farmhouse sinks are available with several mounting options. Flush mount farmhouse sink: some farmhouse sinks may be flush mounted, but may jut very slightly above counter level, depending on material.

Can you replace a drop in sink with a farmhouse sink?

Yes, a regular sink can be replaced by a farmhouse style. Yes, one can be installed in an existing countertop, even granite.

Do farmhouse sinks add value?

Farmhouse sinks can help add 30% to your home’s asking price.

Can you replace kitchen sink without replacing countertop?

Answered by Todd’s Home Services: The short answer is yes it can be replaced. However, I do recommend having a granite contractor do the replacement. The adhesive used to hold the sinks under the top is very strong once adhered. It will likely have to be cut and ground out from the underside.

How are farmhouse sinks secure?

Set the sink in place and fill in any gaps below the sink front and between the sink and countertop with silicone sealant. Hold the sink in place to secure. Place the countertop onto the sink and remove any excess sealant from all surfaces. Allow the silicone to dry for 24 hours.

Can you top mount a farmhouse sink?

Yes. A farmhouse sink can be installed undermount, top mount or a flush mount.

What is the standard depth of a farmhouse sink?

At 20 to 42 inches side to side and 7 to 10 inches deep, these sinks can easily weigh 100 to 200 pounds.

How much does it cost to install farmhouse sink?

The average cost of installing a farmhouse sink is around $170, but it can be significantly lower or higher, depending on the complexity of the installation and other factors. On the low end, expect to pay $75 to $90 for installation. If the installation is particularly complex, you might pay $380 to $480.

What kind of cabinet do you use for a farmhouse sink?

The Shaker sink base cabinet from Nelson Cabinets, for example, measures 30 to 36″ in width, so a farmhouse sink measuring anywhere from 27″ to 33″ in width would be a good match.

What cabinet do you use for a farmhouse sink?

When installing your farm sink as an undermount option choose a cabinet that is 3 inches wider than your sink. This allows for 1.5 inches on either side.

What is the current trend in kitchen sinks?

The Latest Trends in Kitchen Sinks Homeowners are opting for large, single-basin sinks rather than double sinks to make room for bulky pots and pans. The primary sink is often accompanied by a smaller prep sink.

Is a farmhouse sink worth it?

A farmhouse sink makes it easy to wash larger items like pots, pans, and baking sheets. It’s also a great option if you prefer to soak a lot of dishes at once before you wash them or pop them in the dishwasher. Another perk to a farmhouse sink is that it’s much easier to fill large pots with water.