QA

Quick Answer: Crown Moulding How To

Is installing crown molding difficult?

Compared to wood, foam crown molding is not only affordable and easy to install, but it’s also pliable—making it easy to work with around the curvatures of your home.

Can you install crown molding without nail gun?

Your local big-box hardware store carries molding in all different styles, and they’ll cut it down for you to the exact sizes you need. Installing it is as simple as buying a box of itty-bitty finishing nails and hammering in the molding. Seriously, you do not even need a nail gun.

How thick should crown molding be?

Even in casual spaces, the crown should be a minimum of 4″ while formal spaces will need a crown of at least 9″. In some cases, you will want a full entablature (cornice + picture mold) that is up to 24″ in height.

Can you glue crown molding?

Apply Loctite Power Grab Molding & Paneling Adhesive to the back of the molding, keeping at least 1/2″ from the edge. Place the trimmed end of the crown molding on the wall next to the corner. The adhesive will keep the molding or trim in place while you tack it in place.

Can I use baseboard as crown molding?

Can I Use Baseboard as Crown Molding? You can use baseboard as crown molding and many people choose to do so, so you would not be alone if you do this. While it can look nice in some applications, it’s better to use baseboard for its intended purpose on the floor.

Where do you nail crown molding?

Crown molding is usually nailed to the wall studs along the bottom edge and into the ceiling joists above–a lot of stud-finder work.

What side of crown molding goes up?

Crown moulding is installed in the reverse fashion of base moulding. The deeper grooves go on the bottom, and shallower grooves belong on the top. Generally, crown moulding extends further down the wall than on the ceiling. The concave (cove) side goes down, and the convex (rounded) side goes up.

How much should I pay for crown molding installation?

The average cost to install crown molding is $7 to $16 per linear foot depending on the materials chosen and labor costs. For an average living room, crown molding costs $464 to $1,102, while a kitchen costs between $210 to $570, and an entire home costs between $2,000 and $4,000 for both labor and installation.

Should you put crown molding in every room?

You may choose to add it to every room, only a few of your rooms, or even just one room, depending on your house’s style and layout. It’s perfectly fine to change the design of your crown molding from room to room as long as the designs are complementary and flow nicely together.

What rooms should have crown molding?

Most experts recommend putting crown moulding in the centralized rooms of the house (like the kitchen, living room, family room, and dining room), however, the bedroom is also a great place to utilize it. It’s a great way to increase the sophistication of your bedroom’s design without adding clutter.

Does crown molding have to be nailed into studs?

Crown moldings, or any corner trims really should be nailed to a stud, not simply into unbacked drywall. Without good support, the molding will warp out from the wall causing gaps in coverage to open along the edges.

Should I nail or glue baseboards?

Installing baseboards with a combination of baseboard adhesive and finish nails creates a tight connection between the wood and the wall. The adhesive prevents the wood from bowing out between the wall studs, while the nails keep the boards locked into place while the glue sets.

Should crown moulding be glued?

Use glue to hold the crown molding in place to nail or to provide extra security for using thinner nails. Use material-specific glue when the installation does not allow for nails. Use nails without glue if the install may be a temporary solution to determine if the look is desired.

Should crown molding touch the ceiling?

Crown molding does not always have to be installed against both the wall and the ceiling. For a fun effect, consider installing the crown only against the wall and moving it downward about a few inches.

Why is there a gap between crown molding and ceiling?

Crown molding ceiling gap happens because the rough lumber behind the drywall shrinks. It can be prevented by nailing the ceiling molding to the ceiling allowing it to float up and down on the wall. Another key point is the outside temperature and humidity is much different in South Carolina during the year.

When should you not use crown molding?

There are a couple of situations when you don’t want to use crown molding. If you have cathedral or vaulted ceilings, a typical crown molding will probably not fit or look good. Also, crown moldings need a distinct starting and stopping point, ideally going around a room in both directions and meeting again.

Does crown molding make a room look bigger or smaller?

Crown molding adds an elegant touch to a room. However, depending on how you paint them, they can actually make a room appear smaller. But if you paint the molding the same or a similar color to the wall, even darker rooms will appear more spacious.

How tall should ceilings be for crown molding?

Measure the ceiling height. For standard 8-foot-high ceilings, the crown/cornice height should be 2½ to 6 inches; for 9-foot ceilings, 3 to 7½ inches, and for 10-foot ceilings, 3½ to 8 inches.