QA

How To Replace The Belt On A Dryer

Is it easy to replace a dryer belt?

One of the most common causes for a clothes dryer to fail is a broken drive belt on the dryer drum. This is an easy do it yourself repair, which uses very few tools, and can save a lot of money.

How much does it cost to replace a dryer belt?

Dryer Belt Replacement Replacing a dryer belt costs about $200 if you hire a pro, or $10 to $20 for DIY.

How do I know if my tumble dryer belt is broken?

Dryer Drum Will Not Turn Listen to the noise the dryer makes. If you push the start button on your dryer and hear the motor running but the drum is not turning, this is most likely a broken dryer belt. The dryer will have power, start up and the motor runs, but the clothing drum will not simply not turn.

How do you fix a broken belt on a dryer?

Instructions Shut off the power. Unplug the dryer. Raise the top panel. Pull the lint screen out of the housing in the top panel of the dryer. Remove the front panel. Remove the drive belt. Install the new drive belt. Reinstall the front panel. Reassemble the top panel. Restore power to the dryer.

Are dryer belts Universal?

It’s universal at a reasonable price. All you need to know is the size of your dryer belt. if you search dryer drive belts you will find out that they sell three different size belts.

Can I use a dryer with a broken belt?

When Belt Breaks Over time, wear can weaken the belt until it reaches its breaking point. When a dryer belt breaks, the drum no longer turns to tumble the clothes in the dryer’s hot air. This means clothes won’t dry even if the dryer’s heater and electric motor continue to function.

What causes a dryer belt to break?

A dryer belt wrapped around the drum’s exterior causes it to turn. Over time, the belt will wear out and eventually break, which will prevent the drum from rotating, and the dryer from functioning properly.

What does a broken dryer belt sound like?

Drive Belt: Thumping Noise Another common cause of dryer noise is that the drive belt is worn out or broken. If it is damaged, it cannot properly turn the drum and will likely make a loud thumping noise. The drive belt is relatively easy to remove and replace.

Why is my dryer getting hot but not spinning?

A broken drive belt is the most common reason a dryer won’t spin. A working belt should provide some resistance, so if the drum turns very easily and loosely, the belt is probably broken. Unplug your dryer and remove the lid so you can inspect the belt to confirm that it’s broken.

Where is a dryer belt located?

The dryer belt goes around the outside of the drum and is looped onto a drive pulley attached to the dryer motor shaft which drives the belt, and around an idler pulley which applies tension to the belt. This tension is what causes the belt to grip the outside of the drum in order to rotate it.

Is it worth it to repair dryer?

Is it worth repairing a dryer? Dryer repairs are worth it if the appliance is less than 4 years old and the cost is less than $400. For older dryers and/or costly repairs, replacing your appliance is more cost effective.

What side of the dryer belt goes against drum?

Note: The flat side of the dryer belt should be against drum. Note: The grooves of the dryer belt should be against the drum. Note: Labeled side of the belt should face away from the dryer drum.

What size belt does a Kenmore dryer use?

Dryer drum drive belt. The belt is flat, 92-1/4 inches long, 1/4 inch wide and has 4 ribs and 3 grooves. It replaces many other belts, including some with 5 ribs and 4 grooves.

Are all dryer belts the same?

Typically, a standard size belt will be a few inches longer than double the conveyor dryers length. For example, an 8 foot dryer might have a belt that is 16 feet, 3 inches (195” overall).

Why does my dryer sound like it has shoes in it?

Does it sound like you are drying a pair of sneakers or shoes in your dryer? The rumbling or thumping sound could be caused by worn drum support rollers. Drum rollers can either be on the front of the dryer drum, such as on a cabinet door, or on the back of a dryer, or both, dependent on your dryer’s model.

Why is my dryer being so loud?

Over time, the drum bearing wears out. If the drum bearing is worn out, the dryer may make noise. If the rollers are worn out or start binding, the dryer may make a loud rumbling noise. To determine if the support rollers are worn out, remove the belt from the dryer and try turning the drum by hand.

Is it safe to use a dryer that doesn’t spin?

Most of these machines rely on air passing through the heater, which in turn regulates the amount the heater element burns(and in most cases the turning of the drum/motor/belt has something to do with making this airflow. Without the airflow, it should either cut out, or burn out.

Why does my dryer smell like its burning?

A burning smell coming from your dryer is not a good sign—it’s a fire hazard. Try removing any built up lint from the lint catcher, cleaning the inside of the dryer, and/or cleaning the hose duct and vents. If the smell persists, you may need to check the electrical components inside the dryer and have them replaced.