Table of Contents
How do you attach a wood mantel to a brick fireplace?
How to Install a Mantel Remove the old mantel. Add support by drilling holes for lag shields, then install lag bolts into the brick. Measure carefully and drill corresponding holes for the wood mantel. Push the wooden mantel carefully into place using wood glue for extra support.
Can you put a mantel over brick fireplace?
Since wooden mantels are quite heavy, they need to be securely attached not only to the brick fireplace but to the wall studs behind the brick. You can attach a wooden mantel to a brick fireplace in an afternoon with common hand-operated tools.
What is a floating mantel?
Our mantels are hollow on the inside, providing an easy alternative to solid wood mantels. Live grain end caps maintain the look of a solid piece of wood. Each mantel is hand crafted from reclaimed longleaf pine, providing a unique look and character that cannot be duplicated.
What type of wood is used for mantels?
Walnut is a popular choice for fireplace mantels. It is a harder and heavier type of wood than most and is extremely durable. The rich dark brown wood is an excellent for an impressive fireplace mantel. Hickory is also a great choice for a fireplace mantel if you are going for a unique look.
How can I cover an old brick fireplace?
One way to update your fireplace is by covering it with tile. “Because tile requires a smooth surface, though, and brick is anything but, you will need to use a cement backer board,” advises J.B. Sassano, president of Mr.
How do you cut brick fireplace?
A circular saw fitted with a masonry blade will cut both brick and mortar, producing clean lines, but with a great amount of debris. An angle grinder with a masonry wheel also will cut through both the brick and the mortar and allows for tighter angles. However, debris blow-back is significant.
How thick should a fireplace mantel be?
A depth of 7 inches is ideal for most mantels, as it allows plenty of room to accommodate decorative objects. Keep in mind that the top and the sides of the mantel should be the same depth.
What is the best way to drill into brick?
Begin by drilling a pilot hole using a small masonry bit. Then, attach the larger bit and drill again to make a bigger hole. Make sure the drill is perpendicular to the brick wall. Drilling through brick and mortar places stress on the drill, causing it to heat up.
How much weight can a fireplace mantel hold?
Combustible objects placed on or around the mantel must meet your fireplace manufacturer’s requirements for clearances to combustibles. DO NOT OVERLOAD MANTEL: THE MAXIMUM LOAD FOR ALL 60 INCH MANTELS is 150lbs. MAXIMUM LOAD FOR ALL 72 INCH MANTELs is 180lbs.
How are fireplace mantels attached?
As with many other forms of mantle or shelf, a fireplace mantel can be commonly attached to the wall with screws or lag bolts. Bolts are screwed into the wall above the fireplace before a mantel is slotted straight onto it. A rubber mallet can also be used to help ease the mantel out of position if it’s stuck.
What kind of screws do I need for brick?
Self-tapping brick anchors, concrete block or concrete screws are used for fastening items to brick. Concrete screws are most commonly called Tapcon® masonry screws. The heavy-duty masonry screw has the versatility for use in brick, mortar joints, CMU, block or solid concrete.
How far should a mantle stick out?
A mantel should stick out at least 6 inches (15.24cm) from the wall. It’s the perfect depth that allows you to have a mantle effectively deflect heat without compromising aesthetics. You can extend it to have more depth for your decorative pieces, but we don’t recommend having it less than 6 inches (15.24cm).
Do you install mantel before or after stone?
It’s best to build the mantel right into the stone, rather than refinishing the fireplace first.
How far should mantle be above fireplace?
As a general rule, it’s important to mount the mantle an average of 12 inches over the fireplace opening, which is a general rule from the National Fire Protection Agency (NFPA) to ensure it’s up to code. The mantle can also be 4 1/2 feet above the floor.
Does Pine make a good mantel?
Woods to Avoid for a Fireplace Mantel Not all woods are suitable for fireplace mantel shelves. Softer woods like fir and pine look attractive when they have been sanded down and polished, but are known to crack easily with the passing of time.
Can you use timber for a fireplace mantel?
This reclaimed barn beam would be a true rustic fireplace mantel in your home or business. All mantels are surface washed and kiln dried, and have a variety of finish options and customizations to choose from. These solid wood timbers are cut to your specified length and finished with your preferred shade of finish.
Does cedar make a good mantel?
Cedar is a knotty softwood so it’s soft enough to work with easily but durable enough for a mantel shelf. Northern white cedar and aromatic red cedar is indigenous to North America and not endangered, so the wood is widely available in several forms suitable for mantel shelves.
How do you make a brick fireplace look modern?
There are a ton of options for things that you can do to change the look of a brick fireplace: Whitewash or paint the brick. Stucco over the brick. Add tile to the surround or whole fireplace. Add a new mantle to the existing fireplace.
