Table of Contents
Standard washer and dryer sizes are generally 27 inches wide, 39 inches tall and 32 to 34 inches deep for front load units. Whereas, top load washers and dryers are typically 27 inches wide, 42 to 44 inches tall and less deep with depths of 27 to 28 inches.
How much room do you need for a washer and dryer?
Space requirements. For a stackable washer and dryer, provide a minimum space of 40 inches deep and 32 inches wide. A side-by-side washer and dryer need space measuring at least 40 inches deep and 56 inches wide.
What is the standard size for washer and dryer?
Size: Traditional washers (and dryers) are 27 to 28 inches wide and 30 to 35 inches deep; height can vary. Plan for 6 inches of space between the machine and the wall and 1 inch between machines.
What are standard washing machine dimensions?
FAQs. How big is a washing machine? Washing machines come in standard height (85cm) and width (60cm) measurements, it’s just depth that can change depending on size of the drum. Smaller drum sizes will have a smaller depth, but some large models can be quite slim.
How wide is a washer and dryer side by side?
Washer and Dryer Sizes The average width of a washer and dryer is 27 inches. If you’re planning on putting the two side by side, this requires a 54-inch space at the very minimum. The height of a washer or dryer typically ranges from 38 to 43 inches, while the depth varies between 28 and 34 inches.
What is the smallest size for a washer dryer you can find?
The smallest full size washer and dryer are typically 27 or 28 inches in width. 24-inch wide units are usually classified as compact.
How far should a washer and dryer be from the wall?
It’s ideal to have around six inches of space behind your washer and dryer. A periscope dryer vent can save space behind the dryer.
Are all washers 27 inches wide?
Front-loading washers usually measure 27 inches wide. Space-saving washers include traditional and high-efficiency models. In each category of machine, widths and other measurements vary, but among full-size models, machine widths usually fall into a narrow range of measurements.
What are the dimensions of a front load washer and dryer?
Front-Load Washers and Dryers General Dimensions of Front-Load Washers and Dryers Compact Full-Size Width 24 inches 27 inches Height 34 inches 39 inches Depth (door closed) 24 inches* 32-34 inches* Depth (door open) 42-44 inches* 54-57 inches*.
Is 4.5 cubic feet a big washer?
Generally speaking, 4 cubic feet is enough to wash 12-16 pounds of laundry. A larger capacity unit at 4.5 cubic feet can hold up to 20 pounds of laundry. One to two person household can use a small to medium size washer (1.8 to 3.5 cu ft) while a family should opt for a large washer (3.6 to 5.1 cu ft).
Are all washer dryers the same size?
What is the standard size for a washer dryer? Washer dryers all tend to be roughly the same size for an easy fit in your home. Usually measuring 850mm (height) x 600mm (width) x 600mm (depth). It can vary by a couple of millimetres, it all depends on the manufacturer.
How much space do you need for a side by side washer and dryer?
Washers and dryers placed side by side typically require a horizontal space of 60 inches or five feet. Measure the depth of the appliances (most are around 33 inches) and add six inches for hoses and venting. Allow one inch on each side and between appliances to reduce noise from vibrations.
What are the dimensions of stackable washer and dryer?
Most stacked washer dryers come in the standard 27-inch width size that’s the same as a standalone washer or dryer, but there are also 28-inch options, as well as slimmer 24-inch models. Typically, these units fall between 74-½” tall up to 79” in height, and 26 to 33 inches in depth.
Do they make small washers and dryers?
The size of compact washers and dryers can vary depending on the specific type of model, but many units are about the same size as a dishwasher: typically about 17 to 24 inches wide, 23 inches deep, and 34 inches high (taller for stacked models).
Are there small washer and dryers?
The smallest washing machine and dryer available on the market is 24 inches wide, with a load capacity of 2.2 cubic feet. In comparison, a full size washer (by American and Canadian standards) is 27 inches wide.
Does dryer have to be on exterior wall?
The necessity of ventilation dictates placement of the dryer, because its vent works best when it spans a short distance with few (if any) redirections. For this reason, locating the dryer against an exterior wall is strongly recommended.
How much clearance is needed for a washing machine?
DIMENSIONS. Make sure to measure your available space carefully. Keep in mind that washing machines typically need a 4-5mm clearance to the sides and back, both freestanding and integrated.
How do you measure the depth of a washing machine?
Measure how far the hoses in the back protrude. There will be two inlet hoses, hot and cold water, and a drain hose. Add this to the depth measurement. The hoses must have enough space behind them so that they don’t crimp and impede the water flow into and out of your washing machine.
