Table of Contents
The length and width of drywall sheets are usually in multiples of 4 feet—most commonly, 4-foot by 8-foot, 4-foot by 12-foot, or 4-foot by 16-foot sheets.
Does sheetrock come in 10 foot lengths?
USG Sheetrock Brand 1/2 in. x 4 ft. x 10 ft. UltraLight Drywall 14113411710 – The Home Depot.
Does drywall come in 9 foot lengths?
Are you preparing to install drywall in a building or home with nine foot ceilings? Today most building supply warehouses carry drywall sheets in 54 inch widths. 54 inch widths allow you to stack two sheets and create 108 inches or 9 feet!.
Does drywall come in 16 foot lengths?
For tall or long walls, drywall is available in lengths of 12 or 16 feet. One advantage of these longer sheets is that you can create a smooth vertical surface to meet higher ceilings, creating a smooth surface that is completely unbroken from floor to ceiling.
How much does a 10 ft sheet of drywall weight?
Standard Drywall One-half-inch board weighs 54.4, 68 or 81.6 pounds for sheets of eight, 10 or 12 feet. Boards 5/8 inch thick weigh 73.6, 92 or 110.4 pounds per eight, 10 or 12 feet.
What is 54 drywall used for?
For use on interior walls and ceilings. Also known as gypsum board, or drywall, ProRoc® 54″ Regular is a durable, lightweight, cost-effective building material produced for interior walls and ceilings.
Is it better to hang drywall vertical or horizontal?
On commercial jobs, fire codes often require seams to fall on the entire length of the framing, so the drywall must be hung vertically. For walls 9 feet high or shorter, hanging the drywall horizontally has a number of benefits. Fewer seams. Horizontal hanging reduces the lineal footage of seams by about 25%.
Can you hang drywall on 24 centers on walls?
drywall thickness, lightweight is ideal for ceilings that have joists 24 inches on center. drywall has always been approved for use on 24-in. spacing on ceiling framing, but because of heavy sagging insulation, wet ceiling textures, or higher humidity, either a 1/2-in. ceiling board or 5/8-in.
What is the average cost to hang and finish drywall?
Drywall installation costs $1.50 to $3.50 per square foot, depending on the ceiling height, drywall type, and level of finish. Drywall costs $0.50 to $0.80 per square foot for materials. The labor cost to hang and finish drywall is $1.00 to $2.70 per square foot. The cost to drywall a 12×12 room is $580 to $1,800.
Is there such a thing as 3/4 drywall?
3/4-inch drywall can also be used to patch or fix patches of drywall where the plaster has worn off or been removed. This drywall thickness is available in a variety of panel lengths. It is often used for walls and ceilings, and are considered a standard type of drywall for most residential spaces.
How many screws go into a sheet of drywall?
How Many Screws Per Sheet of Drywall. Use about 32 drywall screws per sheet of 4-foot by 8-foot drywall installed horizontally on a wall. This total is comprised of four screws on the five middle studs and six screws on each of the two sides.
What’s the difference in sheetrock and drywall?
Drywall is a flat panel made of gypsum plaster sandwiched in between two sheets of thick paper. It adheres to metal or wood studs using nails or screws. Sheetrock is a specific brand of drywall sheet. These terms are often used interchangeably.
How many sheets of drywall can a truck hold?
A truck can hold between 28 and 67 sheets of drywall. Many factors affect how many sheets of drywall you can carry, such as the size of your truck and the thickness and length of your drywall.
What size screw should I use for 1/2 drywall?
Choosing the right drywall screw Most common — 1-1/4”: Use 1-1/4” drywall screws to secure 1/2″ drywall installed on wood-stud walls. These coarse-thread screws typically feature phosphate coatings, which better protect against rust compared to zinc coatings.
Should I drywall walls or ceiling first?
Hang drywall on the ceiling first, then the walls. Check the ceiling for bowed joists using a 4-ft. level.
Is lightweight drywall good for ceilings?
There is no appreciable design advantage for ultralight drywall over standard drywall. This is a material that can be used for all wall and ceiling finish surfaces in any residential application.
Can I install drywall myself?
Although you can install drywall by yourself, the job will be much easier if you have a helper or two, especially if you are covering the ceiling. Hanging drywall is a labor-intensive project, and it’s only part of the job.
Should you stagger drywall seams?
It’s not necessary to stagger seams on ceiling drywall. However, because these joints are relatively difficult to finish—and tend to be noticeable in the finished product—it’s a good idea to stagger the drywall panels to make the joints less visible.
Is drywall supposed to touch the floor?
Drywall should never touch the floor. Allow for a 1/2-inch (1.27 cm) space between your new wall and your old flooring, so there is room for expansion of both materials without cracking the drywall.