Table of Contents
What size is my chainsaw chain?
To get the correct size, simply count 3 rivets on the chain and measure the distance between them from the centre points. Now divide this by half to get your size. As an example, three rivets that measure ½ an inch across divided by two gives you a pitch of a ¼ inch.
How do you measure the bar length on a chainsaw?
To measure a chainsaw’s effective cutting length (or simply, “length”): Place a tape measure at the very tip of the bar. Measure straight back to the point where the bar enters the chainsaw body. Round that measurement up to the nearest even number.
How do I know my chain size?
To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.
Can I put a 20 inch bar on a 18 inch chainsaw?
A chain saw engine turns a sprocket. Changing the bar and chain on your 18-inch chain saw to a 20-inch size will enable easier cutting of larger trees and branches. Larger chain saws cut through thicker trees and limbs. Put work gloves on to protect your hands and fingers.
What does 72 mean on a chainsaw chain?
72 = 3/8 pitch .050 gauge or 1.3mm. 73 = 3/8 pitch .058 gauge or 1.5mm.
How big of a tree can a 20 inch chainsaw cut?
20 chainsaw would cut through an 18″ tree diameter. 16 chainsaw would cut through a 14″ tree diameter. 10 inch chainsaw for 8″ in diameter. 6 inch chainsaw can cut a 4″ diameter.
What size tree can a 14 inch chainsaw cut?
Cutting down medium size trees with a trunk of about 14″ to 16” will require a larger chainsaw of about 16″ to 18” to fell the tree in one easy pass.
Can I put an 18 inch bar on a 16 inch chainsaw?
Yes, but you need a bar designed to fit on your saw. There are different designs for different saws, and the bar has to match the chain/sprocket configuration as well.
What is the difference between .325 and 3/8 chain?
325 is a smaller top cutter and tie strap it is easier to turn for a saw . The 3/8 is a bigger top cutter and tie strap . Mainly in a 20 ” chain has more cutters in .
How do you measure chain width?
It is measured by measuring the distance between 3 links, then dividing it by two. Chain pitch is shown with green markers, though it is determined by measuring the distance between 3 adjacent pins (blue mark) and dividing it by two.
How do I tell what grade my chain is?
So, to determine a chain grade, manufacturers must find the ultimate breaking strength. Then, divide that number by . 224805 to determine the ultimate breaking strength in newtons. Next, take that number and divide it by the total area of two cross-sections of a single link.
Can you put any bar and chain on a chainsaw?
More specifically, chainsaw bars vary both in mount geometry as well as in intended chain pitch and gauge, which must match those of your saw and chain. Because of this, you cannot just fit any bar on any saw.
What is the biggest chainsaw that STIHL makes?
The largest and most powerful chainsaw in the STIHL lineup. For the largest, toughest and most demanding jobs, professionals can find the performance they need in the MS 881 chainsaw. With its updated engine design and up to 41” guide bar length, the MS 881 is the largest, most powerful saw in the STIHL lineup.
How long does a new chainsaw chain last?
The chain should last many years; 5-6 years should be no problem. However, if the chainsaw chain is used properly and taken care of, it can last way longer.
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
What chainsaw chain cuts the fastest?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available. A full chisel chain also has a higher number of teeth than other chain options(full chisel is also known as a standard chisel chain).
What do Stihl chain numbers mean?
Find the gauge of the chain by locating the number stamped on the drive link. A 1 equals a 0.043-inch gauge, 3 equals a 0.050-inch gauge, 5 corresponds to a 0.058-inch gauge, 6 means the chain has a 0.063-inch gauge. A 0 means the chain has a 0.080-inch gauge, but this gauge size is found only on the Harvester chain.
Is a 20-inch chainsaw too big?
If you need a chainsaw for medium-duty work – jobs like cutting down smaller trees, for example – something in the 16”-20” range would be a better pick. If you are looking for a chainsaw for heavy-duty cutting – including felling larger trees – 22” and above might be more suitable.
Which chainsaw will cut a thick piece of wood faster?
Power. Gas chainsaws operate at greater speeds and have longer run times than electric chainsaws, making them ideal for cutting larger trees and branches or bigger jobs involving multiple trees. Since they have more power, they can drive long 20-inch bars, making them suitable for bringing down larger trees.
What size chainsaw do I need to cut firewood?
Many homeowners find that a 14- to 16-inch chainsaw is a good length for them. That’s long enough to limb-up trees, cut down small trees, and cut most firewood, but it’s also short enough that it’s easy to control the saw.