Table of Contents
There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes). This size looks pleasing on most cabinets, while still being large enough to grip comfortably.
How big should my drawer pulls be?
Determine Size While there is no set rule, we generally recommend that the pull length is approximately 1/3 of the cabinet or drawer width. Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter.
What size pulls for 36 inch Drawers?
Pulls 3-7 inches in length will sit the most comfortably on doors less than 24 inches tall. Cabinet doors 24-36 inches tall are best adorned with pulls 7-12 inches long, while cabinets taller than 36 inches such as pantries, built-in appliances and pullouts should be accompanied by pulls longer than 12 inches.
What are the standard drawer handle sizes?
Standard Drawers (about 12″ – 36″) Standard-sized drawers can use any of the following pull sizes: 3” (one or two), 4” (one or two), 96mm, and 128mm.
Can you change the size of drawer pulls?
One of the most common problems with changing the hardware on older pieces is when drawer holes don’t fit standard pulls. While it takes a little effort, you can easily move or resize hardware holes and still pull of a professional finish.
Can you mix cabinet pull sizes?
There’s no “rule”, it’s a matter of looking at as many kitchens as possible and figuring out the look you prefer. I also used a variety of sized pulls on drawers of different widths, and used Restoration Hardware.
How Big Should cabinet knobs be?
Knobs that are 1 ¼” to 1 ⅜” are standard for most applications. Any knob that is 1 ½ inches or larger is generally used on larger cabinets or if someone is really trying to make their hardware stand out and look more dramatic.
What size drawer needs two pulls?
Drawers wider than 18″ need two knobs/pulls, whereas drawer narrower need only one. If a drawer is wide enough to need two knobs, they should be set about 1/6th of the drawer length from each end (roughly).
Do you put pulls on fake drawers?
I would recommend putting pulls on the dummy drawers it allows for consistency. Good design is always consistent. It will also give the illusion that these drawers are not fake. The idea of putting a minimal intrusive towel bar works well because then it will serve more for function then aesthetics.
Where should Pulls be placed on cabinets?
For pulls (having two screws) on upper cabinets, the pull should be centered horizontally on the door stile and the bottom hole should be placed 2-1/2” up from the bottom of the door. For lower cabinets the upper hole should be placed vertically, 2-1/2” down from the top of the door.
Should I use knobs or pulls on kitchen cabinets?
There are no strict rules to follow when choosing whether to select a knob or a pull or both. One preference is to use knobs for all doors and pulls for all drawers. For any large door such as a pantry and any pull-out door (including pull-out base pantries or trash pull-outs), use a pull.
Should cabinet pulls all be the same size?
Consistent Size Throughout There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes). This size looks pleasing on most cabinets, while still being large enough to grip comfortably.
Are kitchen cupboard handles standard size?
Standard pull handles tend to range between 3 and 4 inches (96 to 128mm) in width, with smaller T-pulls often used for small cabinets and drawers. As a rule of thumb, the larger the drawer or cabinet, the larger the handle should be.
What size pulls for appliances?
The most common sizes of appliance pulls, in order of popularity, are 12”, 18”, 8”, 7” and 15”. Appliance pulls typically mount onto ¾” thick wood panels affixed to the appliance, rather than to the appliance itself. While fridges and freezers are the most common panel-ready appliances, they are not the only ones.
Should my kitchen cabinet pulls match my faucet?
Does cabinet hardware have to match your faucet? No. But, traditionally kitchens and bathrooms will match hardware finishes to the faucet to tie the finishes in the room together. Matching cabinet hardware to your faucet creates a cohesive look.
Can you mix cabinet hardware sizes?
Although it’s definitely possible to coordinate cabinet hardware in different finishes, it’s much easier and safer to mix different shapes of knobs and pulls in one matching finish.
What is the rule of thumb for cabinet hardware?
An oversized cabinet door or drawer needs a large piece of hardware for proper functionality. A good rule of thumb for traditional or transitional style pulls is that they should be about one-third of the length of the cabinet drawer. Drawers larger than eighteen inches wide may require more than one pull or knob.
What kitchen hardware is most popular?
Top 16 Most Popular Kitchen Cabinet Knobs and Pulls Alison Value Oversized Antique Brass Knob. 3-Inch Bit Pull (Oil Rubbed Bronze) Alison Value Center to Center Bar Pull. Somerset Melon Pull 7-inch (Brushed Satin Nickel Finish) Davenport Knob (Satin Nickel Finish) Square Twist T Handle Knob (Steel).
How many pulls should a drawer have?
For really wide drawers, we always recommend using two cup pulls, and then evenly space them. As a general rule of thumb, if your drawer is 30″ or wider, I like to use two cup pulls. Lastly, if you have tall drawers, you can either center them in the overall drawer, or install them on the top rail.
What is the fake drawer under sink?
Fake drawer fronts are used to continue the visual line created by other drawers or cabinet openings. They are often placed in areas in which a drawer would not be appropriate, such as directly under sinks.
Can you glue knobs on drawers?
For functional use, however, drawer pulls are typically installed with screws. Because drawer pulls must typically endure both vertical and lateral stress, glue alone will not effectively hold a functioning drawer pull in place.
Are cabinet pulls standard size?
What is the industry standard size for cabinet pulls? For cabinet pulls, standard center-to-center screw holes measure from 3 to 5 inches apart, or 64, 96, and 128 millimeters apart.
How high should cabinet pulls be?
For both upper and lower cabinets, the pulls should be installed vertically 2 ½ – 3 inches in from the corner of the door. For drawers, they should be installed horizontally in the center of the door. While there is no hard-set rule for the size of your pulls, consider using longer ones on larger drawers and cabinets.
Where do knobs and pulls go on Shaker cabinets?
Center of the Stile: Knobs and pulls can be placed halfway up the stile of your Shaker door. Keep in mind you’ll want to be able to reach the handles, since they will be placed higher up along the stile. Just Above or Below the Corners: Place the knobs or pulls 2” to 3” from the lower or upper corner.
