QA

Quick Answer: Are Toilet Seat Holes Standard

First, the distance between the two bolts that hold your toilet seat to your toilet bowl is standard across nearly all toilets, regardless of what kind of shape it has. These are called seat post holes and they should be about 5.5 inches apart from the center of one hole to the other.

Are toilet seat fixing holes Standard?

Modern toilets have standard hole centres. Replacement toilet seat kits usually have adjustment to allow fitting to the older or non standard types as well. These are the key measurements that you need, although most seats are adjustable so that they will fit the most common toilet bowl shapes.

Are all toilet holes the same size?

Not every toilet requires the same size hole, and clearances also vary, but there is a standard size and placement that works for most models.

Are toilet seat fittings different?

There are two types of toilet seat fixings: Bottom Fixings and Top Fixings. Bottom toilet seat fixings are fitted from the top and then tightened from underneath, often with wing nuts. The majority of modern toilets now come with top fixing seat installation as they are easier to fit and remove for cleaning.

What size is a normal toilet seat?

Typical width: 14″ – 14-1/2″ Typical round length: 16″ – 17″ Typical elongated/extended length: 18″ – 19″ Toilets are not stepstools!.

How easy is it to change a toilet seat?

Installing a new toilet seat is an easy DIY project. Whether you’re replacing yours because it’s old, or because you just want a new style, all you need are some basic tools and a few minutes. Unbolt the old seat, then pop the new one in place using the hardware included in your new toilet seat’s box.

Are there different sizes of toilet flanges?

Toilet flanges come in six different types and three standard sizes with the option of an odd fit. The types are based on the material from which they are made, that is aluminum, copper, brass, stainless steel, plastic, and cast iron. The sizes also range from a four by three, four-inch, or three inches flange.

Will an elongated toilet replace a round toilet?

An elongated toilet seat will technically fit on a round toilet, but the fit and comfort may be compromised. An elongated toilet seat will likely overhang a round toilet which may be fine unless the rim of the toilet is visible within the opening of the toilet seat.

What is the highest toilet height?

Convenient Height’s 20-inch extra-tall toilet is so far the tallest officially known toilet. The 17 to 19 inches of the comfort-height/ADA toilets is also considered high especially when compared to standard-height toilets which have a height that is not more than 17 inches.

Which is better round or elongated toilet?

Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space. Elongated toilet bowls measure up to 31″ from the wall, while round fixtures max out at 28″. Because round bowls are less expensive than elongated bowls, they save a few dollars, too.

How do I know what size toilet I need?

Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you’re considering.

Why would I want an elongated toilet bowl?

Elongated bowls are also considered more ‘hygienic’ in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.

How do I stop my toilet seat from sliding sideways?

A sliding toilet seat is one such problem. You should be able to stop it from sliding by tightening the nuts holding it to the bowl, but they loosen again after a short time and the problem reoccurs. The reason is that the holes for the bolts are purposely oversized so that the bolts won’t crack the porcelain.

Which type of toilet seat is best?

Our Top Picks Best Overall. Kohler K-4639-58 Cachet Quiet-Close Toilet Seat. Best Bang for the Buck. BEMIS 1500EC 000 Toilet Seat. Upgrade Pick. BioBidet Supreme BB-1000W Elongated Toilet Seat. Best Wooden. Mayfair 841EC 047 Enameled Wood Toilet Seat. Best Weight Capacity. Best Elongated.

Can I get a bigger toilet seat?

The Big John Toilet Seat is a 19-Inch wide, 1200 pound capacity, ADA Compliant toilet seat that raises the height by 2-1/2-Inches and fits on any standard toilet, round or elongated. Its large bumpers provide an anti-slip grip that makes it the most stable toilet seat available.

How many different sizes of toilet seats are there?

As we said, toilet seats come in two sizes: round and elongated. Every toilet seat is one of these two, indicated on its packaging. It’s not always easy to tell by looking at the seat, which is why measuring is important.

Are toilets universal size?

Are there different sizes of toilet? Yes, toilets come in a range of different sizes, that’s why it’s important to measure your existing toilet seat before you buy.

What are the different shapes of toilet seats?

Toilet seats don’t come in sizes, but they do come in two different shapes: round toilet seats and elongated toilet seats, each of which correspond to two different toilet bowl shapes. Round toilet seats are still the standard in most homes, and they’re the toilet seats you typically see most often.

How do you remove a no visible toilet seat bolt?

Use the necessary tool to pry open the hinge cover, taking care to apply gentle pressure to avoid damages. Remove the regular plastic caps, ease the flathead screwdriver beneath the cap and pop it up. Some caps are attached to the toilet seat while others pop right off. Removing the cap exposes the hinge mechanism.

How much does it cost to install toilet seat?

Install a toilet seat: national average cost The national average materials cost to install a toilet seat is $47.78 per seat, with a range between $28.25 to $67.32. The total price for labor and materials per seat is $133.78, coming in between $106.05 to $161.52.