QA

Question: Can Plunging A Toilet Damage The Wax Ring

2. Plunging always works, or Plunging can’t harm the toilet. Once again, absolutely false! When your stoppage is not in the pee trap of the toilet but in the pipe just below the toilet, you are usually damaging the wax ring when you place the plunger in the bottom of the toilet bowl and start pushing.

Can plunging break a wax seal?

Plunging down too hard A hard thrust downward can break the wax seal between the toilet and the floor, causing a leak. And a really hard thrust could even crack the bowl. The proper toilet plunging technique: Push down gently to get all the air out of the plunger and to get a good seal.

What causes a wax toilet ring to fail?

One very common cause of wax ring problems is loose toilets. If the toilet is not firmly mounted, or gets loose to the point where it rocks a bit, it can cause the wax ring to lose its seal. When installed, a wax ring is compressed to fit the flange and the toilet, creating the seal.

Can a wax ring clog a toilet?

Sometimes the wax seal between the bowl and the floor flange can cause an obstruction. Too much wax and/or misalignment can choke the flow. The proper water level in the tank is controlled by the ballcock (AKA fill valve) being in proper working order and properly adjusted.

Can you double up toilet wax ring?

Place the Wax Ring and Toilet Do not be tempted to stack up two wax rings because this setup tends to leak. Installing a flange extender or using an extra-thick wax ring will work much better in the long run. Place the wax ring on the closet flange, not on the toilet.

How long should a toilet wax ring last?

The wax ring is exactly what it sounds like: a ring made of sticky wax that helps form a watertight seal between the bottom of the toilet and the sewer pipe. It requires no maintenance and can last 30 or more years, often as long as the toilet itself.

How much does it cost to replace toilet wax seal?

Replacing a wax ring, also referred to as a wax seal, will run between $50 and $200, including labor and materials. While the ring itself is inexpensive at $2 to $10, replacing it takes time and expertise. The closest flange may also need replacing, which can increase total project price.

How do I know if my toilet wax ring is bad?

The first sign of a failing wax ring is water that seems to be seeping out of the base of your toilet. Other signs to look for include: Water stains on the ceiling from the floor below. A lingering, unpleasant bathroom odor from escaped sewer gasses.

Is there something better than a wax ring?

Wax-free toilet seals are made out of a heavy duty rubber, so they’re flexible enough to shimmy into the flange without smearing a wax ring. Wax-free seals can also be reused. As long as they’re still attached to the bowl in good condition, you can reinstall the toilet without replacing the seal.

Can you replace a toilet wax ring yourself?

Made from a molded wax loop around a short plastic tube, wax rings are pretty foolproof, inexpensive and shape themselves to fit almost any toilet and floor drain. Once you drain the toilet tank and disconnect the water supply, it’s a good time to replace the flush valve.

What dissolves toilet ring wax?

A rag soaked in mineral spirits will remove toilet wax ring residue quickly. Mineral spirits are an excellent solvent that cut through many types of grime, including wax. Apply mineral spirits to the wax residue and scrub with a rag or cloth to remove it.

Do you caulk around a toilet base?

Caulk prevents a fouling area. If mop water, bathtub water, or a less pleasant “bathroom liquid” gets underneath the toilet, there is no way to clean it up. Caulking around the base of the toilet will prevent this from happening.

How often should you change the wax seal on a toilet?

The wax keeps water from leaking as it passes from the toilet to the drain pipe. It also seals against foul sewer gas odors. A wax seal will often last the life of the toilet, 20 or 30 years, without needing to be changed.

Are there different size wax rings for toilets?

Wax rings come in two diameters, 3 inches and 4 inches, because — as you might expect — those are the two standard sizes for toilet waste openings. Besides diameter, thickness is also an important parameter when it comes to wax rings. Again, there are two possibilities: regular and extra thick.

When should you use an extra thick wax ring?

If your flange is floor level or slightly below then you can use an extra-thick wax ring. If the flange is lower than a 1/4” below the floor level then you should use a flange extension to raise the flange height or remove and replace the old floor flange and set it to the right height.

Does toilet flange sit on top of tile?

5 Answers. The toilet flange needs to be on top of the finished floor. Meaning the bottom edge of the flange needs to be on the same plane as the toilet. So if your toilet sits on the tile, the flange needs to be on top of the tile too.

Which is better toilet wax ring or rubber?

Using a wax-free seal makes clean up easier and there’s less room for error. If you need to remove the toilet base with a wax ring, you’ll need to purchase another ring to reinstall the toilet. When you use a wax-free seal, it’s reusable as long as it’s in good condition.

Do I need to replace the wax ring on my toilet?

Whenever you remove a toilet for any reason, you will need to replace the wax ring seal between the toilet and the toilet flange (sometimes called a closet flange) attached to the floor. A wax seal is used because it resists mold and bacteria and retains its sealing ability after years of use.

What causes water leak around base of toilet?

Why is the toilet is leaking from the base? The leak is usually caused when the seal under the toilet fails. Wait until a new puddle appears on the floor, then check to make sure the water is seeping out from under the toilet and not coming from a loose supply tube, faulty shutoff valve, cracked tank or sweaty bowl.