Table of Contents
No – you can plaster over artex if that is your preference. What’s more, you will not be permitted to cover an artex surface that has been proven to contain asbestos.
Can you Artex over existing Artex?
So yes you can artex over artex, like you say PVA it first though. But with a swirl pattern you should not need to artex over it all as it can be repaired.
How can I cover Artex without plastering?
Part 1 – Prepare Artex Ceiling Surface Dilute the PVA with a 1:1 ratio with water and mix well. Using a large emulsion brush, paint the PVA solution on the ceiling and leave the PVA to dry (roughly one hour) Apply a second coat and then leave to dry again.
Is Artex worth removing?
Artex is often considered outdated and removing it can be difficult and dangerous if you’ve never done it before and are not using a safe and non-toxic remover like X-Tex. You can plaster over the textured wall or ceiling covering however this is much like sticking a plaster over something that may rear its head again.
Can I Overboard an Artex ceiling?
The good news is if the coating/Artex is in good condition then it is safe to apply a sealant, skim over it with a new layer of plaster or cover the coating with new plasterboard. You can plasterboard over the ceiling as it it as long as you locate joists accurately and screw the plasterboards to the joists.
Do I need to PVA artex before plastering?
Yes you need to apply 1 coat of PVA to make sure the plaster adheres. The PVA can be applied the day before as the artex provides a rough surface which will act as a good key.
How can I make my artex ceiling look nice?
Using the spatula, load the smoother with Artex Easifix Smooth-It. Apply an even coat with firm, sweeping strokes. When the whole surface is covered, allow to dry until firm to the touch. Repeat the process as many times as required to reach the desired smoothness.
Does artex devalue house?
Now, Artex ceilings can actually devalue a house. It’s very difficult to match up new repairs onto old Artex patterns. Undamaged and painted Artex is usually harmless. However, many people don’t like asbestos–based building materials in their home and will take any opportunity to remove it.
Can I remove artex myself?
Can I Remove Artex Myself? Yes, as long as it has been passed as safe from asbestos and you are comfortable doing so. Alternatively, any tradesperson will happily take on the job for you.
Can you skim over artex walls?
Plastering over artex is a very common part of our trade now. Any artex must have a backing (bonding) coat applied first as as skim coat is only 3 mm thick. Once the bonding coat is dry you apply PVA to reduce suction when skimming the top coat. This will give you the desired flat finish.
Is it hard to remove Artex?
Once confirmed that the artex® does not contain asbestos fibres and it can be removed safely with no risk there are a number of different ways that artex ceiling removal can be done. Firstly it can be “steamed” off using a wallpaper steamer. This can be very messy and is also a very slow process.
How much does it cost to smooth a textured ceiling?
The experts recommend applying drywall compound to any problem areas with a drywall knife, skimming smoothly, then priming and painting the ceiling. Expect to pay about $30 to $200 in materials to do this yourself, or about $1 to $3 per square foot for labor and materials if you hire a professional.
Can I plasterboard over an existing ceiling?
It is possible to fix plasterboard over an existing ceiling, but you’ll need to determine where the joists are first. The other option is to strip off the existing ceiling to reveal the joists — this should be the preferred option as it also results in less build-up.
How much does it cost to overboard skim a ceiling?
The average cost to overboard and plaster a ceiling in the UK is £400, although smaller box rooms will likely sit more around the £250 mark. Depending on the size of your ceiling, the task will take anything between 6-12 hours for a small to medium-sized room.
Should I skim over artex?
Skimming Over Artex. We wouldn’t recommend scraping artex with asbestos in it, even with masks. If you have patterned Artex, it’s possible to coat it with PVA to achieve a flat surface, and then skim it. Stippled Artex can’t be treated effectively in this way.
Is it easy to skim over artex?
Plastering over the artex is much harder than plastering over a normal surface such as plaster board or a surface that has previously been plastered. Skimming a 16′ x 13′ artex ceiling. On this job I had to skim the whole room including the artexed ceiling and the artex above the picture rail.
What is the point of artex?
Artex differs from plaster in that it was marketed as a material intended to receive a textured finish, thus enabling a ceiling to be finished without plastering skills. It was very widely used in Britain in the 1970s, mainly with the familiar stippled and swirled patterns. Artex was also occasionally used on walls.
How do you get rid of Artex swirls?
The most popular way to remove Artex is to use a steamer to loosen it and then ease it off with a scraper. This process is slow but effective, if you hold the steamer in the same place for too long, however, the Artex will liquefy and run everywhere making a mess.
What is the best paint roller for Artex ceiling?
A long sleeved mohair roller would be used to cover a textured wall or an artexed ceiling whereas a smooth foam roller would be used to paint emulsion on a nice smooth, plastered wall. The length of the hair on a roller is called the nap or pile of the roller.
