Table of Contents
There might be several causes for this: The desired objects are within a viewport on a layout and the viewport is not active. The layer of the objects are locked. The edit mode of an xref is active. The program is corrupted.
How do I select a line in AutoCAD?
Select objects by clicking them or by using a window or crossing method. To specify a rectangular selection area, click and release the mouse button, move the cursor, and click again. To create a lasso selection, click, drag, and release the mouse button.
Why is my AutoCAD not snapping?
Turn off Snap to Grid by pressing the F9 key or setting the system variable SNAPMODE to 0 (zero). Increase the cursor aperture size by going into Options, to the Drafting tab, and moving the slider right for ‘Aperture Size’ to make it larger.
How do you unblock lines in AutoCAD?
If you need to select or move the file, you can unlock it. Click an empty space on the diagram to deselect anything that may already be selected. Right-click, and then click CAD Drawing Object > Properties. Click to deselect the Lock size and position and Lock against deletion checkboxes.
Why can’t I change linetype in AutoCAD?
FAQ: Why doesn’t the change I made to linetype display in the drawing? If you change the linetype of a layer or an object but the object remains a continuous line, check the Ltscale system variable. It should be set to your drawing scale factor. If this doesn’t work, set the Viewres system variable to a higher value.
Why can’t I select multiple lines in AutoCAD?
Multiple objects can still be selected with selection or crossing windows, and by holding the Shift key while clicking items. This issue occurs with all commands that require selecting objects: ERASE, COPY, TRIM, EXTEND, and so on.
How do I access my Matchprop settings?
In order to access the settings for MATCHPROP: Type MATCHPROP, select an object, right-click and select SETTINGS. Select an element with the desired properties. You cannot have anything selected. Type MATCHPROP, right-click and select SETTINGS.
Where is osnap in AutoCAD?
From the pull-down menu select Tools Drafting Settings… and when the dialogue box appears, click on the Object Snap tab to display the Object Snap settings. Check the boxes against the Center and Endpoint osnaps if they are not already selected.
How do I enable snaps in AutoCAD?
Note: Snap mode can be turned on and off with the F9 key.To Turn On Grid Snap and Set the Snap Spacing On the Status Bar, right-click on snap mode Find and select Snap Settings. In the Drafting Settings dialog box, Snap and Grid tab, click Snap On. Under Snap Type, make sure Grid Snap and Rectangular Snap are selected.
How do I reset my AutoCAD settings?
From the AutoCAD menu, click Preferences. In Preferences, click the Application tab. Click the Reset Application Options button. Click Reset AutoCAD.
How do you unlock a block?
Unblock a number Open your Phone app . Tap More . Tap Settings. Blocked numbers. Next to the number you want to unblock, tap Clear. Unblock.
How do you explode an Unexplodable block in AutoCAD?
The trick is to open the block definition dialog box (type “b”, or “block”) without selecting anything. Then on the drop down list search for the block you are unable to explode. You will see that the “allow exploding” option is unselected. Select it and click OK.
How do I reset a block in AutoCAD?
Shortcut menu: Select a dynamic block reference in a drawing. Right-click in the drawing area and click Reset Block.
What does Ltscale do in AutoCAD?
The LTSCALE system variable is used to control the global linetype scale factor in the drawing. Changing this scale factor, the appearance of linetypes in the drawing also changes. For example, an LTSCALE setting of 1 means that the dash length specified in the linetype definition is read directly as drawing units.
Why isn’t my linetype showing in AutoCAD?
If a linetype contains text characters and those do not display at the correct size in a drawing, most likely the text style that the linetype uses has a defined height applied to it. Enter the STYLE command. Select the text style. Change the height to 0 (zero).
How do I open a linetype file?
In the Linetype drop-down list, click Other. In the Linetype Manager dialog box, click Load, and in the Load or Reload Linetypes dialog box, click File. In the Select Linetype File dialog box, choose a LIN (linetype definition) file, and click Open.
How do I change selection mode in AutoCAD?
To Change Object Selection Settings Right-click in the drawing area, and choose Options. On the Selection tab, choose the settings you want. Among other settings, you can set. Whether objects to be selected are previewed during selection. Whether selected objects are highlighted.
How do you quick select in AutoCAD?
Use Quick Select to select objects in your AutoCAD drawing Home tab> Utilities panel>Quick Select. With no command active, right-click in the drawing area and choose Quick Select. Click the Quick Select button in the Properties palette. Type qselect on the command line.
What is Pickadd?
Turns on PICKADD. Each object selected, either individually or by windowing, is added to the current selection set. If the SELECT command is used, keeps objects selected after the command ends. Note: You can add objects to, or remove objects from the selection set by pressing SHIFT while selecting.
Where is Matchprop in AutoCAD?
You can open the ‘Match Properties’ command by clicking on the icon (below left) on your toolbar, or by typing in ‘matchprop’ (below) in the command line at the bottom of your screen.
Where is the Draworder tool is located in AutoCAD?
Tool Set: Drafting tab > Modify panel > Draw Order drop-down. Menu: Tools > Draw Order.
What is AutoCAD Matchprop?
The MATCHPROP command copies some or all of the properties of one object to other objects. In AutoCAD MEP 2021 toolset, MATCHPROP only copies AutoCAD object properties, such as color, layer, linetype, and lineweight.
