QA

Question: Curtain Pins How To Use

How do you use drapery hooks on regular curtains?

One of the simplest ways to put hooks onto a curtain panel of any kind is to simply pin through the top of the curtain header. There are pieces of fabric constructing the top hem, put your pin hook through the back piece of fabric only, and it will conceal the hook and will not be visible.

Can you use drapery pins on regular curtains?

If your curtain fabric is very thin or soft, you may find that it hangs funny when you put it up with drapery hooks. If so, you can use pleating tape and pleating pins to make the top of the curtain a bit stiffer.

How do you use curtain pins with rod pockets?

Drapery pins (figure A) are inserted into the back (lining side) of the panels. The sharp, pointed end goes into the fabric. Insert the straight end of the pin all the way until it looks like figure B. The curved end of the pin will go through the eyelet of your drapery ring or rod carrier.

What kind of curtains use pins?

Drapery Pins Are Most Often Used On Pleated Draperies and Valances. You’ll often come across a pleated drapery, like the pinch pleated drapery below. This is what the drapery looks like from the front. Notice the rings coming from behind each pleat.

What kind of curtains use drapery hooks?

What hooks do you need for Pinch Pleat Curtains? These are the curtains that have the pleats sewn into the top. They come as either double or triple pleated curtains, can be used on either a track system or on a rod/pole with rings both use the same type of hooks.

How do you hide clips on curtain rings?

HERE’S THE QUICK TIP ON HOW TO HIDE CURTAIN RING CLIPS: just pinch the back of the curtains and clip the rings an inch or so down from the top.

What kind of curtains do you use with clip rings?

Rings with clips – The ring clips have “pinch-clips” that grip along the top of the drapery panels, securing them in place. Rings with clips are only recommended for use with light to medium weight drapery panels; heavyweight panels tend to pop the clips open and become hard to manage.

Can you use hooks with rod pocket curtains?

Measure and mark on the back of each panel with chalk where to insert each hook. Beginning at one end, attach a hook ring to the back of the curtain rod pocket where indicated with chalk. Attach hooks an inch down to ensure the hooks don’t show when you hang the curtains.

How high should you hang curtains?

A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.

What are curtains called with hooks?

Pencil Pleat They are widely used in all sectors and homes. Pencil pleat headings are normally three rows of string threaded through it for three hook positions. The hooks which can be metal or plastic can be put in 1 of 3 pockets depending whether you want the curtains to be underslung or to cover the track.

How far apart do you place curtain clip rings?

I like to space ring clips approximately four inches apart so that there is a handsome fold between each clip in the drapery panel. Start by clipping each end of the panel. Next, clip the middle. Finally, space the clips evenly apart as close to 4 inches as possible.

How do professionals hang curtains?

Rest easy — we’ve got you covered with our fool-proof curtain-hanging tips and information. Hang them high. Especially in rooms with low ceilings, be sure to hang your curtain rod as high as possible. Hang them wide. Hang them in the right length. Hang the right amount of panels. Hang the right style of panel.

How do I pin my curtains too long?

Ideas to Shorten Curtains Without Hemming Move the Rod. The easiest way to shorten curtains without hemming is to move the curtain rod. Tie Them Back. Install a tieback and blouse the excess curtain over the tie creating a swagged effect. Fuse or Glue. Pinch & Pickup. Fake a Valance.

Do curtains have to touch the floor?

Yes, curtains should be long enough to touch the floor. With a few exceptions, the longer the curtains are the more stylish and elegant it will look. This is why most standard ready-made curtains are lengthy. But the reality is that various decorating styles use different curtain lengths.

What is curtain rod pocket?

The most classic and common of all methods of hanging curtains, a rod pocket is a sewn-in pocket, or casing, at the top of a curtain panel that easily slips over a rod and conceals it. Curtain panels hung this way bunch nicely and have a simple, casual look. Rod Pockets work well with layered window coverings.

How far should curtain rod be from side of window?

The standard distance from the window casing to the end of the curtain rod (excluding finials) on each side of the window should be four to 10 inches. As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame.

How far should curtains be off the floor?

The proper position is ½ inch above the floor for free hanging curtains. This distance allows for mopping and cleaning while creating the illusion that the curtain touches the floor.

How far should a curtain pole extend past window?

For a typical window without architraves, we recommend poles/tracks overhang the width of the window by not less than 15cm (6″) each side (excluding finials). Mark the pole/track and check your measurements again.