Table of Contents
Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
Is 2 feet deep enough for fence posts?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
How deep should an 8 foot post be in the ground?
In general, holes should be at least 3 feet deep for posts that extend 8 feet or more above ground level. Posts that extend 6 feet above ground level should have holes at least 2 1/2 feet deep.
How deep should a 5 foot fence post be?
The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post.
Is cement required for fence posts?
Do Fence Posts Need To Be Set in Concrete? No, fence posts don’t need to be set in concrete, and there are plenty of other ways to fix your posts if this feels a bit too permanent. If you are using wooden posts, concrete may actually be the worst option.
Should fence posts be set in concrete?
Setting Fence Posts in Concrete Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.
Do you need planning permission for an 8 foot fence?
You need planning permission if your fence height including trellis exceeds 2 metres (6.56ft) above ground level. If your fence height is higher that 1 metre (3.28ft) and you live next to a highway used by vehicles or the pedestrian footpath of such highway, then you need planning permission.
How deep should post be for 8 foot fence?
How Deep Should a Fence Post Be? For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.
How shallow can a fence post be?
For any type of fence, the depth of the hole you must dig depends on how tall the post will be above ground. You should always bury one-third of your fence post underground. For a 6-foot fence, for example, you need a 9-foot post, so that 3 feet can be underground.
Can you put dry concrete in a post hole?
Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.
How many bags of concrete do you need for a fence post?
1 – 4 bags of concrete per fence post are typically what’s needed. This depends on the type of soil, fence design, height, post size and bag weight. In general the depth of the post’s hole needs to be 1/3 to 1/2 of the above ground height of the post.
How do you dig a 4 foot post hole?
How to Dig a Hole: Pro Tips Step 1: String your line and pound the stakes. Step 2: Carve out a soil divot with a spade. Step 3: Loosen earth with a tile shovel. Step 4: Use your clamshell digger. Step 5: Use a reciprocating saw on large roots. Step 6: Dislodge rocks with a digging bar. Step 7: Tamp the soil with the other end.
Can you reuse fence posts with concrete?
Pulling up an existing fence post to reuse can be quite a task. Posts with concrete at the base are the most difficult to remove and reuse because the concrete base is larger than the post, which makes pulling it up through the ground much harder.
Will wooden posts rot in concrete?
Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. This allows any moisture that gets between the concrete and the bottom of the post to percolate through the gravel and away from the bottom of the post.
How long will a treated 4×4 post last in the ground?
How Long Will A Treated 4×4 Last In The Ground? (Explained) A treated 4×4 will last 20 to 25 years in the ground if the conditions in the soil and climate are favorable. That number could increase to 40 to 75 years if you install the treated 4×4 in a cement ring rather than the soil.
Should a fence post wiggle?
WOBBLY wooden fence posts should be repaired promptly before they cause other fence parts to loosen. Posts that have been in the ground for less than five years usually wobble because of improper installation; ordinarily, tightening them is fairly easy.
What is the legal height of a fence between Neighbours?
The laws actually state that a fence can be as high as 100 meters. However, this is only allowed if proper planning permits have been obtained. This means that any fence under 2 meters in height does not require a permit. This simple law has a few complications to it.
What is an Article 4?
An article 4 direction is a direction under article 4 of the General Permitted Development Order which enables the Secretary of State or the local planning authority to withdraw specified permitted development rights across a defined area.
How high can you erect a fence without planning permission?
Planning permission is generally required if the fence is higher than 2 metres – and potentially as low as 1 metre if the fence is by a road. You can also apply for retroactive planning permission, if your fence accidentally exceeds regulations, or if another person can raise reasonable objections.