Table of Contents
Dig 6-inches to 8-inches for end and corner posts. Dig 4-inches to 6-inches for line posts. Make the holes a third of the length of the pole length plus 4-inches for gravel.
Do chain link fence posts need to be cemented?
You can install a chain link fence without using concrete, but it is not recommended. Anchoring each fence post in concrete is the best way to ensure your fence will stand straight and tall for many years.
How far apart do chain link fence posts need to be?
SPACING FENCE POSTS As chain link fence posts are smaller and sturdier than many other types, the holes should be smaller and can be farther apart. Follow the fence manufacturer’s instructions for spacing, which typically ranges from 4-10′ apart—spacing should not exceed 10′ on-center. (fig.
How much concrete do I need for a chain link fence post?
Chain Link Fences Terminal posts require a hole with an eight-inch diameter that is anywhere from thirty inches to three feet deep. It takes about . 9 cubic feet to fill each of these holes. Three fifty-pound bags of concrete should be plenty to set each terminal post.
Are chain link fence posts set in concrete?
Traditionally, chain link fences are held in place by buried posts surrounded in concrete. However, it is possible to install a chain link fence without concrete. With a hole that is the proper size, either gravel or a polymer backfill can keep fence posts in place for many years.
Is 2 feet deep enough for fence posts?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
How deep should a metal fence post be?
The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
How much does a 100 foot chain link fence cost?
Average Chain-Link Cost Per Foot Linear Feet 4-foot Tall 6-foot Tall 50 $600 $750 100 $1,200 $1,500 150 $1,800 $2,250 200 $2,400 $3,000.
Do I need a top rail for chain link fence?
Almost all permanent chain link fences have a top rail to support the weight of the chain link fabric and keep it from sagging over time. Often, chain link fences taller than 6′ also have a mid-brace rail, at least on each section between a terminal post and line post.
How deep should a 8 foot fence post be?
In general, holes should be at least 3 feet deep for posts that extend 8 feet or more above ground level. Posts that extend 6 feet above ground level should have holes at least 2 1/2 feet deep.
What type of concrete is used for chain link fence posts?
Fast-setting concrete is ideal for installing fence posts since it doesn’t need to be mixed in a bucket or a wheelbarrow. Once you’ve finished digging your post holes, add about three to four inches of gravel into the bottom and compact it using a post or a 2×4.
Can you put dry concrete in a post hole?
Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.
How do you install a chain link fence without digging?
5 Ways to Set a Fence Post Without Digging A Metal Spike Anchor and a Sledgehammer. If you are not wanting to dig to set your fence post, a metal spike anchor might be the easiest option. T-Post Driver. E-Z Spike. Steel Posts in the Ground. Above the Ground Fences.
Is 18 inches deep enough for a fence post?
The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post. For our six-foot-high fence post, we would need a hole that’s 36 inches deep and 12 inches in diameter.
Is 3 feet deep enough for fence posts?
Is 3-Feet Deep Enough For Fence Posts? As a general rule of thumb one-third of your post should be underground, the other two-thirds above. Let’s take a standard 6foot (72 inches) fence as an example. You will need a 9foot (108 Inches) post so that 3ft (35 inches) can be underground and 6ft can be above ground.
How shallow can a fence post be?
For any type of fence, the depth of the hole you must dig depends on how tall the post will be above ground. You should always bury one-third of your fence post underground. For a 6-foot fence, for example, you need a 9-foot post, so that 3 feet can be underground.
How do you put a steel post in the ground?
Dig the hole so it’s at least twice the diameter of the metal post. Place 6 inches of gravel in the bottom of your hole for drainage. Place the metal post so it sits securely in the bottom of the hole atop the gravel and is centered. Shovel or pour 8 to 10 inches of gravel into the hole around the post.
