Table of Contents
The standard depth is 12 inches, but you can find other sizes, from 15 to 36 inches.
What is standard drawer depth?
Depth: Standard depths are 14-inches, 16-inches and 20-inches. Height: The height of the drawer refers to the height of the drawer face. The actual height of the box is usually less.
What is the standard size of a kitchen drawer?
Standard non-custom kitchen cabinetry generally offers drawer widths from 12 inches to 24 inches, increasing by 3-inch increments. If the standard drawers available don’t fit into your kitchen design, you can order custom drawers from a cabinetmaker.
How far does a cabinet drawer pull out?
Using a pull that is approximately 1/3 the length of the drawer is a good rule of thumb. For modern cabinetry, you can use extra long pulls that span nearly the entire width of each cabinet.
How deep should closet drawers be?
Drawers for folded clothes should be set at a minimum of 18” (45.7 cm) with deeper drawers for multiple rows of folding clothing at a depth of 24” (61 cm). Deep drawers are consistent with standard closet depths 24” (61 cm).
How do you measure the depth of a drawer?
Begin by measuring along the bottom floor of the drawer at the back edge, middle, and front edge. Check for variations across the height of the drawer as well. Take the smallest of these measurements. Repeat this step for the depth measurement on the left edge, middle, and right edge across the floor and the height.
How deep are bottom kitchen cabinets?
A standard base cabinet should be 24 inches or 61 cm in depth. Since refrigerator manufacturers now make deeper fridges, it directly creates a need for deeper countertops or cabinets. If your kitchen isn’t too large, there are base cabinets as small as 12 inches in depth which can fit into tiny spaces in the kitchen.
How deep are upper kitchen cabinets?
Standard wall cabinets (sometimes referred to as “upper cabinets”) are 12 inches deep; standard base (below-counter) cabinets are 24 inches deep.
How deep is a standard kitchen base cabinet?
The depth measurement is taken from the front outer front edge of the cabinet to the wall. Stock base cabinets are generally 24 inches deep (not counting countertop overhang). Deeper base cabinets make it difficult for you to reach the back of the counter or to plug-in appliances.
What size pulls for 30 inch drawers?
Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter. Large Drawers that are 30” to 48″will require a pull that is longer than 8″ or a knob that is 1″ in diameter or greater. Using two pulls or knobs for a large drawer also works great.
How far do kitchen drawers come out?
Lower cabinet drawers have depths from around 17 inches to 23 inches deep while drawers located in upper cabinets may start around 12 inches deep. We’ll look at the different types of drawers to give you a sense of their dimensions in the post below.
Where should drawer pulls be placed?
Pulls should be placed horizontally on drawers. For small drawers (less than 24” wide) center the knobs or pulls in both directions. Just like on larger drawers, pulls should be placed horizontally. Knobs and pulls can also be placed centered at the very top of the drawer panel, where the drawer rail begins.
How deep should closet cabinets be?
As always, you want to make sure you’re getting the best possible storage solution for your personal wardrobe. The depth of your closet cabinets and panels range from 14 inches to 24 inches. Most clothing items that are hung, including dress shirts and blouses, jackets and coats, will fit inside a 22-inch-deep area.
How shallow can a closet be?
The standard minimum depth for a reach-in closet is 24 inches, but a closet intended to store coats or other bulky hanging items may need to be as deep as 28 inches. A closet less than 22 inches deep isn’t deep enough to allow hanging clothes.
How deep are standard closet shelves?
Some Important Numbers to Keep in Mind. A clothes closet should have a minimum depth of at least 24 inches deep, so the clothes can clear the back wall. Shelves for women’s shoes should be spaced about 6 to 7 inches apart. Shelves for folded clothes should be placed around 12 inches apart.
How thick are drawer slides?
Light duty slides might be as thin as 1/2″, while heavy duty slides may be over 3/4″ thick. Face frame cabinet slides are easier to install using the specific, optional, face frame brackets. Length sizing is usually simplified by checking manufacturer’s charts, where the drawer size and cabinet depth are both stated.
How do you find the area of a drawer?
Measure the height and width of the drawer opening and add 1-1/2 inches to get the face size of the drawer. For example, if the drawer opening measures 18-by-22 inches, you will need to cut one piece 3/4-by-19 1/2-by-23 1/2 inches.
How deep are kitchen cabinets UK?
Kitchen cabinets are usually 60 cm deep and have widths that are multiples of 10 cm or 15 cm. This sizing is illustrated by the base units shown below. Drawer units are usually offered in a variety of widths. Larder units are usually 30 cm wide and appliance units 60 cm wide.
How thick should kitchen cabinets be?
Side and floor panels inside the cabinet should be least a half-inch thick. Side panels should be routed with a groove to support the drawer base. Floor inside the cabinet should be fitted into the routed side panel. Shelves inside the cabinet should be least three-quarters of an inch thick.
