Table of Contents
Most counter-depth fridge dimensions top out with a depth of around 30 inches. By contrast, traditional refrigerators can be as deep as 36 inches. To make up for the shallower depth measurement, standard counter-depth fridge dimensions tend to be wider (around 36 inches).
What is difference between counter-depth and standard depth?
Standard Depth: Which Refrigerator is Right For You? The main difference between counter depth and standard depth refrigerators is dimension. Counter depth fridges are shallower to achieve a built-in appearance while standard fridges generally offer more capacity.
What is the most shallow depth refrigerator?
Above: The Liebherr 36-Inch Counter-Depth 4-Door French Door Refrigerator (CBS2082) is the most shallow on our list at 24 inches deep.
Why are counter depth refrigerators more expensive?
To achieve the same capacity as a standard appliance, a shallower counter-depth appliance needs to be considerably wider. This can mean a reduction in countertop space, as well as a wider door that requires a larger swing radius. And this special design may cost more than a standard appliance.
How far can a refrigerator stick out past the counter?
Standard refrigerators are typically 32 to 36 inches deep or more, and since countertops are normally about 25 inches deep (24 inches for the base cabinet with a 1-inch overhang) this means that a standard refrigerator will stick out from adjoining countertops by 6 inches or more.
What fridge has the smallest depth?
A counter-depth refrigerator matches the depth of your kitchen countertops (24-25 inches), and therefore, has a shallower depth than traditional refrigerators (35-36 inches). To compensate for their narrower depth, counter-depth fridges are typically wider and a bit taller than traditional fridges.
Do counter-depth refrigerators have less space?
Because counter-depth fridges are shallower than standard ones, they tend to offer less cubic feet of interior food storage space. Standard fridge/freezer combos average between 22 and 31 cubic feet of space, while baseline counter-depth fridges are between 20 and 23 cubic feet. Shallower depth can be limiting.
What is standard countertop depth?
While the standard kitchen countertop depth is 25 ½ inches, most kitchen island countertops can go up to 27 or 28 inches deep and over 30 inches deep if it comes with a breakfast bar. The island countertop depth depends on the availability of space.
Are counter-depth refrigerators wider?
With a refrigerator depth between 23 to 27 inches, counter-depth fridges are typically wider and taller than standard-depth fridges to compensate for the reduced volume and to be more space-efficient. Counter-depth units usually have French doors or side-by-side doors.
Should refrigerator be flush with cabinets?
In short, the answer is yes. Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you’ll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.
What is the difference between counter-depth and regular refrigerators?
Counter depth refrigerators tend to be shallower than standard depth but they generally will be wider or taller. This unit typically is 23 to 27 inches deep; the shallower depth makes it easier to grab items near the back of the fridge and provides a blended look with it’s surroundings.
Will a 36 inch refrigerator fit in a 36 inch opening?
Usually! A 36″ refrigerator is designed to fit into a 36″ finished opening!! A 36 inch wide refrigerator should only be placed in an opening at least as wide as the manufacturer’s recommendation. Remember that appliances are NOT built to machine-shop tolerances and neither are cabinets.
How far should a refrigerator be away from the wall?
You should leave between 12 to 12 of clearance between the walls and cabinets. You should leave at least 1 inch of clearance in the rear. 1-2 Inches is ideal because it will help push the fridge out slightly away from the wall.
Do refrigerators come in 24 inch depth?
If you’re dealing with a kitchen full of tight corners, the depth of a refrigerator is just as important as its width. What you need is a slender 24-inch wide counter-depth fridge; counter-depth meaning 24 to 29 inches deep (to stand flush with standard 24- and 25-inch cabinets).
How deep are standard refrigerators?
In contrast, most full-size standard-depth refrigerators are more than 30 inches deep, commonly in the 35- to 36-inch range. This means a traditional refrigerator may jut out more than six inches from the edge of the countertop.
How far do kitchen counters come out?
How far should a countertop overhang on the side? Generally, the standard overhang of a countertop is 1 to 1 ½ inches from the cabinet, while the exposed ends of a countertop will usually have a ½ inch overhang, and the ends that meet a wall don’t have any overhang at all to keep the fit flush to the wall.
What is the standard overhang for a kitchen countertop?
A countertop overhang is a part of the countertop that extends past the cabinets and covers the drawers and cabinets to help prevent spills of crumbs and liquids from falling off the edge of the counter. A standard countertop usually has an overhang of 1½ inches.
What is the standard height and depth of a kitchen counter?
(Standard kitchen counter height and depth is generally 36″ high and 25″ deep.).
What are standard countertop dimensions?
Countertop Width Standards Most homes are fitted with kitchen countertops that measure 25.5 inches in width (from the wall to the edge of the counter), with some measuring up to 28 inches. Standard measurements allow for a 1.5-inch overhang over 24-inch deep base cabinets.
