Table of Contents
Ceramic disc cartridges are simply two ceramic discs with holes through them. One disc is fixed in place whilst the other moves with the tap handle. When both discs are in alignment, the water is allowed to flow through the tap. When they are no longer aligned, the water stops.
How does a ceramic water valve work?
Ceramic Disc Faucet Two ceramic discs regulate the flow of water: a movable upper disc turns or lifts and lowers against a fixed lower ceramic disc. Ceramic valves are more durable over the long run in a broader variety of water conditions than any other variety of valve on the market.
Are ceramic tap valves better?
Plumbing connections for ceramic disc are no different to other taps, and with that comes all the ease of a quarter-turn technology, and a more durable, longer lasting tap without those annoying leaks. From a long-term maintenance point of view, ceramic disc taps are much better than normal taps.
Can ceramic tap valves be repaired?
How to repair a ceramic tap, with advice on tap valve fitting, ceramic tap washer repair and ceramic tap cartridge replacement. It is very rare for the ceramic discs to wear out and the need to replace them is even rarer. It is, most often, just a case of dismantling the moving parts and servicing them.
Is there a difference between hot and cold ceramic tap valves?
The Hot and Cold valves are the same, but open in different directions, so please select the valve you need according to how your taps work. If you have a two lever tap, the hot side has a valve and the cold side has a diverter.
What are ceramic valves?
A ceramic valve is a valve with ceramic trim, ball, seat, disc or lining. Thanks to the excellent corrosion resistance, abrasive resistance and wear resistance, ceramic valves are often used in severe corrosive and abrasive applications, such as FGD, and pneumatic refuse conveying systems.
How long do ceramic tap valves last?
How Long Do Ceramic Disc Cartridges Last? A lifetime. But it depends on the hardness of your water (contact your water provider), and the quality of the tap itself. A cheap tap, even with ceramic discs, is going to wear down over time.
Do ceramic taps wear out?
Occasionally, they do wear out, causing dripping and leaking. The reason for this is hard water which is full of minerals, harmful for all household appliances that use it. When the ceramics wear out, the whole cartridge has to be replaced, not only the discs.
Are ceramic tap spindles better?
The reason many opt for ceramic disc spindles is because: They are more durable and longer wearing, saving the inconvenience and expense at having to replace washers. Less wear and tear on the tap as there is no constant turning to get a good flow of water.
Why do ceramic disc taps leak?
Ceramic disc taps feature a cartridge within the tap that contain a pair of ceramic discs. If you do experience dripping this is usually caused by a scratched ceramic disc. In order to rectify the leak you must replace the entire cartridge as follows.
Are hot and cold taps the same?
So, when hot water was introduced, the logical conclusion about where to put this new tap was simply on the opposite side of the cold water tap – the left! So, the common sense answer is that the hot tap is on the left because people are mostly right handed and the cold tap is used the most often.
Is there a difference between hot and cold tap spindle?
The easy way to identify if you have spindle type tapware or not, is to see if there is one handle for cold water and one handle for hot water. There are only two types of spindle tapware. You have one which has tap washers and the other which has a ceramic disc (known as quarter turn taps).
Are all tap valves the same?
In the UK 95% of taps are either BSP 1/2″ (Basin size) or 3/4″ (Bath size). The BSP “British Pipe Standard ” doesn’t refer to any physical dimension, which is very confusing and is why we display all the dimensions in mm.
How do I stop my lever tap from dripping?
How to Fix a Dripping Tap Cut off the water supply. To avoid any further mess, cut off the water supply coming from the mainline. Remove the knobs. Use a flat-head screwdriver to remove the decorative parts from the knobs. Remove the stem. Check out for any damages. Re-assemble all the parts and test.
What is the difference between magnetic and ceramic cartridges?
A ceramic cartridge also has a higher-level, louder electrical output, so you can feed it directly into a music system without needing any further electronic manipulation. A moving-magnet cartridge has a much softer, lower-level output so you need to amplify its signal first before it goes into the rest of the system.
Do Moen faucets have ceramic valves?
Moen’s innovative yet simple standard cartridges have been used in one- and two-handle faucets. Today, we also offer our line of dependable Duralast® cartridges, which feature a ceramic disc, for use in many of our newer faucets.
What is a ceramic cartridge in a faucet?
Ceramic disk faucets are the latest development in modern faucet technology. The disk faucet mixes hot and cold water inside a mixing chamber called a pressure balance cartridge. Two ceramic disks at the bottom of the chamber will raise and lower to control the volume of water flow.
How long should a tap valve last?
Given the ever-improving quality of taps, modern tap designs can be expected to last between 15 and 20 years typically.
How long should a kitchen mixer tap last?
Mixer taps generally last for 5-10 years and they only have a 1 year warranty. So if the tap is over 1 year old, expect to replace it for a new one.
