Table of Contents
When you are ready to resume use of the washer, you must first unlock the control panel. Locate the “Control Lock/Unlock” button on your Duet’s control panel. Press and hold the “Control Lock/Unlock” button for three seconds. Release the “Control Lock/Unlock” button when the control lock icon on the display disappears.
How do you unlock the control lock on a washing machine?
To lock or unlock the washer controls: Press and hold the LOCK button for 3 seconds. A sound is made to indicate the lock/unlock status. The control lock icon on the display will light up when the feature is on.
How do I get the control lock off my Whirlpool dryer?
Press and hold the Control Lock Key for 3 seconds to unlock the machine. You will notice the machine count down from 3-2-1. The control lock may be a stand alone key, or it could be a dual function key paired with another button like Extra Rinse, Steam, etc.
How do you unlock a front load washer?
Opening a Manual Lock. Turn the washing machine off and unplug it. If you’re in the middle of a cycle, turn the dial or press the button to pause or end the cycle. Wait 5-6 seconds to see if the door unlocks.
Where is the control lock button on my Whirlpool washer?
How to Unlock the Controls for a Whirlpool Duet Washer Locate the “Control Lock/Unlock” button on your Duet’s control panel. Press and hold the “Control Lock/Unlock” button for three seconds. Release the “Control Lock/Unlock” button when the control lock icon on the display disappears.
How do you manually unlock a GE washing machine?
The latch has a manual release ring that allows you to manually unlock the door from the bottom. Simply remove the bottom panel and reach up and pull the manual release ring at the bottom of the door latch. If the door on your GE front load washer will not lock there could be a couple of problems.
How do I reset the lid lock on my GE washer?
Top Load Washer – Lid Lock Feature Make sure the washer is paused (press the Start/Pause button). During the spin cycle, this can take up to 3 minutes for the basket to stop spinning and allow you to open the lid. Unplug the washer for a minute to reset.
How dO I turn off child lock?
You can activate the CHILD LOCK function by pressing the STOP button for more than 5 seconds. The key symbol will light up in the front panel display. To cancel, press the STOP button for more than 5 seconds so that the key symbol disappears from the front panel display.
How do I turn off the Control Lock on my dryer?
The control lock is turned on or off by pushing and holding the drain/spin button for 3-5 seconds. See the image below. If the control lock light does not toggle on and off has your pressing and holding the button then it is possible the inter face is defective. This will unlock the control.
How do I turn off the Control Lock on my Whirlpool microwave?
To Turn the Control Lock Feature On or Off: Make sure the microwave oven and timer are off. Press and hold the CANCEL keypad for 3 seconds. Two (2) tones will sound and “LOC” or a padlock icon will be displayed (indicating the control is LOCKED). Repeat to unlock. Again, two (2) tones will sound.
Why is my washer stuck on lid lock?
– Lock striker that presses down on the lid switch may be out of alignment. – A piece of lint or washing machine detergent has built up over time and hinders the locking of the lid. – The control board sees an open lid switch when it attempts to lock.
Why won’t the washing machine door open?
The most common cause is water left in machine. Try running a spin/drain cycle. If this fails, the machine can be drained by placing the washing machine drain hose lower than the drum (into a bucket or tray). The door interlock has simply jammed.
How do I turn off the control lock on my Whirlpool front load washer?
To turn off Control Lock, press and hold the Options key that says “Control Lock Hold 3 Sec” under it for 3 seconds.
What do I do when my Whirlpool washer Says control locked?
If you do not see the 3-2-1 countdown and are unable to de-activate Control Lock, try pressing the POWER button first, then touch and hold 3 seconds to de-activate control lock. If this does not work, try unplugging the machine or turning off the breaker for 1 minute, then power the machine back on and try again.
How do I reset the control panel on my Whirlpool washer?
The first way you can reset whirlpool washer top load is by unplugging it for about 2 minutes then plug it back in and wait about 30 seconds before starting the washer again. This performs a hard reset on the machine and it will start over after you reconnect it again.
How do I turn off the control lock on my Kenmore washer?
My kenmore elite washer has the control locked light on. How do I remove it? The control panel being locked on the washer can be very concerning. The model number is 45981 400. Thank you for submitting your question. Press and hold the “CHIME” button for 3 or more seconds to activate/deactivate the CL function.
How do I unlock my GE washer door?
If the washer is running, press the START/PAUSE button once it will pause the washer and unlock the door. It will take a few seconds for the door to unlock after pressing PAUSE. Press again to restart the wash cycle. In some cycles the washer will drain first, and then unlock the door when it is paused.
How do I troubleshoot my GE washer?
How to Troubleshoot a GE Top Load Washer Check the amount of detergent you have put in the washer. Examine the GE top load washer’s drain hose for leaks. Check the water connections to your GE top load washer. Check whether the GE top load washer lid is closing firmly. Check the load in your GE top loading washer.
