Table of Contents
Exact model numbers can be found on your box or on your instruction sheet. If unavailable, you may find the general family series number on the back of the spout (non pullout).
Where do I find my faucet model number?
On the packaging, look near the UPC code or the top of the box. On the faucet, a model identification tag has been attached to most models manufactured since 2012. Look for the tag on one of the faucet’s supply lines.
Are Moen replacement parts free?
Moen Incorporated Moen warrants to the original consumer purchaser and parts of this product to be free from defects in material and workmanship during normal use, for (5) years from date of purchase. A replacement for any defective part will be supplied free of charge for installation by you.
How do I find the model number of my Moen kitchen faucet?
The model/series number is usually a four or five digit number and can be followed by letters. On the underside of the spout, the series number may be found. There is a decorative ring at the bottom of the spout that has a series number on it.
How do I find the model number of my kitchen faucet?
Identifying Your Faucet Model The model number is printed on a tag that is attached to the cold water supply line of the faucet. The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet. The model number, or part number, is typically preceded by “P/N.”.
What is the difference between a Moen 1222 and 1222B?
There is absolutely NO difference between the Moen 1222 vs 1222B replacement cartridges. They are both the replacement part cartridge for the Posi Temp Moen shower valve. They are made from the same parts, the only difference is their packaging and model number. The “B” in the 1222B model number stands for Bulk.
How long does a Moen cartridge last?
The system has expensive cartridges, they cost about $30 (2014) to replace, but they last a long time — 20 to 30 years. It’s not a bad deal, and unlike modern ceramic faucets, Moen still makes the same part to put into valve bodies made 40 years ago!.
How do I contact Moen free replacement parts?
Replacement parts may be obtained by calling 1-800-289-6636 (Canada 1-800-465-6130), or by writing to Moen Incorporated, 25300 Al Moen Drive, North OImsted, OH 44070-8022.
How do I identify my faucet manufacturer?
The most obvious and quickest solution is to look for a logo — the manufacturer’s symbol — that identifies its faucets. Each manufacturer has a distinctive logo that sometimes appears on the escutcheon — the plate beneath the faucet — the body of the faucet, the spout itself or somewhere on the handle.
How do I identify my Moen shower valve?
Look closely at the handle buttons that were attached to the shower valve. Typically, “Moen” will be written in the middle of the “Hot” and “Cold” buttons. If you do not see this, the handle buttons have been replaced, or the “Hot/Cold” button is a lever (wall escutcheon).
How do I know what kind of bathroom faucet I have?
Three types of bathroom faucets are likely to have a single handle: the ball, disc and single handle cartridge types. You can tell if you have a ball type if the handle rotates, wiggles and coasts in any direction like a joystick on what looks like a ball set into the top of the faucet.
How do I know if I have a Moen 1222 or 1225?
To tell if you need a 1222 or 1225 Moen cartridge, check how your faucet turns on the water. If you need to pull out the handle you need the Moen 1225 cartridge while if you only need to rotate it to adjust the water temperature you need the Moen 1222 cartridge.
How do I know if I have a Moen Posi Temp valve?
Models that have a lever or knob that rotate only are called Posi-Temp. This “cycling valve” handle is pointed towards the 6:00 position when off, rotates to the 3:00 position for cold, 12:00 for warm and 9:00 for full hot. If this is the way your Moen valve operates, any Posi-Temp trim will fit.
Can I use Moen 1225 instead of 1222?
Are The Moen 1222 & 1225 Cartridges Interchangeable? NO! While the Moen 1200 and the Moen 1225 cartridges are interchangeable, the Moen 1222 Posi Temp cartridge is absolutely not interchangeable with the Moen 1225 or 1200.
How long should a Moen faucet last?
The system has expensive cartridges, they cost about $30 (2014) to replace, but they last a long time — 20 to 30 years. It’s not a bad deal, and unlike modern ceramic faucets, Moen still makes the same part to put into valve bodies made 40 years ago!Jan 8, 2014.
How long do Moen 1222 cartridges last?
These go bad every 3-5 years, and it’s a ridiculously expensive price for such a simple item.
What is the 1 800 number for Moen?
1-800-BUY-MOEN.
What is the Moen logo?
The Moen logo has been specially created for our brand. It features the waterdrop symbol, the Moen wordmark and our long-established tagline. The full-color logo is always preferred and should be used whenever possible.
Where is Moen headquarters?
How do you remove a Moen single handle kitchen faucet?
Some Moen faucets have handles that remove by loosening the screw in the back of the handle. To loosen this screw use a 3/32″ hex wrench. After the handle has been removed unscrew the spout collar nut by turning counterclockwise then lift and rotate the spout.
What is the difference between Moen 1200 and 1225 cartridge?
Moen 1200 has an all-round brass design which ensures longevity in the long run. But in terms of performance, Moen 1225 can offer you better performance with its 1GPM water discharge rate. While Moen 1200 does not support Posi-Temp shower valves, Moen 1225 is compatible with almost any faucet.
What is the difference between Moen cartridge 1224 and 1224b?
Answer: The 1224 is packaged in retail packaging sold at retail stores. The 1224b is not in pretty retail packaging but just the cartridge only in a bag. All double handle faucets from Moen use the same cartridge.
