Table of Contents
Door is locked when starting or using the oven Turn the power off at the circuit breaker or fuse box for one minute, then turn the power back on. Allow the oven to cool, approximately 30-90 minutes, move the latch arm to the left to unlock the door.
How do I turn off the control lock on my Whirlpool stove?
To turn the control lock setting off, press and hold the START button for 3 seconds. If this doesn’t work, turn the oven off at the circuit breaker for 1 minute. When the circuit breaker is turned back on, the error code should be gone.
How do I get my stove lock off?
Unplug the oven for 5 minutes, plug it back in, and press “Clear/Off”. This can sometimes prompt the oven’s computer to reset and release the lock button. It’s fairly common for the lock function to get stuck if the self-cleaning cycle was interrupted for any reason, like a power outage.
What does control lock mean on a Whirlpool stove?
The lock feature shuts down the control pads (buttons) and locks the oven door to avoid unintended use of the oven. The lock feature is preset unlocked, but can be locked. If the oven is currently in use, the controls and oven door cannot be locked.
How do I get the Control Lock off my washing machine?
When you are ready to resume use of the washer, you must first unlock the control panel. Locate the “Control Lock/Unlock” button on your Duet’s control panel. Press and hold the “Control Lock/Unlock” button for three seconds. Release the “Control Lock/Unlock” button when the control lock icon on the display disappears.
How do you reset a Whirlpool stove?
Reset power to the product: Power unit down by turning off the circuit breaker(s) for one (1) minute. Power unit up by turning on the circuit breaker(s). Start a bake cycle. Monitor the oven for one (1) minute to ensure the error code does not display again. Verify oven operation.
Why does my oven says door locked?
You can diagnose the failure simply by disconnecting the wires from the micro-switch and then see if the oven will operate in bake or broil. If it does, replace the latch assembly. If it continues to display “unlock door”, the electronic oven control will need to be replaced.
Why has my electric oven stopped working?
Power Source If only one leg is voltage is shut down by a tripped breaker or a blown fuse, the oven will not power up. If a breaker is tripped or a fuse is blown, reset the breaker or replace the fuse and try turning on the oven once again. If the oven powers up, you have found your problem.
How do you unlock a Gorenje stove?
Simultaneously press the (C) sensor for the rear left cooking zone and the »–« sensor (E) and hold them for approximately 3 seconds. After the beep, »L« will appear for a few seconds on all displays. The child lock is now activated.
What is control lockout on an electric range?
The Gas/Control Lockout feature disables the cooktop, locking out the control so that pressing the pads does not activate the controls. Gas flow is stopped to both the cooktop and the oven.
How do I unlock my hob?
If your hob doesn’t have a key or a p button, press the L symbol for approximately 3 seconds to deactivate the childproof lock. It could be that you’ve activated the cleaning lock. This will automatically deactivate after 35 seconds. The hand symbol will be illuminated if this has been activated.
Where is the lock on a Whirlpool oven?
A padlock symbol will be displayed in the corner of the Whirlpool oven’s front display panel if it is locked. The oven will not unlock itself on its own even if it is disconnected from its power source. To disable, touch the screen to display the control screen message, and then swipe up.
Why does my washer say control locked?
The Control Lock feature on Front Load Washers can prevent any selections from being made when activated. The controls can be locked or unlocked after a cycle has started. Children cannot accidentally start the washer by touching pads with this option selected.
What do I do if my Whirlpool washer is locked?
If manually resetting your washer didn’t work, you should unplug the washer for 45 minutes or longer and then plug it back in. The washer’s programing should completely reset. You can now see if the door has unlocked. If your washer door is still locked, the last option is to manually unlock it.
What do I do when my Whirlpool washer Says control locked?
Select and hold END OF CYCLE SIGNAL for 3 seconds. The CONTROL LOCKED status light glows. Select and hold END OF CYCLE SIGNAL for 3 seconds until the CONTROL LOCKED Status light turns off. I hope this is helpful.
How do you reset an electric stove?
Reset the electronic control. Turn the circuit breaker to the OFF position or remove the fuse. Wait one minute, then turn the circuit breaker back to the ON position or install the fuse to reset power to the unit. This should reset the electronic controls on the range or wall oven.
Why did my Whirlpool oven stop working?
An electric oven not heating up can often be attributed to a defective bake element. This Whirlpool oven heating element is a metal coil located at the bottom of electric ovens. When you turn on the oven, wires inside the coil receive electrical current that heats the metal, providing the heat you need to cook food.
How long does it take for an oven to unlock after self cleaning?
In most modern ovens, the oven door automatically locks and the temperature rises to between 800 and 1,000 degrees Fahrenheit to incinerate any food remains, in a cycle lasting between two to six hours. Once the cycle is complete and the oven has cooled completely, the door automatically unlocks.
How do I unlock the controls on my GE oven?
To activate: Press the Lock Controls pad for three seconds to lock or unlock the control. Cancel/Off is always active, even when the control is locked.
