Directions: Shake dispenser. Remove cap and insert nozzle tip into key slot or apply to desired surface. Squeeze gently near center of tube to dispense. Use Graphite Lubricant regularly, as preventative maintenance, to keep all locks lubricated and working smoothly.
Where do you apply graphite grease?
Penrite Graphite Grease can be used in plain bearing locks, latches and fasteners, cables and springs and even as a fifth wheel lubricant. NOTE: Should not be used in wheel bearings or where temperatures are likely to exceed 60°C.
What is graphite lubricant good for?
It creates a quick drying film that provides long-lasting lubrication. It’s recommended as a general maintenance lubricant on gaskets, transfer belts and conveyor belts. Also for use for high temperature, low load, locks, rollers, wheels, gears, chains and hoists.
Can graphite lubricant get wet?
Graphite is also suitable for use in extreme temperatures: hot and cold. Oils and greases get sticky or too viscous in temperature extremes. Graphite will also work when it gets wet. In fact, sometimes graphite is mixed with water, or other liquids, to allow the graphite to flow into all parts of a mechanism.
Is graphite a good gun lubricant?
Weapons grade, natural, powdered graphite provides superior lubrication without collecting airborne contaminants. Dry formula will not trap dirt, run off, gum up, or lose its lubricating qualities when subjected to extreme temperatures. A favorite lube for heavy automatic weapons, especially in desert conditions.
Why is graphite a better lubricant than oil?
The greatest benefit to using graphite (rather than oil) is that the graphite leaves no sticky residue that may later attract dust. This is because the lubricating properties of graphite lie in its weak covalent bonds that allow the layers of graphite to “slide” on top of one another with very little resistance.
Should I use graphite or wd40 in my locks?
WD-40 is a lubricant used for many household items as well as car parts. It is designed for light-duty lubrication or to unstick areas. Use it for light lubrication. Graphite lubricant is the choice for locks because it doesn’t attract dust and dirt, which can damage the locking mechanism.
Why is graphite used as a dry lubricant?
Graphite is used as a lubricant due to its slippery nature. Due to its loosely intact carbon atoms or free electrons, they can move around easily from one place to another, making graphite a good conductor of electricity.
What are three uses of graphite?
Graphite is used in pencils and lubricants. It is a good conductor of heat and electricity. Its high conductivity makes it useful in electronic products such as electrodes, batteries, and solar panels.
Is it OK to put WD40 in a lock?
This is what we find works best to keep your lock in its best working condition lubricate the lock cylinder. Do not use WD-40, WD-40 is a solvent, not a lubricant and will, in fact, remove any type of lubricant that is in the cylinder.
Why is graphite a good lubricant for locks?
Graphite is a common and stable form of the element carbon, and it has excellent properties as a dry lock lubricant. It can last a long time, and it does not attract dirt. If someone shoots a liquid lubricant into the lock, that has existing graphite in it, the graphite will work against it and gunk up the lock parts.
Should you oil a lock?
Locks typically last for around seven years. To maximize the lifespan of your lock, you should perform regular cleaning and lubrication. You can use compressed air to clean locks, as well as wet cleaners like WD-40. Dry lubes are great for locks because they require less follow up lubrication.
Does graphite lubricant prevent rust?
GRAPHITE LUBRICANT is a spray Graphite Lubricant designed to work in both high and low temperature applications. GRAPHITE LUBRICANT is non-melting, will not wash out, prevents rust and corrosion, lubricates and penetrates and reduces heat and friction.
Is graphite better than wd40?
A: Although WD-40 is magic stuff, it is not the best choice to lubricate automotive door locks and linkages. Although it does a good job of cleaning and temporary lubricating, it goes away, so it makes a good first step. Graphite has long been a popular lube choice, but we like to use bike chain lube.
What is a good dry lubricant?
The four most commonly used solid lubricants are: Graphite. Used in air compressors, food industry, railway track joints, brass instrument valves, piano actions, open gear, ball bearings, machine-shop works, etc. Molybdenum disulfide (MoS 2 ). Hexagonal boron nitride. Tungsten disulfide.
Should you oil the inside of a gun barrel?
Do not lubricate the bore using gun oil! For long term storage only, the bore can be treated with a heavier lubricant such as Barricade (or equivalent). This must be removed by cleaning the barrel prior to shooting the firearm!Oct 18, 2019.
Is WD40 good for gun cleaning?
Since WD-40 is primarily a solvent it seems to make sense that it would be ideal for cleaning guns. However, cleaning your guns with WD40 is NOT advisable. Using an aerosol solvent simply “shoots” all the gunk into tiny crevices in your firearm, making them even harder to clean and can lead to “gumming” up.
Is gun oil the same as gun lube?
The main difference between them is their viscosity. Gun oils/lubricants tend to be less viscous, while grease has a generally more gooey and gelatinous texture. The upside of grease is its resistance to extreme conditions; but nowadays, most people stick with gun oils for their average needs.
Why graphite can be used as a lubricant but Diamond Cannot?
Because of its softness and non-volatile nature, graphite is used as a lubricant in the fast moving parts of a machinery. Diamond, on the other hand, is an extremely hard substance; therefore, it cannot be used as a lubricant.
What should you not use WD-40 on?
But Don’t Spray It On: Door hinges. Sure, WD-40 will stop the squeaking, but it also attracts dust and dirt. Bike chains. WD-40 can cause dirt and dust to stick to a chain. Paintball guns. WD-40 can melt the seals in the guns. Locks. iPods and iPads.
Is White Lithium Grease good for locks?
White lithium grease is good for metal-to- metal joints like hinge and latch mechanisms, which need a clinging grease to repel water and hold up under harsh conditions. Graphite lubricant is the right choice for locks—it won’t attract dirt to fine lock mechanisms like an oil would.