QA

Question: How Do You Finish A Wall Over A Shower Surround

What do you do with the wall above the shower surround?

What to Do With the Wall Above the Shower Surround? Tile It Up. Add a few rows of decorative tile above the surround to extend it all the way to the ceiling. Waterproof Art. Touch of Paint. Simple Shelves. Raise a Panel.

What kind of drywall goes over shower surround?

Regular drywall will work fine on a tub surround as long as it’s installed properly and painted with proper paint. Don’t let the drywall sit right on the lip of the surround, as it will eventually start “wicking” water and cause issues. Leave a 1/4″ gap, prefill with setting compound, flat tape, and finish.

How do you waterproof drywall above a shower?

Prime the drywall with oil- or shellac-based primer. These coatings protect against moisture better than water-based primer, but they are noxious, so wear a respirator while using them. Spread the primer with a paintbrush or roller and let it dry before painting.

Do you put drywall behind a shower surround?

Fiberglass and acrylic tub and shower enclosures come with a flanged edge that attaches directly to the wall studs, and the proper way to hide this flange is to install drywall over it. Consequently, enclosures are typically installed on the bare studs.

How do you tile over a shower surround?

How to Attach Tile to Drywall Above a Shower Surround Step 1: Create a Template. Step 2: Lay Out Your Tile Pattern. Step 3: Cut Edge Tiles. Step 4: Create Chalk Lines. Step 5: Apply Tile Glue. Step 6: Attach the Tiles. Step 7: Make Additional Chalk Lines. Step 8: Finish Attaching Tiles.

Can you tile above a shower insert?

Just as you can use tile inside the shower itself, you can finish the wall above it with ceramic tile. Using subway tile above shower inserts adds a different look than traditional tile because of its smaller size.

Can you use peel and stick tile above a shower?

H Peel and Stick Self-Adhesive Decorative Mosaic Wall Tile Backsplash (6-Pack)-SM1036-6 – The Home Depot. Especially designed for backsplash in kitchen and bathroom environments, the tiles are resistant to the heat of stovetops and the humidity of bathrooms (do not use in shower).

Will peel and stick tile work in a bathroom?

Peel and stick Smart Tiles are perfect for the kitchen or bathroom because they are heat and humidity resistant.

Do you need green board behind shower surround?

Special protection is needed behind showers and tubs to prevent moisture from seeping into the wall structure. Non-paper-faced fiber-reinforced gypsum board, moisture-resistant gypsum board, or “green board” products are also not recommended behind tub surrounds (BSC 2009a).

What is the best backer board for a shower?

Cement board is a good, reliable backer board that works well on both floors and walls. Keep in mind that most tile setters err on the side of caution and brush a waterproofing membrane on top of cement board when it is in wet areas like showers or tub surrounds.

Is there a waterproof paint for shower walls?

The simplest choice for shower walls is to paint them with a waterproof, bathroom safe paint of your choice. Most paints that are fit for use in bathrooms are at least semi-gloss, and the glossier the paint is, the more water resistant and the easier to clean it will be.

Can drywall be waterproofed?

Drywall can be primed and painted to be waterproof. Although water resistant drywall — commonly referred to as greenboard or blueboard because of its color — is available at most home improvement stores, you may find yourself needing to waterproof your current drywall.

Can you use moisture resistant drywall in shower?

It means “Greenboard” can still be used in bathrooms (and other areas), it just cannot be used as a backer for tile in a shower or tub surround. It can be used in areas not subject to direct water exposure (tub/shower surround), and areas of noncontinuous high humidity (bathrooms).

What do you put around the top of a shower?

Installing Cement Backerboard for Tile in a Shower Installing cement backerboard is one of the more popular choices for a shower wall substrate. Cement backerboards include Hardiebacker, Durock, Fiberboard, wonderboard, and similar products.

Should you put plastic behind shower walls?

They are required beneath your shower pan and behind your shower walls. Moisture barriers can be made of polyethylene or a membrane that is rolled directly onto the drywall. No matter what they are made of, without them, your shower is subject to moisture damage.

Do I need a vapor barrier behind cement board in shower?

Vapor barriers need to be installed behind cement boards in shower walls to prevent water vapor from reaching the wall cavity and the studs. Some showers produce water vapors in the form of steam which surface applied waterproofing alone would not be enough as protection.

What material is used behind shower walls?

In showers, the standard substrate is tile backer, also called cement board or cement backer board.

What do you put above a fiberglass shower?

The Best Way to Update Your Fibreglass Shower Surround tile added above the shower tile on the exposed walls.

Should you tile ceiling above shower?

Tiling the bathroom ceiling can help protect the walls from moisture. If you’re not worried about the humidity, it is also a great way to add some extra color as an accent wall. Tiling the ceiling of your shower can update your bathroom and add an extra flair to it.

How can I cover my shower walls?

Here are a few ideas: Paint them with waterproof paint, such as epoxy. Cover them with a shower curtain liner. Install a shower liner or surround kit. Apply wall stickers that can be used in a high-humidity environment. Attach beadboard panels painted with waterproof paint.

Do tile stickers work in shower?

If installed correctly, bathroom tile stickers should stand up to all of the heat and moisture that a bathroom throws your way.

Are peel and stick tiles waterproof?

This stick tile waterproof and oil-proof, easy to remain, and clean. Easy to install: stick on the tile for kitchen, bathroom, or anywhere you want, easy self-adhesive, steady sticky, it can be applied to a round corner, no grout, no glue, just peel and stick without special tools, no mess. 3d excellent effect.

Can you use tic tac tiles in shower?

We do not recommend using our tiles in the shower. The surface of our tiles is waterproof, but overlapping parts can be weakened in places like showers where they will be constantly exposed to water. Please make sure that your walls are completely dry, and carefully overlap edges when you install the tiles.

How long will peel and stick tile last?

How long peel and stick flooring lasts. To answer the question bluntly, on average you can expect peel and stick floors to last between five and 25 years. However, their life span ultimately comes down to how well they’re installed, how much traffic they receive, and whether they’re repeatedly exposed to water.

How long does it take for peel and stick tile to set?

If the tiles and/or adhesive you’ve bought don’t give a clear time frame, then waiting 72 hours is always a good idea. The waiting period recommended by the manufacturer of your tiles/adhesive will likely assume you’ve done a few other things right while installing your vinyl tiling.