QA

How Do You Make Sgraffito Pottery

Making sgraffito pottery involves scratching through a top decorative layer to expose the underlying clay body. The decorative layer can be underglaze, slip, or engobe. Often the underglaze, slip, or engobe is applied to leather hard clay before being incised.

What glaze do you use for sgraffito?

Typically a clear or semi-transparent glaze is used over a carved sgraffito design to allow the contrast to to show. Here’s how to do it: After your piece has reached leatherhard, and you have finished trimming it, paint a coat of slip onto the pot while it is centered and turning on the wheel.

What is the sgraffito technique in ceramics?

Sgraffito, (Italian: “scratched”), in the visual arts, a technique used in painting, pottery, and glass, which consists of putting down a preliminary surface, covering it with another, and then scratching the superficial layer in such a way that the pattern or shape that emerges is of the lower colour.

Can you wash off underglaze?

I mix my underglaze with a little water to make it the consistency of milk. When you’re finished painting a light, even coat, remove the unwanted underglaze with a damp studio sponge (5), making sure to rinse the sponge often. Doing this keeps the undesired colorant off the surface of your pot.

What does Overglaze compatible mean?

In the case of overglaze, you burn the glazing on the porcelain and then paint it. While when using underglaze the paint is applied on the unglazed porcelain and then the glaze is applied over the paint.

What tool do you use on sgraffito?

Ribbon-loop tools incise through the layers using wire loops; styluses have thin wire loops that cut more precisely than ribbon loops; others are needles that scratch precise lines. Spatulas and scoopers create nuanced marks and help shape wet forms.

Can you put underglaze on Bisqueware?

Underglaze on Bisqueware Many commercial underglazes are made to work on greenware and bisqueware. This means underglazes are super versatile and can potentially save you time if you are running a tight firing schedule. Using underglaze on bisque-fired clay has 5 advantages. The vessel is less fragile.

Can you use Engobe on Bisqueware?

They are applied easily by brush or spray. Whereas the simple liquefied slip commonly is used to coat greenware, an engobe can be formulated for use at any stage, including over bisque-fired ware.

What is Terra Sigillata in pottery?

Terra sigillata is a very smooth, lustrous coating of clay which resembles a glaze and is virtually waterproof. The name means “sealed earth” and has been used to refer to the Classical Greek Attic black-figure and red-figure painted pottery.

Is there a rule about color when creating sgraffito?

The sgraffito technique involves scratching off a top layer to reveal a bottom layer, so you’ll need to add at least two different colors. Even if you’d like the bottom layer to be the natural color of the clay, a clear underglaze should be used so that the ceramic fires evenly.

What is slip in pottery?

A slip is a clay slurry used to produce pottery and other ceramic wares. On one definition engobe, as compared to slip, has somewhat lower clay content, higher proportion of flux, and added filler, and in some cases a colorant.

What is Mishima technique?

Mishima is a technique of inlaying slip, underglaze, or even clay into a contrasting clay body, the main clay body of the pottery piece. This technique allows for extremely fine, intricate design work with hard, sharp edges that can be difficult to reliably replicate in any other way.

What’s the difference between sgraffito and Mishima?

What is Mishima? Mishima is the opposite sgraffito: a design is scratched into the leather-hard piece and then the lines are filled with color. Additional color is added to finish the design. The piece is then fired to about 1800 degrees, glazed with a clear glaze, and fired again.

Can you sgraffito on bone dry clay?

If I’ve read correctly, you can use sgraffito on leather hard or bone dry greenware as well as bisqued pieces.

What is underglaze in pottery?

Underglazes are decorative colours applied to ware before the application of glaze, or they can be put over glaze (prior to firing), they can also be considered as a “paint for clay”.

Can you carve into bone dry clay?

Carving should be done on clay that is leather hard. If the clay is too wet the it will have too little resistance and the crumbs will stick. If the clay is too dry it will chip when carved. When done, let the piece dry before removing crumbs with a sponge or rib.

Can I sgraffito on Bisqueware?

Making sgraffito pottery involves scratching through a top decorative layer to expose the underlying clay body. The decorative layer can be underglaze, slip, or engobe. However, the sgraffito technique can be used on bisqueware too.

What is Scumbling technique?

Scumbling is the brushing on of an opaque, lighter layer of paint. This technique is used to visually soften or lighten areas. Scumbling, like glazing, must be done over a dry paint layer, and you typically apply the paint unthinned, using a dry-brush technique.

What is the difference between glaze and underglaze?

A glaze consists of ground-up materials suspended in water, which is applied to the piece. When it is fired, the ingredients melt together to from glass. The clay body and the underglaze contain glass-forming ingredients. However, when the glaze is fired, all the particles in the glaze melt to form glass.

Can you carve dried clay?

Though clay is usually modeled, it is an excellent material to use when learning to carve. It’s not hard in the same way stone and wood are hard. Dry clay chips and scrapes away quite easily. One does not need specially designed tools to carve clay nor does it require a great amount of effort.

How do you make colored slip for sgraffito?

To make colored slip, you mix a powdered oxide or stain with clay slip. The amount of stain added is normally between 5 and 10% of the weight of the clay in the slip. The best percentage depends on the color of the stain. And how deep you want the color of the slip to be.