QA

Quick Answer: How Do You Replace A Garage Door Spring

Can I replace garage door spring myself?

So faced with a broken garage door spring, the question is, can you fix it yourself? You absolutely can replace a garage door spring, but the type of springs you have may influence your decision. If you’re uncomfortable with any part of the process, simply leave the job to a garage door professional.

How much does it cost to replace the big spring on a garage door?

How Much Does It Cost to Replace Garage-Door Springs? To replace garage-door springs yourself, you will spend $30 to $100 on parts. Or, if you’d prefer professional installation, expect to pay between $200 and $300.

How much does it cost to replace a garage door opener spring?

Garage Door Spring Replacement Cost. Replacing garage door springs costs $150 to $350 on average. The springs alone typically run $30 to $75 each but you may find them as low as $15 a piece and up to $100 each. Commercial grade springs can run $300 or more.

How long does it take to replace a garage spring?

Replacing garage door springs takes 30 minutes to 1 hour, depending on the type and size of the garage door and number of springs. Old garage doors with several failing parts take up to two hours to replace. A garage door spring tune-up takes 10 to 15 minutes per door.

Is it hard to replace a garage door spring?

How to Replace Extension Springs. Extension springs are generally considered much easier to replace. You can completely remove and replace the springs on your door without dealing with any amount of dangerous tension. Once you open the door, the springs will lose most of their tension and should be safe to work with.

Can I open my garage door with a broken spring?

As professionals in the industry, we advise you do not attempt to open your garage door if the spring is broken. Extension springs on either side of the door, along the rails, help counterbalance the weight of the door as it is raised or lowered. Torsion springs across the top of the door help do the heavy lifting.

Should you replace both garage door springs at the same time?

When replacing tension springs, it is recommended that both springs be replaced and matched because the older, unbroken spring will have lost some of its tension from years of use. Replacing both springs helps to balance the door so that it opens smoothly with equal force being applied to each side of the door.

Which is better torsion or extension springs?

Torsion springs tend to be stronger and more durable than extension springs. And though they are more expensive, they last longer, between 15,000 and 20,000 cycles as opposed to 10,000 cycles with extension springs. They also offer greater balance and show more control when moving, not jerking as the door moves.

How many springs should a garage door have?

As a rule of thumb, a single garage door takes one torsion spring. A double-wide garage door takes two springs. However, if you have an exceptionally heavy single door, you may need two torsion springs. It is easy to tell whether you have one or two springs.

How long does garage door spring last?

How long do garage springs last, typically? The average garage door spring, if correctly installed, should last about 10,000 cycles of opening and closing. If you only go in and out of your garage once a day, that means you should expect a broken garage door spring around 14 years after the spring is first installed.

How do I know if my garage door spring is broken?

7 Warning Signs of Broken Garage Door Springs Automatic Opener Won’t Fully Raise the Door. Door Closes Too Fast. Door Opens Crookedly. Loud Snapping Noise Comes From Garage. Operation Comes With Lots of Noise. Springs Have Gaps. Springs Look Rusty or Stretched Out.

Why do springs break on garage doors?

The springs on your garage door system are responsible for the heavy lifting. When the garage door is lowered, the springs gain tension. When raising the garage door, tension is released and the spring assists with the lifting. As a result, most garage door springs break when the door is down.

What is the color code on garage door springs?

Garage Door Extension Spring DASMA Color Code Chart Color Pounds Kilograms Brown 60/160/260 xxx Orange 70/170/270 30/75/120 Gold 80/180/280 35/80/125 Light Blue 90/190/290 40/85/130.

How do you close a garage door with a broken spring?

Lift the door until it is completely raised along the horizontal rails. If the door is too heavy, discontinue your attempt to lift the door and call a repair service immediately. Some companies, like ours, are able to provide same-day repair services. To close the door, carefully pull the door down slowly.

Why does my garage door have 2 different springs?

Doors with extension springs should always have two springs. The pair work together to provide a counterweight to the door. If one of your garage door springs breaks or is in poor condition, replace both springs. In order for the springs to provide a balanced lift, both must provide equal strength and support.

What type of garage door spring is best?

Torsion springs are sturdier and last longer. Torsion springs do cost more, but generally last between 15,000 and 20,000 cycles, whereas extension springs last up to 10,000 cycles. For example, if you open your garage door 4 times a day, extension springs will last about 7 years.

Which garage door spring is best?

The best type of garage door system is the torsion spring system. Torsion springs are not only safer than extension springs they also last longer.

Does a garage door need a spring?

In fact, to function without any problems, your garage door needs a system that will maintain balance and offset the weight of garage doors. This is achieved by installing adequate garage door springs.