Table of Contents
Old-Style Heatilator Fireplaces use a special venting system that draws in cool room air and releases it as warmer air. The air that is in the venting system never goes through the firebox so it doesn’t get fouled with ash, smoke, or other unpleasant odors.
Can you burn wood in a Heatilator fireplace?
An example is the Heatilator Constitution wood-burning fireplace. This attractive clean-burning unit can provide heat for up to 10 hours on just one full load of wood.
How does a Heatilator wood fireplace work?
Heatilator is a brand name (and the household name) for what can be more generically called a heat-circulating fireplace. Heatilator fireplaces work by circulating air around a firebox and back into the room, so that the warmth of the fire will be dispersed throughout the home.
How do you start a fire in a Heatilator fireplace?
If your fireplace does not have a gas starter, arrange kindling (small diameter sticks) in a crisscross pattern on top of crumpled newspaper under the grate before arranging the logs. Arrange logs in a safe way to ensure that logs don’t roll out during burning.
Are Heatilator fireplaces efficient?
Professional installation can be completed in as little as six hours, and can make your fireplace up to 85 percent more efficient.
How long does a heatilator last?
Under normal operating conditions the batteries should last 6 – 12 months. Each of the batteries used in the hand-held transmitters should be producing 1.5V to 1.6V to operate.
Does a Heatilator fireplace have a blower?
Our GFK4B – FK4 – GFK4 Replacement Blower Fan is designed for Heatilator and other fireplace inserts to circulate air around the firebox and enhance heat output.
How do you use fireplace vents?
Related Articles Prepare your fire in the fireplace by placing two dry, seasoned logs onto the grate. Open the fireplace vent at the top of the firebox. Close all your windows and doors. Light the paper under the grate, using a fireplace match. Let the flames die and the coals cool completely before closing the vent.
Does a Heatilator have a damper?
Yes! The damper is behind the heat exchange tubes, and is on the far side of the chimney, so I don’t even know how a person could get to it for removal :/.
Is heatilator a good brand?
Established in 1927, Heatilator has built a long standing reputation for providing quality, dependable hearth products at unbeatable values. Today, Heatilator remains the most preferred, recommended and installed fireplace brand among building professionals.
How do you clean a wood Heatilator fireplace?
Remove the front face the fireplace, carefully remove the glass assembly (follow instructions in owners’ manual), and lay it on a soft surface. Wipe down both sides of the glass with a soft cloth and a cleaner specified for fireplaces, like Stove Bright or Rutland White Off glass cleaners.
What is a Heatilator fireplace?
Heatilator fireplaces, also known as “old-style zero clearance fireplaces”, are a combination of heater and ventilator and are by their nature, fireplaces that circulate air. Blower – Old-Style Heatilator Fireplaces utilize a blower to circulate warm air throughout the room.
How much gas does a heatilator use?
For instance, the popular Heatilator Novus nXt costs a mere . 32 cents per hour* to operate. So, enjoying a fire for an entire evening can cost as little as $2. That’s a small price to pay for the ambience and warmth that will fill your home.
What is a good fireplace efficiency?
Most fireplaces have a fuel efficiency rating. As a guide, a fireplace with a 70-80 percent efficiency rating would be a dependable choice. Annual Fuel Utilization Efficiency (AFUE) is typically used with appliances that continually cycle on and off to maintain a constant temperature, such as a furnace.
Can I cover up Heatilator vents?
Fans can be disconnected or removed, of course, but the vents are not intended to be covered or plugged.
Can you put gas logs in a Heatilator fireplace?
Boisterous flames paired with our authentic-looking logs make Heatilator gas log sets the perfect, cost-effective upgrade for any existing wood-burning fireplace. Maintenance free and easy to install, our gas fireplace log sets make it possible to enjoy old, outdated fireplaces as if they were brand new.
How do I get rid of Heatilator logs?
Remove the logs carefully from the fireplace in a box, take them outside and use a soft brush or vacuum to clean them. Make sure you replace the logs exactly as they were originally placed.
Why is my fireplace flame so small?
The little flame you see in your gas fireplace after you have turned it off is called a pilot light. A Standing Pilot Light runs constantly, whether your fireplace is on or off.
How do you change the flame from yellow to blue?
On most stoves, the air shutter is just behind the burner gas valve. It is a sliding plate or tube that covers the burner air vent. Loosen the set screw that keeps the shutter from moving. Turn the burner on fully and slowly open the shutter until the flame turns blue.
Where do I find my Heatilator model number?
The model and serial numbers are located on a “rating plate,” which is a metal plate that’s usually permanently affixed to the fireplace, insert or stove. In gas fireplaces, the rating plate is found in the controls area.
Can you put a insert in a Heatilator fireplace?
An insert will transform your inefficient, open-burning masonry built wood fireplace into a beautiful heat producer. As the name suggests, a fireplace insert fits directly into your existing fireplace, greatly enhancing its performance and beauty. Inserts are available in multiple designs and fuel types.
Why is there a hole in the bottom of my fireplace?
An ash pit is a hole in your firebox in which old ashes can be placed. Its convenient location allows you to sweep in any ashes and embers, then seal them in by closing a small door. Ash pits are designed to withstand the heat from your fireplace while being easily accessible for the homeowner.
