Table of Contents
As the table shows, no 2×8’s meet the span and spacing requirements, but a 2×10 with an E of 1,300,000 psi and Fb of 1093 psi can span 15 feet 3 inches – more than enough. A 2×12 with an E of 800,000 psi and Fb of 790 psi also works, since it can span 15 feet and 10 inches.
What is the maximum span of a 2×12?
Max. Live Load 60 lbs/ft2 (2873 N/m2) Maximum Span (ft – in) Nominal Size (inches) Joist Spacing Center to Center (inches) Lumber Grade 2 x 12 12 17′ – 5″ 16 15′ – 1″ 24 12′ – 4″.
How big of a beam do I need to span 20 feet?
Wood beam size for a 20 foot span:- as per general thumb rule, for a 20 foot span, size of wood beam or lumber joist should be 2×14 which placed at 16″ apart from centre used for residential building or projects or construction in which depth of section of beam is 350mm (14″) and width of beam is 50 mm or 2″.
How far can a 2×12 span for a deck?
10″ Joist Spacing (o.c.) 24″ Douglas Fir-Larch, Hem-Fir, Spruce-Pine-Fir 2×8 9′-1″ 2×10 11′-1″ 2×12 12′-10″ Redwood, Western Cedars, Ponderosa Pine, Red Pine 2×6 6′-10″.
What size lumber can span 16 feet?
What size floor joist to span 16 feet:- as per general rules and guideline, a 2×8 (2-by-8) size of floor joists made of southern yellow pine, graded as #1 can allows joist spans up to 16 feet for a live load of 30 pounds per square foot and dead load of 10 pounds per square foot when spaced 16 inches apart.
How far can a double 2×12 beam span?
A double 2×12 beam can span 12 feet; a (2) 2×10 can span 10 feet and so on.
How far can 3 2×12 span?
Dimensional Lumber Deck Beam Span Chart Joist Spans Southern Pine 3-2X8 10′-7″ 3-2X10 12′-9″ 3-2X12 15′-0″ Douglas Fir-Larch, Hem-Fir, Spruce-Pine-Fir, Redwood, Cedars, Ponderosa Pine, Red Pine 3X6 OR 2-2X6 5′-2″.
What size lumber can span 24 feet?
In general terms, joist or beam which spaced 16 inches apart on Centre can span 1.5 times in feet their depth in inches. A 2×16 can span upto 24 feet.
What size beam do I need for a 16 foot span?
Wood beam size for a 16 foot span:- as per general thumb rule, for a 16 foot span, size of wood beam or lumber joist should be 2×10 which placed at 16″ apart from centre used for residential building or projects or construction in which depth of section of beam is 250mm (10″) and width of beam is 50 mm or 2″.
What size LVL Do I need to span 22 feet?
What size lvl beam for a 22 foot span:- as per general thumb rule, for a 22 foot span, size of LVL beam or GLULAM should be 10 to 12 inches deep and 4 inches wide, thus you need something like a 10-12″ GLULAM or LVL to span upto 22 feet and can use simple 2×14 dimensional lumber at 16″ apart from centre as floor joists.
Can a 2×10 span 16 feet?
The length of one 2×10 joist span depends on the wood species and how far apart it is from the next 2×10. A 2×10 southern yellow pine joist can span 16 feet and 1 inch without support. A doubled 2×10 beam can span 11′ without support for a deck that is 4′ wide.
What size beam do I need to span 18 feet?
What size lvl beam for a 18 foot span:- as per general thumb rule, for a 18 foot span, size of LVL beam or GLULAM should be 9 to 10 inches deep and 3 inches wide, thus you need something like a 9-10″ GLULAM or LVL to span upto 18 feet and can use simple 2×12 dimensional lumber at 16″ apart from centre as floor joists.
How much weight can a 2×12 beam hold?
A 2×12 can hold approximately 180 pounds per foot or approximately 2,100 pounds in total.
What size beam do I need to span 15 feet?
Wood beam size for a 15 foot span:- as per general thumb rule, for a 15 foot span, size of wood beam or lumber joist should be 2×10 which placed at 16″ apart from centre used for residential building or projects or construction in which depth of section of beam is 250mm (10″) and width of beam is 50 mm or 2″.
What size LVL do I need for a 20 foot span?
What size lvl beam for a 20 foot span:- as per general thumb rule, for a 20 foot span, size of LVL beam or GLULAM should be 10 to 12 inches deep and 3 inches wide, thus you need something like a 10-12″ GLULAM or LVL to span upto 20 feet and can use simple 2×14 dimensional lumber at 16″ apart from centre as floor joists.
What size lumber Do I need to span 12 feet?
A rule of thumb is 1.5 times a joist’s depth but in feet when spaced at 16” centers. In general, a 2×8 will span 1.5 x 8, so 12-feet.
What size beam do I need for a 30 foot span?
What size lvl beam for a 30 foot span:- as per general thumb rule, for a 30 foot span, size of LVL beam or GLULAM should be 16-18 inches deep and 4 inches wide, thus you need something like a 16-18″ GLULAM or LVL to span upto 30 feet used for residential building or projects.
What size I beam do I need for a 12 foot span?
If the span of the beam is 12 feet, then the depth of the beam will be 12 inches, beam depth taken as 12″ and beam width 12/1.5=8, taking as 9″.
Can a 2×10 span 18 feet?
A #2-2×10 joist can span between 11′-5” and 18′-0”, as a rafter between 13′-9” and 21′-7”, and as a beam 3′-6” and 13′-0” or more. The span depends on spacing, lumber species, and grade, and for a beam, the lamination thickness, as well as numerous other factors.
