QA

Quick Answer: How Far Should A Freestanding Tub Be From The Wall

How far should the distance be between freestanding tub and wall? The distance between your tub and wall should be between 15-18 inches or at least 1 foot.

How much room do you need around a freestanding tub?

The Magic Number: 6 Inches As a rule of thumb, the minimum end-to-end (length) additional space you’ll need for a clawfoot, pedestal, or freestanding tub is 6 inches. Any less and the tub will look cramped in the space.

Can you put a freestanding tub against a wall?

Freestanding tubs are normally not installed against a wall. Although the first thing any bathroom designer should consider is where they will put the shower. Once you have the location of your shower picked out, then you will have a better idea of where you should install your freestanding bathtub.

How much space should be between tub and wall?

Plan a clear floor space of at least 30 inches from the front edge of all fixtures (lavatory, toilet, bidet, tub, and shower) to any opposite bath fixture, wall, or obstacle. Code Requirements: A minimum space of 21 inches must be planned in front of the lavatory, toilet, bidet, and tub.

How much space should be between vanity and freestanding tub?

Professional Recommendation. When deciding on placement, make sure there is at least 30 inches of floor space between the vanity and tub. The National Kitchen & Bath Association recommends a minimum of 30 inches of clear floor space alongside a tub.

What is a good size for a freestanding tub?

The Most Common Freestanding Tub Sizes While the most common freestanding tub models are usually 4.5 ft. to 6 ft. long, we think the 60” long freestanding tub size is the most universally appealing to American homeowners.

How far should tub filler be from tub?

Tub Height – most tubs are between 22″ – 28″ tall. The water exit point of the spout of the tub filler should be about 6 inches above the tub. Any higher and there may be some unwanted water splashing on the side of the tub filler.

Do you tile under a freestanding tub?

You Can Tile Under A Freestanding Tub When it comes to installation, a freestanding tub gives you much more freedom. You can even place one in the center of your bathroom if you want. It’s also generally easier to clean around a freestanding tub if you lave some space between the tub and the walls.

Do you need to waterproof under a freestanding bath?

– Concrete or compressed fibre cement flooring under a vessel (bath) is to be water resistant. – Timber floors under a vessel are to be waterproof. – Wall must be water resistant below the lip of the vessel. – Wall & floor junctions must be water resistant for the full extent of the vessel.

How close can a switch be to a bathtub?

Switches shall not be installed within wet locations in tub or shower spaces unless installed as part of a listed tub or shower assembly. {NOTE: According to both the NEC and the IRC a damp/wet location is in the area within 36 inches of either edge of a tub sink or basin and/or an area that is subject to “spray”.

How much space should be in front of bathtub?

As you plan the location for your tub, remember that designers recommend the free space in front of the tub should be a minimum of 60 inches long and 30 inches wide, to allow users to safely enter and exit the tub.

What is the min/max distance for switches and outlets near a bathtub?

You should keep the receptacle at least 6 feet away from the edge of a bathtub or shower and at least 1 foot away from sinks.

How do I stop my freestanding tub from moving?

Carefully set the tub in position and adjust the tub feet as necessary until level. Once level, apply a generous bead of silicone on the bottom of the feet. This will prevent the tub from shifting after installation.

Can you put a freestanding tub in a small bathroom?

You can find these as small as 41 inches wide, which is perfect for a small bathroom. They also are available as oval or round freestanding tubs in various finishes, such as stainless steel, copper, or the traditional wood. Another way to fit a tub into a small bathroom is to consider installing a corner bathtub.

What should I look for when buying a freestanding tub?

Make sure the interior space of your freestanding bathtub is large enough to suit your needs – consider your height, your weight and your intended use for the bathtub. Over the years, freestanding bathtubs have become available in a variety of styles.

Where do you put soap with a freestanding tub?

According to Fine Homebuilding, storage is an important but often overlooked aspect of freestanding tubs. They say that soap, shampoo, towels and other toiletries should always be within arm’s reach from the tub.

Can you sit on the edge of a freestanding tub?

It weighs 360 pounds and holds 57 gallons of water. Size: The tub takes up more space than a built-in as it needs room all way around. Remember, you’re going to need to clean around it, so you don’t want it too close to a wall. “You don’t want someone to sit on the edge of the tub and have it tip over,” he says.

Where do you put a freestanding tub faucet?

If the tub is a freestanding, high-backed, slipper tub, the faucet should be placed along the lower end for the bather’s comfort, and to allow easy access into and out of the tub.