Table of Contents
Guidelines for T-Post Spacing The writers from Civiconcepts provide an overview of T-posts and fencing in general, in which they determine that 8 to 12 feet apart between corner posts is okay. Corner posts can be safely spaced between 12 and 15 feet apart if you’re using high-strength posts and fencing material.
What size t post do I need for a 4 ft fence?
When figuring out what size T-post to use for a four-foot fence, remember that you will drive the posts about two feet into the ground. This means you need posts that are at least 24 inches longer than how tall you want your fence. For a four-foot fence, you should use T-posts that are at least six feet long.
Can fence posts be 10 feet apart?
Typical spacing is right around 8 feet between each post however different circumstances may call for different measurements and it is not uncommon to have spacing between posts reach up to 10 feet. Once you have a rough idea of your post layout start by digging your first hole.
How far apart should T posts be for cattle?
Fence posts need to spaced 50-100 feet apart. Using the right energizer.
What size t post do you need for a 5 foot fence?
Anchor posts should be treated like any wood post and go down at least 2.5 feet for a 5 foot tall fence. (The bigger the post, the deeper you want to set it.) T-posts have “blades” on them that should be buried, again, at least 2 feet for a 5 foot fence I would think.
How far apart should fence posts be for wire fence?
Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.
Is 2 feet deep enough for fence posts?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
How far apart should concrete fence posts be?
In most cases, this will be around 1.83m or 6 feet. If you are installing feather edge fencing or similar where you don’t have any specific width panels as yet, go with 6 foot spacings as fence posts should ideally be spaced 6 or 8 feet apart to provide the best levels of support.
Does fence go on inside or outside of posts?
Fence posts should be on the outside of the fence The correct installation of ag fencing is to place it on the inside of the posts. This way, animals in the enclosure brush against the wire, not the posts.
Should fence posts be 6 or 8 feet apart?
Fence posts should be set six to eight feet apart on a 6 foot wood fence. Do not go beyond eight feet or the fence may not be stable enough.
What size t post do I need for a 6 ft fence?
Measure the height of rolled fencing wire with measuring tape. Wood fence posts need to be one-third longer than the height of the fencing wire. For example, fencing that is 6 feet tall requires 8-foot tall wood fence posts.
What happens if fence posts aren’t deep enough?
Anything less than 24 inches will put your fence at risk of blowing over in adverse weather conditions. Remember, these are wood posts that have been set in concrete, if your fence post isn’t deep enough, it is prone to snapping and collapsing all of your hard work.
Is cement required for fence posts?
Do Fence Posts Need To Be Set in Concrete? No, fence posts don’t need to be set in concrete, and there are plenty of other ways to fix your posts if this feels a bit too permanent. If you are using wooden posts, concrete may actually be the worst option.
How many bags of concrete does it take to fill a post hole?
Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.
How big of a hole do you need for a 4×4 post?
The diameter of your post hole should be three times the diameter of your post. So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter. For a six-foot-high fence post, we would need a hole that’s 36 inches deep and 12 inches in diameter.
How deep should an 8 foot post be in the ground?
In general, holes should be at least 3 feet deep for posts that extend 8 feet or more above ground level. Posts that extend 6 feet above ground level should have holes at least 2 1/2 feet deep.
What is the difference between Postcrete and concrete?
Depending on its application, traditional concrete can take between 24-48 hours and 7 days to set properly and will reach its optimum strength after 25-28 days. Postcrete, on the other hand, is the name given to a post mix concrete, which is a ready to use blend of concrete ingredients that requires no mixing.
Who gets the nice side of the fence?
The finished side should face toward your neighbor. Not only is this more polite, but it’s the standard. Your property will look a lot nicer with the “good” side facing the outside world. Otherwise, your fence will look like it was installed backward.
What is considered the good side of a fence?
– The Good Side Faces Out. As a general rule of thumb, the “pretty” side of the fence faces outward. The side with the rails and posts will be visible inside your yard, and the smooth side will face your neighbors, the street or the alley. Giving your neighbors the pretty side of the fence is considered good etiquette.
Where should fence posts go?
Customers having new fencing installed often ask us exactly where they should position their new fence. Getting it right avoids (potentially costly) disputes over encroachment in the future. As a rule of thumb, the outer face of the fence should be placed along the boundary. The posts should stand on your land.
