Table of Contents
How long does flocculant take to work?
Flocculant, although fast-acting, will still need around 8-16 hours to work its magic. It’s easiest to do this overnight. The pump definitely needs to be off as you want the water to be still. The floc will have settled at the bottom of the pool and will require manual vacuuming to remove the debris.
How long does it take for floc to settle?
Floc doesn’t kill algae. It just coagulates the tiny particles in the water so they can settle out or be filtered. It’s the last step after everything else is fixed. That being said, Floc takes 24-48 hours to settle out with the pump OFF.
Why is my pool still cloudy after flocking?
Low chlorine level is the primary cause of cloudy water. If all the chemicals are balanced, but water is still cloudy, there might be fine particles inside the pool, and you need to use a clarifier or pool flocculant and then vacuum up the pool. If all do not work, try backwashing your filter since it might be clogged.
Can you put too much floc in pool?
Too much floc can detract from the beauty of your pool. Without proper care, swimming pool water can turn cloudy and change color. Flocculation refers to suspended particles in the water that give it a murky appearance.
How long after flocculant Can you swim?
It is recommended to wait at least 20 minutes to an hour after adding water balancing chemicals. You should wait 2-4 hours (or one full cycle through the filter) to swim from the moment you use calcium chloride in your pool. It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours.
Can I shock and floc at the same time?
Answer: Shock can be added at any time. Especially since you are treating a green pool. The hot sun can tend to burn off chlorine faster, but the green pool needs to be treated and the sooner, the better. The chlorine will remain high for a few days after shocking anyway whether or not the sun is out.
How do I make my pool water crystal clear?
In theory, if you have a cloudy swimming pool, you can add chlorine to “shock it” and clear things up. Chlorine will get the job done. But, the amounts may vary and you may have to really pound the pool with chlorine to get the water totally clear.
Can you swim after adding flocculant?
If you’ve added flocculant, swimming in the pool is not recommended because it reduces the flocculant’s effectiveness. You should only swim after the particles have sunk and been removed from your pool floor.
Does flocculant expire?
“Dry” flocculants are very concentrated and extremely hydroscopic so they need to be kept away from water and moisture. If this type of flocculant is kept dry, it can last more than a year. Aging the flocculant solution for 30-60 minutes after make-down usually helps allows for more efficient use.
Will floc clear a cloudy pool?
Pool floc binds particles (and dead algae) that are making your water cloudy together and sinks to the bottom of your pool so you can easily vacuum out the cloudy mess.
Does too much chlorine make pool cloudy?
Excessive levels of pool chemicals can cause your water to become cloudy. High pH, high alkalinity, high chlorine or other sanitisers, and high calcium hardness are all common culprits.
What’s the difference between flocculant and clarifier?
The main difference between the flocculant and pool clarifier is where the clumped particles go. You can also leave the pool filter off overnight while the pool floc goes to work, which is one less thing to do. Flocculant also works much faster than the pool clarifier.
How many times can you floc a pool?
It may even be that you are not filtering enough. You should be turning your pool over – moving your entire pool volume through your filter – at least twice a day (three times a day for a commercial pool).
Will clarifier clear a green pool?
ADD POOL CLARIFIER The change in your pool water colour means that you have successfully eliminated the algae and can now clean it out of your pool. If your water is still green, wait another 24 hours and redo the steps from Days 1 and 2. This may take up to a few days for very cloudy pools.
Can you add floc and algaecide at the same time?
Polyquats interfere at very high levels. If you have already added a large amount of algaecide, the floc may not work. That’s why we like to floc first. If you need to add algaecide before trying the floc, use an elemental copper algaecide.
How do you use a flocculant drop out?
Use HTH Drop Out Flocculant Distribute the flocculant evenly over the entire pool surface. Keep the pump running for two hours and then turn off. Allow the particles to settle to the pool bottom overnight and then vacuum debris to waste. Backwash or clean the filter and enjoy crystal clear water.
Is it OK to put chlorine tablets in the skimmer?
Never put chlorine tablets into the skimmer baskets of your pool. High levels of chlorine close to the pool pump, pool filter, and pool heater can damage the equipment. The pool heater is especially susceptible to having the copper in the heater get into the pool and ruin the pool plaster.
Can I use clarifier after flocculant?
Do you use Clarifier in conjunction with Flocculant? Flocculant can be used after clarifier. However, using too much of any product can work against the clarifying process.
