Table of Contents
Shower Curtain Rod Height A standard shower curtain is typically 72 inches long, so the curtain rod should be installed around 75 to 77 inches from the floor. This height will keep the shower curtain from touching the floor.
Where should shower curtain rod be placed?
For best fit, shower curtain should be 6″ – 12″ wider than shower rod. Mount rod approximately 3″ inside the point a straight rod is normally mounted. The midpoint of the rod should extend several inches past the outside rim of the tub. Depending upon tub model, mount rod between 6″ and 8″ from center line of the tub.
How high should a curved shower curtain rod be?
The standard shower curtain is 72 inches (183 cm) long, and when it is linked to shower hooks, it usually gains another two inches (five cm). To prevent the curtain from dragging on the floor of the tub, hang the curved shower rod at a height of 74 inches or more.
Should shower curtain be higher than shower head?
The rule of thumb is to put the shower curtain rod three to five inches higher than the shower curtain’s length. At the least, you want the curtain to hang at least six inches past the rim of the tub.
Does the shower curtain rod go inside the tub?
Ideally, the curtain should be hanging inside the tub, keeping the water from getting out of your shower area. Hence, if you’re not using your bathroom, you can put it outside to hang. Indeed, shower curtains have a significant role in protecting the tiles outside your shower area.
How do you measure a curved shower rod?
Measure from either the wall of the tub or the floor, just as long as the mark on both walls is at the same height. Extend the measuring tape from the wall at the front of the tub or shower enclosure to the wall at the other end — lengthwise — of the shower enclosure. Mark down the measurement on a piece of paper.
Should a shower curtain touch the floor?
The average length of a shower curtain is 72 inches long and should be installed 75-77 inches from the floor, that way it isn’t touching the floor. However, many people deviate from this for reasons such as aesthetic, preferring the look of the curtain touching the floor.
Why use a double shower curtain rod?
Because the double rod separates the curtain and liner, there is more space between the two, so drying is more efficient, reducing mold and mildew.” From a design point of view, the double rods can also help brighten things up by allowing you to leave the decorative curtain open while bathing to bring in more light.
Should you leave your shower curtain open or closed?
A shower curtain should be closed when not in use. Once you leave it open, mold and mildew can develop inside the folds. This is because an open shower curtain folds on itself which makes causes the water to get trapped between the plastic and makes it hard to dry. This can eventually cause mold to grow.
Should shower liner be shorter than curtain?
No, your shower curtain is not supposed to touch the floor. The simple reason for this is it will help prevent the bottom of the curtain from collecting too much moisture and dirt. Therefore, leave at least two inches of space between the curtain hem and the bathroom floor.
Can you use shower curtain without liner?
While it’s certainly possible for fabric shower curtains to go without a liner, it is not recommended. Since fabric curtains can retain a lot more water, you’ll want to add a liner to protect it and provide additional privacy.
Why do hotels have cloth shower curtains?
They are decorative, in keeping with the decorative scheme employed in the bathroom. They also provide privacy for the person showering. However, they also are available in clear plastic. As others have said, having a clear curtain and/or liner allows light into the shower.
Can curved shower rods be cut to fit?
You have to cut the rod long enough to span the distance, but it needs to have clearance on both ends to fit on the hangers. The instructions that come with the rod should advise you of the proper clearance.
What size shower rod do I need?
Measure the width of the entire space the curtain will fit over. This typically is the front section of the shower or bathtub. Measure in inches, then choose a rod that fits the opening. Keep in mind that standard shower curtains are 70 or 72 inches wide.
How far from floor should curtain hang?
The proper position is ½ inch above the floor for free hanging curtains. This distance allows for mopping and cleaning while creating the illusion that the curtain touches the floor.
Where should a shower curtain liner fall?
The rough side of the liner should face the backside of the shower curtain. The smooth (good) side of the liner should be visible when you are standing in the tub.
Do you need a double shower rod?
Always just one – shower rods/rings/curtains are designed to fit on one rod. Windows sometimes need double curtain rods, but not shower curtains. That’s why if the shower curtain has a valance, it’s attached right onto the curtain, below the holes for rings. On a window you’d need to use two rods (or a double rod).
Can you put two shower curtains one rod?
Yes, you can hang double shower curtains on a single rod. All you need is some creativity and several simple items you most likely already have at home. These items include industrial hooks, a cord, or typical curtain rings.
Are double shower rods better?
Though, mainly a double shower curtain rod is used for hanging the liner and decorative curtain separately, adding more space between the two, ultimately resulting in a better and efficient drying process.
