Table of Contents
For most string lights, about eight to 10 feet is perfect. If you have larger bulbs, you may want to hang the lights a little higher.
How do you measure for outdoor string lights?
Length: The best way to estimate the length you’ll need is to use twine as a stand-in, stretching it from point to point exactly where your lights would go. (Don’t forget to include enough to reach the outlet.) For columns or trees, measure once around and multiply that by how many times you’ll wind your light around.
How far apart should string light posts be?
The average spacing between sockets on a patio light string is at least 12 inches. However, spacing can range from 12 inches to 3 feet wide.
How many feet of string lights do I need?
The good news is that you don’t need complex math to solve this problem. Simply buy string lights that are 2 to 6 feet longer than your linear measurement to create the swag of your choice. It’s always better to have more string length than you need because you can always shorten it by doubling it up on the ends.
How far can you run string lights?
From 10 feet to 400 feet in length, patio string lights can be used pretty much wherever and however the mood strikes you.
How many string lights do I need for my patio?
Typically, you can attach three to five strands of patio lights together, depending on the length of each strand. However, each manufacturer indicates on the box the number of strands that can be connected.
How do you hang patio lights on a patio?
Step 1: Select Anchor Points. Lay string lights around the perimeter of your deck. Step 2: Install Screw Eyes. Predrill holes into the wood structural supports in your marked locations. Step 3: Attach String Lights with Carabiners. Step 4: Install Light Bulbs. Step 5: Attach String Lights to Power.
How do you hang string lights outside without trees?
7 Ways on How To Hang String Lights in Backyard Without Trees Hanging Lights on 4X4 Posts. Using Metal Pole and PVC. Along the Fence Lighting. Deck Lighting. Gazebo or Pergola or Covered Patio String Lights. String Lights on Umbrella. Use Planters to String Backyard Lights.
How much slack do I need for string lights?
Be sure to purchase enough yardage with plenty of extra space for slack. Remember, string lights are normally draped – the cables will not be pulled taut. Allow at least 12-inches of extra cable per strand.
How do you make string light posts?
Step 1: Mix Concrete in Barrel. The concrete should fill about 1/2 to 3/4 of the barrel to provide enough stability for the posts. Step 2: Insert and Support Post. Step 3: Add Drainage Holes to Planter. Step 4: Fill With Gravel, Soil + Plants. Step 5: Add Hooks. Step 6: Enjoy.
How do you hide extension cords for outdoor string lights?
Start by attaching one end to the tree canopy (use the plug end to make it easier to hide the extension cord). If your lights don’t have built-in clips, use zip ties to secure. 6. String the lights along the branch towards the post; when you reach the post, wrap the wire around one of the hooks.
How can I light my backyard at night?
14 Lighting Ideas for the Perfectly Bright Backyard Mix Up Different Lighting Styles. Uplight Trees to Create a Moonlight Effect. Illuminate Walkways. Sprawl Light Orbs Across the Fence. Light Up Water Features. Plant Tiki Torches. String Lights Up Tree Trunks and Branches. Create Shadows with Spotlights.
How do you hang outdoor string lights on siding?
All you need are these vinyl siding clips. To attach them to the hooks, I just used an old wire coat hanger to loop through the screw holes in my boxes, twist, and hang them up. The little hooks made it really easy to string our outdoor lights to the corner of our house too.
Can you leave patio string lights out in winter?
Yes, these string lights can be left out during the winter.
How long do outdoor string lights Last?
LED strings will generally last for 35,000 to 50,000 hours, or six years of continuous use, before they diminish to 70 percent of their original output. Blast them all night if you need.
Do patio string lights attract bugs?
Patio Lights That Don’t Attract Bugs LED lights emit very little heat while burning and very little UV light, both of which attract bugs. However, yellow or warm-hued lights tend to be less visible to flying insects helping to keep them away.
How do you hang outdoor lights on concrete?
If you prefer, put concrete around the post almost to the top of the container. Let it dry and cure. Then sit small, potted plants on top of the concrete. Use a ladder to drape the lights over the hooks at the top of the posts or attach them to the hooks with twist ties.
Can I use PVC pipe to hang string lights?
It can be a little tricky when hanging lights on a slope. You will want to dig an 18″ hole and then place a PVC Pipe into it. Just make sure it goes below the grass line. We used a level to help guide the pole around and make sure it was straight up and down.
