QA

How Long Does Car Window Tinting Take

Car tinting can be done by professionals in about two hours or less, depending on the number of windows. DIY window tinting by a first-timer will probably take much longer. Perhaps the longest part of the process is cleaning the windows before applying the tinted film.

How long does it take to tint a car?

Tinting all the windows of your car can take anywhere from two to four hours. Full-sized sedans take about one to two hours to install. If you only want to tint your two front doors, thirty to forty minutes is usually the time it takes to tint those windows.

How long should I wait to roll down windows after tint?

Do I need to wait to roll my windows down? We recommend that you leave your vehicle windows rolled up for at least 24 hours after window film has been installed. This allows the film to cure and adhere to the glass before the window is moved.

Can I roll my windows down 3 days after tint?

It takes some time for the tint to dry off against the glass surface. In case you roll down the panes too early, chances are high that the tinted coating would peel off. This is why seasoned professionals recommend car owners to wait for approximately three to four days after getting it installed.

Does tint get darker after a few days?

The tint on your window does appear to get darker over the first few days or weeks after installation, but the key word here is “appear”. In actual fact, the tint remains the same shade. It’s the adhesive that changes. From there on out, your tint will ever so slowly get lighter as a result of sun bleaching.

Is it OK to wash car after tint?

Yes, you can wash your car after getting the windows tinted. The tint is applied on the interior part of the windows, and a car wash will clean your vehicle’s exterior! However, don’t wash or clean the interior part of the window just after it’s tinted. The window cleaning process is simple.

How do you know if a tint job is good?

To tell if a car has a quality tint, see how close the film comes to the window edge, and take note of how consistent and clean the line is. A top-notch installer uses computerized templates that pre-cut the film as much as possible, resulting in a line that’s close to the edge of the window pane and doesn’t waver.

How do I know if my window tint is cured?

Generally, as the haziness subsides, it indicates that the tint is drying, but give it another day. Hazy and foggy windows are typical during the tinting process since water evaporates between the tint and the glass. It lasts a day or two before clearing up from the water evaporation through the window.

Can I turn on AC with new tints?

Once you’ve had the films applied, do keep your windows closed in the daytime so the films can do their job blocking the UV rays. Let your air conditioner, not an open window, provide cool air.

Will bubbles in tint go away?

It’s common to see small bubbles under freshly-installed tint. Normally, these bubbles should go away within a couple of weeks and should be very small. They may take longer to go away in cold weather and vanish faster in heat. Excessive bubbling is probably a sign that your tint needs to be redone.

What can you not do after tinting windows?

Infographic: Five Things to do After Tinting Car Windows Do not be frustrated with window tint bubbles. Skip the car wash a few days after installation. Let the window tints dry. Do not roll the windows down after tinting. Do not assume that the tints make the window invincible.

Does tint block heat?

Metalized window tints help reduce heat by reflecting it away from your car. By reflecting the sun’s rays, metalized window tinting can reduce glare and block harmful UV rays. Not only does a metalized window tint reduce heat, but it also strengthens the windshield.

What happens if you roll your window down after getting it tinted?

A common question from customers who have just put tinted windows on their car, is “Why Can’t I Roll Down My Windows After Tinting?” The answer is that the adhesives holding the tinted window film in place take time to dry, and until they do, friction caused by rolling down the window could scrape film from the glass.

How long do bubbles stay in window tint?

In most cases, these bubbles disappear within two weeks, depending on the amount of sunlight that your car is exposed to. If the bubbles linger for longer than two weeks, it’s a sign of poor window film application.

Do tints go on the inside or outside?

Does the tint go on the outside or inside? The short answer is on the inside. First, the film is laid on the outside of the car’s windows and cut out to fit. Those pieces are then placed on a large piece of glass and trimmed before being installed on the inside of the windows.