Table of Contents
Run the water out of the hose for about 10 minutes in an area away from the well, septic system, landscaping, and bodies of water. The water may be discolored. Continue monitoring and running the water until it runs clear.
How long should you wait to use water after you chlorinate a well?
Once the chlorinated water has reached all the appliances, fixtures and faucets, let the chlorinated water stand in the well and plumbing system for 8 hours. WHILE THE CHLORINE IS IN THE SYSTEM DO NOT DRINK THE WATER. CONTACT WITH THE WATER MAY CAUSE SKIN, EYE AND NOSE IRRITATION.
Can you shower after shocking a well?
Do not shower for at least 24 hours after shocking your well. Waiting for one or two days more, if possible, is much better. Chlorine levels in the well water will go down only after freshwater dilutes and replaces chlorinated water. This process can take 1-2 days.
How long does it take to smell bleach when shocking a well?
3. Mix the bleach with the well water. Ⅰ Attach a hose to the nearest outside faucet and allow the water to run onto the ground for 1-2 minutes until you smell chlorine. Then place the hose in the hole where you poured the bleach, allow the water to run back into the well for 15-20 minutes.
What happens if you put too much bleach in well?
According to AskingLot, if you put too much bleach in your well, it can destroy the good bacteria found in the well, which can be a significant problem! The company also says that you should dilute the bleach with water so the pipes do not get ruined.
How long does it take for a well to clear up?
All in all, with all steps considered, it will typically take between 1 and 2 weeks to have a new well completely up and running. Of course, depending on several factors, it could take shorter or longer than this.
Can I shower after chlorinating well?
Keep in mind that doing laundry and taking a shower cannot be done for at least 24 hours with a chlorinated well. Waiting a few days to do these is a good idea. We recommend using unscented bleach for this process and using a chlorine test kit from your local supply store.
How do you remove chlorine from well water?
Yes, boiling water for 15 minutes is one way to release all the chlorine from tap water. At room temperature, chlorine gas weighs less than air and will naturally evaporate off without boiling. Heating up water to a boil will speed up the chlorine removal process.
Can a plumber shock a well?
A: The shocking (disinfection) of a well and plumbing system destroys any possibility of bacterial contamination to be present in the system. A: Ideal Water, as part of the services we perform, can shock your well for you. However, the directions for this process are here, should you choose to do it yourself.
Why does my well water turn brown when I add bleach?
The brown is the iron in the water that has oxidized as a result of the chlorination. Normally, the iron in water is in ion form and does not display itself until it combines with oxygen and forms common rust which turns the water reddish-brown.
Why is my water brown after shocking well?
Practically always after you shock-chlorinate your well the water turns brown. The chlorine used to shock the well reacts with iron, manganese and reducing bacteria in the well and it is pulled into the water chlorine solution. That is the brown you see. Rust or breakdown of the metals in in the well or house.
How often should I shock my well?
Homeowners with private wells should have their well water tested every 3 to 5 years for some contaminants, including bacteria. If these tests turn up positive for bacteria, chlorinating the well may be a way to resolve the problem.
Will Shocking well get rid of sulfur smell?
Shock your well with chlorine bleach or hydrogen peroxide to get temporary relief from sulfur odors. Often keeps odors away for 1 – 2 months.
Should I shock my well with bleach?
You can easily shock your well by adding plain unscented household bleach with a chlorine concentration of 5 to 5.25%. The amount of household bleach used varies with the type of well you have.
Should you put Clorox in your well?
Disinfecting Your Water You can disinfect your well with household chlorine bleach such as Clorox, Purex or a generic brand. The chlorine in the bleach kills bacteria. Note that it may take more than one chlorination for your well to return a satisfactory test. To disinfect your well follow this procedure.
Should I pour bleach down my well?
Do not use bleach with a “fresh scent,” lemon fragrance, or other cleaners added. One gallon of bleach will treat up to an 8-inch diameter well containing 100 feet of water. If your well is much larger, or if your distribution system is unusually large, expect to use more than 1 gallon of bleach.
How long can you run well water?
Most wells have a lifespan of 20-30 years. Since sediment and mineral scale build up overtime, water output may wane over the years.
Can you use too much well water?
The amount pumped out of the well and the amount going into the well from the surrounding groundwater need to balance, or the well will “run dry.” But, when too many wells tap into the same groundwater supply, a long drought occurs, or more water is used around the home than the well can supply, there can be problems.
