QA

Question: How Many Layers Of Shingles Can You Have

In most states, you’re only allowed to have 2 layers of shingles on a roof for fire safety reasons. However, you’ll still see roofs that have 3 or 4 layers today. If you already have 2 or more layers, a contractor will recommend a full replacement.

Can you have 3 layers of shingles?

No, you can’t put three layers of asphalt shingles on a roof. In most states, you’re only allowed to have two layers of asphalt shingles on a roof for fire safety reasons. But that doesn’t mean you won’t still see roofs with three or four layers today.

Is two layers of shingles OK?

Warranty issues: Most shingle warranties do not apply when shingles are layered over existing roofing, according to InterNACHI. Two layers of shingles trap more heat, which in turn damages the shingles and shortens the life span of the roof. Adding a second layer could compromise the structure of your roof.

How many times can you overlay a roof?

Installing new roof shingles over old effectively doubles the weight of the roofing, so you have to make sure your roof structure can handle the extra load. That’s also why building codes commonly limit re-roofing to no more than two layers.

How many times can you put shingles on top of shingles?

It is the process where roofers install a new roof over your existing one, i.e. add a new layer of shingles, which means that there is no tearing off of the old roof. It is important to know that this process can only be done once because you can only have two layers of shingles on your roof.

How long does a reroof last?

Longer lifespan – A new, properly installed shingle roof can last 20 to 30 years, meaning it could potentially outlast an overlay by a decade or more. Increased property value – A brand new roof can add more than $10,000 to your home’s resale value and also acts as a strong selling point.

Can you shingle over one layer of shingles?

You might be able to lay new shingles over existing shingles and avoid the cost of tear-off. Some roofers install a layer of waterproof shingle underlayment (WSU) over the existing shingles at the eave end, as would be done for a roof laid on bare sheathing. This provides added protection against ice dams.

Can you add another layer of shingles?

“Can I put a second layer of shingles on my roof?” You can, but you probably shouldn’t! Known as a layover, putting a second layer of shingles on your roof is in most cases inadvisable and a job that Proven Roofing is likely to even turn down.

Can you put a second roof over architectural shingles?

The quick answer is yes you can re-roof architectural shingles over existing architectural shingles (however you must check with the shingle manufacturer as well). Having said that it will be nearly impossible to get a good looking quality installation.

Can you repair a roof with multiple layers?

If you already have two layers shingles, the decision is made for you. The International Residential Code says that you cannot put a new roof over two or more applications of any type of roof covering. Part of the reason has to do with weight and its effect on the structure of your home.

Is it better to remove old shingles?

While a repair job can often be more convenient and somewhat more cost-efficient, placing new shingles over old ones is never a good idea. Whether repairing one section of roof, or a replacing a whole one, it’s always best to pull up the old shingles before putting down the new ones.

Is it better to tear-off old shingles?

In most cases, more than two layers of roofing shingles does require a tear-off. Laying new shingles over old shingles is easily prone to leaks and reduces the life of the new shingles. This alone ought to be reason enough to do a tear-off; it’s just a bad value not to.

How long do roof overlays last?

Overlays have a Viable Life An overlay is a viable option if the existing roofing materials have not already been overlaid. Home Reference.net notes that on average you can expect the overlay to last for fifteen or sixteen years.

What does Reroof mean?

Reroofing: The process of recovering or replacing an existing roof covering. Roof Replacement: The process of removing the existing roof covering, repairing any damaged substrate and installing a new roof covering.

Do you overlap shingles side by side?

When you reach a peak or hip, shingle all the way up the first side (until the reveal portion of the shingles is within 4 inches of the peak) and cut the 3-tab shingles just below the ridge. Shingle the other side and allow these pieces to overlap the ridge by no more than 4 inches.

Can you put a new roof on top of an old roof?

Roofing over an existing roof is also called reroofing or an overlay. It is the process where roofers install a new roof over your existing one, i.e. add a new layer of shingles, which means that the old roof will not be removed/teared off.