QA

Question: How Many Times Can You Refinish Hardwood Floors

Hardwood flooring can be re-sanded up to 10 times, depending on how bad the floor is and how skilled the person doing the sanding is. It costs about $2.50 per square foot to refinish a floor, plus $50 an hour for patching and thresholds.

How often can hardwood floors be refinished?

A solid hardwood plank at least 3/4 inches thick will likely need to be refinished four to six times during its total lifespan. It’s commonly accepted that you refinish every seven to ten years.

How many times can you sand and Restain hardwood floors?

Flooring experts estimate that hardwood floors can be sanded for refinishing up to 10 times, depending on the thoroughness of the sanding and the level of wear and tear on the floor.

How long does floor refinishing last?

Typically hardwood floors should be refinished every 8-12 years, but this varies depending on how rough you are with your floors. Some people don’t refinish/recoat their floors and are perfectly content leaving them the way they were installed.

Is it cheaper to refinish or replace hardwood floors?

In general, it will almost ALWAYS be less expensive to refinish your hardwood floors. If you replace them, you need to pay for additional wood as well as ripping up and hauling away existing hardwood. Even if you have this, it will still be less expensive then replacing the whole floor.

What is the best time of year to refinish hardwood floors?

If you are in the market to have your hardwood floors refinished this summer, then you might want to consider having it done while you are on vacation.

How many times should you sand a floor?

Flooring professionals can sand away as much as 1/16 inches of wood with the coarsest paper. However, some engineered floors cannot sustain more than one heavy-duty sanding, as they may have a surface veneer of only twice that thickness. Refinishing these floors more than once poses a risk of wear-through.

Can you refinish 1/4 hardwood floors?

Since most hardwood planks are manufactured with tongue and groove to interlock, it is necessary to leave at least 1/8 of an inch of wood at the top of the board, above the tongue and groove, for a complete refinish. It may be possible to refinish the floors if the boards are thinner than 1/8 of an inch.

How many times can you refinish 5/16 hardwood floors?

Solid boards, which are usually 3/4 inch thick, have a 1/4- to 5/16-inch layer that covers the nails. They can sustain, on average, four major sandings and up to 10 minor ones that primarily remove finish.

Can you sand hardwood floors too much?

Too much sanding can wear them down until they’re too thin. When you refinish hardwood too many times, it becomes less structurally sound and more likely to crack. After a few refinishes, it’s probably time to get a full replacement.

Can you stay in your house while floors are refinished?

The strong scent of polyurethane and stain lingers in the atmosphere for very long and can kick-start a migraine any time or all the time. Even if it’s not causing migraines, it’s still uncomfortable to live in a house where the floor is being refinished and there are strong odors in the air.

How much does it cost to refinish $1000 square feet of hardwood floors?

The cost to refinish 1,000 square feet of hardwood flooring averages between $3,000 to $8,000.

How soon can you walk on refinished hardwood floors?

How long do I have to wait to use my room after my floors are refinished? We recommend waiting 6 hours before walking on your new floors in socks. After 24 hours you can walk through with shoes on. Allow 48 hours before setting furniture and returning pets.

Do you tip floor refinishers?

You do not have to tip floor installers or refinishers. If you’re feeling generous, they are usually allowed to accept tips, but it is not mandatory or expected. If the installers do an exceptionally good job and you would like to tip them, then $10 to $30 per day is a suitable range.

How much does it cost to refinish 1500 square feet of hardwood?

Cost per square foot to refinish hardwood floors: Flooring square footage Average cost 751 – 1000 sq. ft. $2,100 1001 – 1500 sq. ft. $2,350 1501 – 2000 sq. ft. $3,500 2001 – 3000 sq. ft. $5,000.

Can you sleep in house after polyurethane?

We recommend a minimum of 2 days of socks-only traffic for floors finished with oil polyurethane. The house is not inhabitable for a minimum of 2 days after the job is completed, and better to stay out for at least 5 as the fumes/off-gassing is not advisable to breathe in, even if there are other rooms to sleep in.

Are my hardwood floors salvageable?

But here’s the thing: No matter how badly you wish it to be true, old wood floors aren’t always salvageable. Or there may be obvious damage upon first glance: “If there is significant water damage or deep-set staining, that could also prevent us from successfully refinishing an existing wood floor.”Aug 18, 2017.

Is it worth refinishing hardwood floors?

Refinish When: Things like dents and dings from heavy foot traffic or pet claws may make your floors look dull and worn, but that doesn’t mean that they have to be replaced. Simply sanding and refinishing your hardwoods should make them once more smooth and pristine without the hassle and expense of replacing them.