Table of Contents
1. Energy Consumption Technology Ballast Factor Operational Wattage 34 Watt T12 Fluorescent Tubes 0.88 43 Watts 16 Watt T8 Equivalent LED Tube 1 16 Watts.
How much wattage does a ballast use?
They consume eight to 10 watts when operating with the lamp in the circuit. The ballast will consume about four watts when the lamps are removed although the ballast is still energized. Electronic ballasts start and regulate fluorescent lamps with the use of electronic components.
How much power does a fluorescent light ballast use?
Electronic Ballasts On a typical fixture with two 4 foot 40 watt T-12 fluorescent lamps, the ballast consumes about 13 to 16 watts of electricity. Thus the total consumption of the two lamps plus the ballast is about 93 to 96 watts. The most efficient ballasts are electronic, or high-frequency ballasts.
Does ballast consume power?
Ballasts restrict the current through linear fluorescent, compact fluorescent and High Intensity Discharge (HID) lamps. They consume a small amount of power in the process – about 25% of the rated power of the lamp being operated.
What is the output of a T8 ballast?
This T8 Sylvania Replacement Ballast is a 59 Watt High Light Output Electronic Ballast for 2-8′ bulbs. Specifications: Rated Lumens: 6100. Number of Lamps: 2.
How many amps does a ballast draw?
Generally, most standard outlets have a capacity of 15 amps. When you plug a 1000 watt ballast in your 110 volts power supply, it draws nine amps.
Is ballast bypass safe?
Safety risk The most significant negative to a ballast-bypass linear LED is the risk of electric shock since the sockets carry line voltage. It’s a common practice to place a finger on the lamp pins while you are trying to install it, and this becomes a risky endeavor when using single-ended ballast-bypass lamps .
How many watts is a 4ft fluorescent bulb?
ANSI considers the 4-foot, 32-watt T8 lamp to be a rapid-start lamp, but it is commonly operated using an instant-start circuit in which the two pins on each end of the lamp are electrically connected or shunted together.
How many watts does a T5 ballast use?
Energy. A four-lamp bay using high output T5 lamps uses 220 watts of power including the power used for the ballast; a six-lamp T5 bay uses approximately 342 watts of electricity.
Do fluorescent lights use more electricity?
Fluorescent lamps, including compact fluorescent lights (CFLs), use about 75 percent less energy than incandescent bulbs and last six to 15 times as long, according to the U.S. Department of Energy (DOE). Otherwise, turn the light off.
Does a ballast reduce voltage?
Once the arc is established, the ballast quickly reduces the voltage and regulates the electric current to produce a steady light output. Thus, some ballasts have a separate circuit that provides a low voltage to heat the lamp electrodes during lamp starting and typically during lamp operation (Hammer, 1995).
How many watts does a 4 foot LED light use?
Luceco 4 Foot LED Hanging Shop Light allows you to easily bring bright and efficient LED light to your work area. Utilizing two integrated tubular LED bulbs, the fixture emits 3600 lumens. This easily replaces up to an 80 Watt traditional fluorescent shop light while consuming just a fraction, 36 Watts, of electricity.
How many lumens is a 32 watt T8?
A T8 fluorescent that uses 32 watts of energy typically produces 2500 lumens of light. It’s LED equivalent, while using only 17 watts, produces 2200 lumens. Additionally, T8 LED light bulbs have a lifetime rating of 50,000 hours, more than 3 times longer than 15,000 hour average lifespan of T8 fluorescent lights.
What is the brightest T8 fluorescent bulb?
The brightest four foot T8-sized LED tube light is the Barrina LED Shop Light Fixture. This tube shines with 5000 lumens using 44 watts. It replaces a 72 watt fluorescent tube.
How many lumens is a 40 watt fluorescent tube?
Lumens are the measure of total light intensity from a single source (in this case, a tube). The greater the lumens, the brighter or more intense the light. A 40-watt fluorescent tube, for example, is rated around 2300 lumens.
How many amps does a 600 watt digital ballast use?
Product Attributes Maximum Current 2.73 Amps/5.46 Amps Operates 400W or 600W Lamps Power Factor 99% Sold Separately 240V Power Cord THD 10%.
How many watts does a 1000w ballast use?
System watts are the total watts the lamp and the ballast use together. The system watts for a 400 watt metal halide is about 458 watts depending on the ballast.What is the difference between lamp watts and system watts? Metal Halide (MH) High Pressure Sodium (HPS) System Watts (approximate) 400w MH 461 watts 1000w MH 1080 watts 250w HPS 295 watts 400w HPS 460 watts.
How many amps is 1000 watts?
8.33 Amps Watts: Amps (at 120V): 1000 Watts to amps at 120V: 8.33 Amps 1100 Watts to amps at 120V: 9.17 Amps 1200 Watts to amps at 120V: 10.00 Amps 1300 Watts to amps at 120V: 10.83 Amps.
Do T8 LED bulbs need a ballast?
Most T8 LED bulbs do not need a ballast. The only type of LED tube that requires a ballast is plug-and-play. Used as direct replacements for fluorescent tubes, plug-and-play LED tube lights install without fixture rewiring, and operate off the existing fluorescent ballast.
Can a fluorescent light work without a ballast?
Reverted question “ Can I make a fluorescent light work without a ballast?” yes, you can, but you need something to reduce the current as the bulb warms up. So, you can drive a fluorescent with a pulse width adjustable power supply, but this is what is in an ‘electronic’ ballast.
Will LED lights work with a ballast?
No LED bulbs require a ballast, although some are engineered to work with an existing ballast. You will find ballast-compatible or “plug-and-play” LEDs that are designed to replace linear fluorescents, compact fluorescents, or HIDs. Incandescent and halogen lamps do not require a ballast.
