Table of Contents
Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.
How many bags of concrete do I need for a 4×4 post?
It’s right for a 4×4 fence post to have 1 bag per hole. The depth of the post hole should be half of the post height. For a 6′ above ground post, place 3 feet in the ground and use a post with an overall height of 9 feet.
How much concrete do I need for a post hole?
Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.
How deep should a 4×4 post be in the ground?
Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
Do 4×4 posts need concrete?
Setting Fence Posts in Concrete Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.
How many bags of concrete do I need for a deck post?
In order to have enough concrete for one cubic foot, you’ll require 2.2 bags of 60-lb concrete. Since bags are only sold in whole (not half, or quarter) quantities, you’ll need to purchase three (3) 60-lb. bags for one cubic foot.
Is 2 feet deep enough for fence posts?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
How do I calculate how much concrete I need?
Use the formula. Calculating the volume for concrete requires using three dimensions: length times width (which is area) times the height (thickness) or L x W x H. If you are using feet as your standard unit of measurement, this formula will give you the volume of concrete in cubic feet.
How do you calculate concrete for a round hole?
The formula for the volume of a round hole is pi r2 x depth. Or 3.14 x radius x radius x depth. The radius is half the width of the hole. Unless you are doing a monster hole it might be easiest to do this all in inches.
How deep should a 3 foot fence post be?
The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.
Should wood fence posts be set in concrete?
Concrete provides a strong foundation for wooden fence posts, but can rot them more quickly. Setting them in dirt, with or without gravel or crushed rock depending on your soil type, can help the posts last longer before going rotten. You can also use metal fence post anchors to prolong their life.
What happens if fence posts aren’t deep enough?
Anything less than 24 inches will put your fence at risk of blowing over in adverse weather conditions. Remember, these are wood posts that have been set in concrete, if your fence post isn’t deep enough, it is prone to snapping and collapsing all of your hard work.
How much gravel goes in the bottom of a post hole?
You should put approximately 2″ to 4″ of gravel in the bottom of the hole making sure that the Post stands 6′ 4″ tall from the ground to the top of the post.
Can you set fence posts without concrete?
Did you know that it is actually completely possible to set wooden posts in your yard without using ANY concrete? It’s true! Setting them without concrete will save you time and money, but there is a correct way to do it in order to prevent rot.
Can I set deck posts without concrete?
Plastic piers require the digging, but unlike footings, there is no concrete involved. The pier is put into the hole and attached the post, giving you your deck without wasting hours installing footings.
How long will a treated 4×4 post last in the ground?
A treated 4×4 will last 20 to 25 years in the ground if the conditions in the soil and climate are favorable. That number could increase to 40 to 75 years if you install the treated 4×4 in a cement ring rather than the soil. There are a few factors that influence how long the 4×4 can last in the ground.
What kind of concrete do you use for deck footings?
Decks and other permanent structures require deck supports and footings made from structure strength concrete mix. QUIKRETE 5000 is recommended for footing applications because of its heavy duty, 5000 PSI strength. Add the QUIKRETE 5000 concrete mix to the form.
How deep should I dig for a deck post?
Set footers a minimum of 6” below the frost line for your area to prevent movement during freezing temperatures. Pour about 6 inches of all-purpose gravel into postholes and pack the gravel tight by using the end of a wooden post.
What size footings do I need for a 6×6 post?
FOOTINGS: – Poured concrete footings should be a minimum of 8” wider than the posts (4×4 post – 12” min. width, 6×6 post – 14” min. width), a two level deck or deck with roof – 24”x24”. – The bottom of the footings must be a minimum of 36” below finish grade level.
