QA

Quick Answer: How Much Does A Car Water Pump Cost

The average water pump replacement cost is $550, with prices ranging from $461 to $638 in the US in 2020. But typically depends on the type of vehicle you drive and the auto repair shop you take it to. Labor costs are between $256 and $324 while parts cost between $205 and $314.

Is it worth replacing water pump?

Facts and figures: a working water pump only needs to be replaced after 60,000-100,000 miles, so if you have your car for less than 10 years, you may never have to worry about it. That being said, if you purchase your car used, it is a good idea to find out if the water pump has been replaced.

Can you drive a car with a bad water pump?

If your car’s water pump is bad, you need to get it replaced quickly or you’ll risk damaging your engine. Depending on a few factors, you can probably drive your vehicle 5-20 miles with a faulty water pump, which should be enough to get you to the nearest mechanic to replace it.

Are car water pumps expensive?

Most often your water pump replacement cost will be between $40 and $80 dollars. Exceptions to this price are the electric water pumps which will cost between $150 and $500 depending upon the model of car. A serpentine driven water pump is fairly accessible, so installation will range between $80 to $150.

How many hours does it take to replace a water pump?

On average, water pump replacement is a 3 hour job. You may pay less if you buy the pump yourself and give it to the mechanic to install, though use caution and make sure to buy the parts from a reputable source.

How many years does a water pump last?

The average lifespan of a water pump is similar to the lifespan of a timing belt. They usually last 60,000 to 90,000 miles with the proper care. However, some cheaper water pumps may begin leaking at as low as 30,000 miles.

What are the signs of a water pump going out?

Five Signs Your Water Pump Is Failing Overheating. A dead or dying water pump cannot circulate coolant through your vehicle’s engine and, as such, the engine will overheat. Coolant Leaks. Coolant leaks from the water pump are common and a clear sign that it’s time to replace the pump. Corroded Water Pump. Whining Noises.

Will Stop leak fix a water pump?

It works on plastic, aluminum, and metal radiators in heater cores, engine cooling jacket, gaskets (including head gaskets), water pumps, and freeze plugs.

What causes a water pump to go out on a car?

The most common water-pump failure is due to worn bearings. Water pumps move a tremendous amount of coolant, and they just simply wear out over time. And mixing coolants, or using the wrong coolant, can cause damage to the water-pump seals and bearings, and can lead to the impeller shaft to fail.

How hard is it to replace a water pump?

While removing the pump is not difficult, you must have experience removing and replacing timing belts and their various components. It takes just as much work to get down to the timing belt as it does the water pump, therefore you should plan on replacing the belt at the same time.

How much is a timing belt and water pump?

If You are going to be replacing both parts You will want to purchase a full timing belt and water pump replacement kit and these will range in cost from $100 to $175. If You have this kit installed by a mechanic You will be looking at spending an extra $300 to $600 in labor costs.

Should you replace thermostat when replacing water pump?

its a good idea to replace the thermostat whenever replacing a water pump. The thermostat may have suffered some damage during the overheating that occurred before the water pump failed.

Will water pump leak if engine is off?

This test will put your cooling system Under Pressure without the engine running to avoid the sound of the engine and the air of the engine cooling fan. This helps to easily spot cooling system leaks. If it looks like leaking from bottom hose then it is most likely the water pump leaking down the hose.

When replacing a water pump What else should you replace?

Generally, the idler pulleys, tensioner and water pump should always be replaced when the timing belt is replaced. In most cases, the timing belt drives the water pump, so it is the right time to replace the water pump. It is also recommended by the manufacturer.

How do you maintain a car water pump?

Check belts to make sure they are not stretched, cracked or frayed. Make sure the radiator cap seals properly as well. Be sure to do a complete cooling system flush and fill. Drain your radiator, flush it and refill it with the proper distilled water/coolant mixture recommended by your vehicle’s manufacturer.

What happens when a water pump fails?

When the water pump fails completely, it will not be able to circulate coolant through the engine block. This results in an overheating situation and if not repaired or replaced quickly, can cause additional engine damage like cracked cylinder heads, pushed head gaskets, or burnt pistons.

What a bad water pump sounds like?

What Does a Failing Water Pump Sound Like? If you hear a high-pitched, whining sound that increases as you accelerate – it could indicate a faulty water pump. These sounds are caused by a loose belt and the belt becomes loose when the pulley is loose or the bearings are wearing out.

Will black pepper stop a water pump leak?

When black pepper is introduced into the system, the small particles travel to the leak where they expand and seal the leak. The pepper does not deteriorate and will seal the leak until you can get it fixed by a professional.

How do you temporarily fix a water pump leak?

Pour a liquid radiator/water pump stop-leak product, such as Bar’s Liquid Radiator Stop Leak, into your vehicle’s radiator. The radiator is usually located in the front of the engine. The liquid stop-leak product poured into the radiator will flow to the water pump seal and possibly seal or slow the leak.