Table of Contents
The average ABS wheel speed sensor replacement cost is between $200 and $400 per sensor, depending on the car model and labor costs. You can expect to pay about $100 to $150 for the wheel speed sensor and another $100 to $300 for the labor.
Can you drive with a bad ABS sensor?
For example, if an ABS sensor has a broken wire, the entire ABS system will be disabled since the initial self-test will not succeed. The ABS light is yellow for a reason – it indicates that caution should be taken while driving the vehicle, but there is no imminent need to stop.
What are the symptoms of a bad ABS sensor?
A typical ABS wheel speed sensor failure usually comes with a few warning signs, as explained below. Sign #1: The ABS Light Stays On. Sign #2: Traction and/or Stability Control is Disabled. Sign #3: It Takes Longer to Stop Your Vehicle. Sign #4: Your Vehicle Becomes Unstable During Braking. Sign #5: ABS Works Erratically.
Are ABS sensors easy to replace?
Step by Step Guide to Replacing a Wheel Speed Sensor. Fortunately, it is easy to replace a wheel speed sensor and takes you about an hour at maximum. You can also remove the ABS wheel speed sensors separately keeping other parts integrated into the wheel bearing hub assembly.
How long does it take to replace a ABS sensor?
For mechanics, or for handy car owners, the ABS sensor replacement is relatively quick and simple and should take about ten minutes. To make sure the ABS sensor in your car is correctly changed, let a qualified mechanic do it for you.
What causes ABS sensors to go bad?
What are the common causes of failure? Typically these sensors will fail as a result of clogging from metallic debris, brake dust or dirt due to exposure to the harsh elements.
How many ABS sensors does a car have?
Depending on the type of braking system, vehicles may have as few as one or up to four ABS sensors. Mechanism: The ABS sensor usually consists of a toothed ring and a magnet enclosed within a coil.
How long do ABS sensors last?
You can expect an ABS sensor to last 30,000 to 50,000 miles. If the sensor does fail, you should receive an ABS warning light on the dash, and your anti-lock braking system will not engage when needed.
What happens when an ABS sensor fails?
When an ABS wheel sensor fails, it causes the anti-lock brakes to be inoperable. Anytime a fault is noticed, the system triggers an alert, and the ABS warning light comes on. Because the system doesn’t know what is happening, the ABS shuts down until the repair is made.
Can a bad ABS sensor cause brakes to lock up?
So, when an ABS control module fails, you’ll likely notice it when you’re braking heavily. A bad ABS module can behave erratically, making your brakes lock up even under normal braking. You might even notice unusual behavior from the brakes, like random clicking noises. These can also indicate ABS module failure.
Can ABS sensors be cleaned?
With the sensor free, take your rag and wipe the sensor until it’s clean. I prefer not to use any chemicals on the sensor to avoid potential problems. If, however, the sensor is really grungy, use a mild soapy solution and rinse well. The ABS sensors are precision instruments in a crude environment.
How much does a speed sensor cost?
Depending on the vehicle year, make and model, a speed sensor can cost as little as $7.92 or as much as $100. For most vehicles, the cost for a speed sensor is between $25 and $45. Follow these procedures for replacing a faulty vehicle speed sensor (VSS).
How much does it cost for a wheel sensor?
The average cost for wheel speed sensor replacement is between $207 and $252. Labor costs are estimated between $62 and $78 while parts are priced between $145 and $173. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location.
How much does a ABS module cost?
An ABS control module replacement can range from $320 to over $1,000. The wide price range isn’t really driven by labor cost, which will typically be around $80-$120.
Is ABS wheel speed sensor?
Wheel speed sensors are often also called ABS sensors as they were used in vehicles for the first time when ABS was introduced. Wheel speed sensors can be designed as active or passive sensors, depending on how they operate.
Should I be worried if my ABS light is on?
When your car’s ABS light comes on, it means there is a problem with your vehicle’s braking system. You need to address this issue; otherwise, it could make your car unsafe to drive. As such, ABS can help drivers safely apply the brakes and steer their cars during an emergency.
Can you clean ABS sensor without removing wheel?
Disguised sensors are usually located internally in the wheel hub and usually don’t need to be cleaned because they’re protected from dirt. If you are having a problem with a disguised ABS sensor, you’ll need to take it to a mechanic.
How often should wheel speed sensors be replaced?
There’s no hard-and-fast rule to help you predict how long your wheel speed sensor is going to last. Unlike a brake light switch or brake caliper that can last as long as your vehicle, you can expect your transmission speed sensor to last between 30,000 and 50,000 miles.
