Table of Contents
Paving an asphalt driveway costs $4,737 on average, with a range between $2,932 and $6,568. This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If replacing asphalt, it will cost $8 to $15 per square foot.
Is 2 inches of asphalt enough for a driveway?
Residential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate. Underneath this you have soil.
Which is cheaper concrete or asphalt?
The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation. Finishes, details and stains can increase the price tag to as much as $15.00 per square foot.
How much is a black top driveway?
Type of Driveway Material Cost Per Square Foot Driveway Material Cost Per Square Foot Estimate Asphalt/Blacktop $7 – $13 Gravel $1 – $3 Chip Seal $2 – $5 Heated $12 – $21.
Can I put asphalt over concrete?
It is safe to pave asphalt over concrete. Concrete is a great base material because it is stable and allows for excellent compaction of the asphalt above. In fact, many miles of concrete roads are paved over with asphalt every year.
How do you prepare the ground for an asphalt driveway?
The Complete 7-Step Process for Asphalt Pavement Installation Step 1: Demolition and Removal. Step 2: Grading and Sloping. Step 3: Prepare the Sub Base. Step 4: Proof Roll, Undercutting and Sub Base Repair. Step 5: Binder and Surface Course. Step 6: Install New Asphalt Surface. Step 7: Butt Joints and Transitions.
Can you put a garage on asphalt?
You can build a garage on an asphalt driveway as the asphalt has already been laid out. However, it is not recommended. Asphalt absorbs flammable materials and will make the garage floor a fire hazard.
Is blacktop the same as asphalt?
The materials that are used to make blacktop and asphalt are the same. Both are made from two ingredients: bitumen and crushed stone. The difference lies in how those ingredients are combined to make the final product.
What is the cheapest way to do a driveway?
Gravel and Stone Driveways A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway sub-base is sound.
How long should you stay off a newly paved driveway?
Q: How long should I stay off the new asphalt? Normally, 24-hours is all that is required to use your new asphalt surface. In very warm weather, we recommend staying off the fresh asphalt for 1 – 2 days, as the surface cools.
How wide should a driveway be?
How Wide Are Residential Driveways? Primarily, most professionals recommend that you install a 10 feet to 12 feet wide driveway. The standard driveway width for an SUV or conventional pickup truck is 10 feet. Anything less than 10′ wide will likely present difficulties for drivers, even in smaller vehicles.
Can I pave my own driveway?
Making your own asphalt driveway is hard work, and not a job for one person. If you have friends who will help you, it is possible to save a lot of money by doing your own driveway, even after the cost of rental equipment is factored in.
Why are roads asphalt instead of concrete?
Asphalt is less costly than concrete, and it takes less time to build a road made of asphalt. In addition, asphalt is appropriate for road construction and maintenance in rural areas because certain kinds of thick asphalt structures are long lasting and only require surface maintenance.
Can you put asphalt over pavers?
You can install concrete driveway pavers over existing asphalt, although it is not recommended. Asphalt is more subject to freeze/thaw damage, heaving and cracking with extremes of temperature.
What’s the difference between asphalt and tarmac?
Tarmac, short for tarmacadam, is made when a layer of crushed stone or aggregate is coated and mixed with tar. Asphalt, on the other hand, is a more modern variation in which the tar is replaced by bitumen (a byproduct of petroleum distillation).
Can you put asphalt over dirt?
Yes, you can blacktop over gravel. If anything, Over 90 percent of the roads in the US are surfaced with blacktop (preferably known as asphalt).
Can you pour asphalt over gravel?
Yes, it’s possible to get your gravel driveway paved with asphalt. The process requires a few reasonably easy steps that need to be implemented to complete the paving project. You can pave straight over gravel or strip the gravel and start new based on the situation.
Is asphalt a pavement?
Asphalt concrete (commonly called asphalt, blacktop, or pavement in North America, and tarmac, bitumen macadam, or rolled asphalt in the United Kingdom and the Republic of Ireland) is a composite material commonly used to surface roads, parking lots, airports, and the core of embankment dams.
Can you lay block on asphalt?
Concrete, the normal base material for cement blocks, is filled with tiny pores that absorb the cement mud from the block. However, asphalt is composed of a greasy tar material that will not allow good adhesion of the cement block mud.
Can you build a carport on asphalt?
Asphalt is solid and secure like concrete, but it needs routine maintenance and sealing once a year. It’s as durable and dependable as concrete, and it will give the necessary support to your carport. Just like with concrete, attach the carport directly to the asphalt to keep it secure.
Can I put a metal garage on asphalt?
The only essential requirement is that your metal building be installed on a level, cleared surface – our installers can anchor your building into concrete, asphalt, gravel, or even plain ground, as long as it’s level and dry enough!.
