QA

Question: How Much Does Refinishing Hardwood Floors Cost

Nationally, the average cost for refinishing a hardwood floor is $1,761, within a typical range of $1,074 to $2,486. But there’s every chance your floor is anything but average, and your actual costs can vary depending on many factors, especially the availability and cost of labor in your area.

Is it cheaper to refinish or replace hardwood floors?

In general, it will almost ALWAYS be less expensive to refinish your hardwood floors. If you replace them, you need to pay for additional wood as well as ripping up and hauling away existing hardwood. Even if you have this, it will still be less expensive then replacing the whole floor.

How much does it cost to refinish 1000 square feet of hardwood floors?

The cost to refinish 1,000 square feet of hardwood flooring averages between $3,000 to $8,000.

How much does it cost to refinish 1500 square feet of hardwood?

Cost per square foot to refinish hardwood floors: Flooring square footage Average cost 751 – 1000 sq. ft. $2,100 1001 – 1500 sq. ft. $2,350 1501 – 2000 sq. ft. $3,500 2001 – 3000 sq. ft. $5,000.

How often do hardwood floors need to be refinished?

A solid hardwood plank at least 3/4 inches thick will likely need to be refinished four to six times during its total lifespan. It’s commonly accepted that you refinish every seven to ten years. Important note: some hardwood is only 1/4 inches thick. In this case, a refinish could strip away all traces of the floor.

Is my hardwood floors worth refinishing?

In almost every case it is preferable to refinish rather than replace hardwood floors. Part of the appeal of hardwood is that it lasts so long. A quality hardwood floor can be sanded down and refinished at least six times, and up to ten times before you need to replace it.

Can you refinish hardwood floors without sanding?

Whether you have traditional hardwoods, prefinished wood, or laminated wood, restoring without sanding is a practical solution. Though you can sand your traditional hardwoods, it’s difficult or even impossible to sand prefinished or laminated wood floors.

Can you stay in house while floors are refinished?

The strong scent of polyurethane and stain lingers in the atmosphere for very long and can kick-start a migraine any time or all the time. Even if it’s not causing migraines, it’s still uncomfortable to live in a house where the floor is being refinished and there are strong odors in the air.

How long do you have to stay off hardwood floors after refinishing?

How long do I have to wait to use my room after my floors are refinished? We recommend waiting 6 hours before walking on your new floors in socks. After 24 hours you can walk through with shoes on. Allow 48 hours before setting furniture and returning pets.

What is the cheapest way to refinish hardwood floors?

Applying a revitalizer gloss is the simplest and cheapest way to refinish hardwood floors. This approach works best on floors that only have surface-level scratches and other minor wear and tear issues. You can get the job done without the need for equipment rentals or hard-to-find materials.

Can you refinish floors one room at a time?

If your wood floors continue into other rooms of the home, you cannot sand, stain and refinish the one area. The only way to refinish one room is to install a transition piece (or if there’s one in place already).

What is the best time of year to refinish hardwood floors?

If you are in the market to have your hardwood floors refinished this summer, then you might want to consider having it done while you are on vacation.

What is the difference between refinishing and resurfacing wood floors?

Refinishing involves sanding down the uppermost layer of the floor and applying fresh stain and lacquer over the existing wood. Resurfacing your floor involves more than just putting a layer of polish on top.

How do I prep my hardwood floors for refinishing?

Prepare the Floor for Refinishing. Take the following steps before wood floor refinishing. Pull Up the Shoe Base Moulding. Rough-Sand the Floor. Sand the Edges and Corners. Screen Sand the Floor. Remove All Dust. Apply the Wood Stain. Apply the Finish.

Should I remove old hardwood?

Unless your floors are very old and thin or have structural or water damage, chances are they can be saved. If you want a new or exotic type of wood or are unhappy with the current pattern or thickness of your floorboards, you may want to consider replacing them.

Should I remove old hardwood before installing vinyl plank?

Most problematic is the maintenance they require and their fragile nature. No matter how well-maintained, hardwood flooring will need refinishing to restore it occasionally. If you’ve been graced with authentic hardwood flooring, it isn’t even necessary for you to remove it before installing LVT!Jan 6, 2021.

How do I know if my hardwood floors can be refinished?

Water Test. Pour a spoonful of water onto the floor. If it forms droplets that stay on the surface of the wood, the floor finish is still good. If the water is slowly absorbed into the wood, the finish is worn and needs to be restored.

Can I change the color of my hardwood floors without sanding?

PUT A LITTLE COLOR IN YOUR HARDWOOD FLOOR WITHOUT SANDING! Norton|Vermont Natural Coatings EasyWhey is a revolutionary new product that allows you to easily restore or change the color of pre-finished flooring without sanding.

How long does it take to refinish hardwood floors?

It usually only takes about 2 days to refinish hardwood floors with water based polyurethane. (Some places will do it in 1 day, but I would recommend staying away from those places…it will last longer if you allow more drying time, and each coat needs an extra 2-4 hrs to dry.).

Can I sleep in my house after refinishing hardwood floors?

If your hardwood floors have been sanded and finished with Bona Mega Clear HD, it is safe to sleep in the home about 2-3 hours after the project is finished, but again, only if there are other rooms that have not been robbed of their furniture – furniture should stay off floors for at least 24 hours after ANY project Jul 20, 2018.

Should I remove baseboards before refinishing hardwood floors?

As a general rule, we recommend leaving your base and shoe on when having your floors refinished, especially if it is painted. The only time that we would really want you to remove your base or shoe is if your floors have been refinished multiple times and the base was left on during that process.

How do I prepare my home for refinishing floors?

What do you need to do before we begin your project? All furniture must be removed from the flooring that will be replaced or refinished. Pull up any carpeting, including tack strips and staples. The subfloor should have a smooth surface. Remove any linoleum or vinyl floor covering.

Is refinishing hardwood floors worth it?

Refinish When: Things like dents and dings from heavy foot traffic or pet claws may make your floors look dull and worn, but that doesn’t mean that they have to be replaced. Simply sanding and refinishing your hardwoods should make them once more smooth and pristine without the hassle and expense of replacing them.

Does refinishing hardwood floors remove scratches?

Refinishing hardwood floors is the right solution. Hardwood floor refinishing can help you get rid of those unsightly scratches and marks. But as long as the damage is shallow—in the coating and not in the wood itself—you can renew the hardwood floor by adding a new coat of polyurethane right over the old finish.