QA

Question: How Much Hardie Plank Siding Do I Need Calculator

How do I calculate how much Hardie plank siding I need?

To find the area of a triangle, multiply the height of the triangle by the length of the longest side, then divide by two. Once you know the area for each section, add all of the areas together to determine the total square footage of your home’s exterior.

How many pieces of Hardie siding do I need per square?

Hardie Board Siding Dimensions Board Size (width) Board Exposure Pisces / Square (100 sq. ft.) 5.25″ 4″ 25 pcs. 6.25″ 5″ 20 pcs. 7.25″ 6″ 17 pcs. 8.25″ 7″ 14 pcs.

How many pieces of Hardie board do I need?

Estimate Linear Feet Divide the linear footage by 12′ to find the number of boards needed to cover the wall. For example, installing 21 courses of siding on a 20′ wide wall will require 420 linear feet of siding, or 35 boards.

How many pieces of Hardie siding are in a 9.25 square?

Pcs / Sq (100 sq.ft): 13 This installation video is useful for understanding HardiePlank Fiber Cement in general.

How do I calculate how much siding I need?

To find the number of squares of siding needed for an installation, measure the width and height of each wall in feet. Multiply the width and height to get the area of the wall in square feet. Divide the square footage by 100 to get the number of squares needed for the wall.

How many pieces of Hardie siding are in a 7.25 square?

James Hardie HardiePlank Fiber Cement Smooth Siding 7.25″x144″ Primed 1pc. * Minimum order requirement of 25 pieces.

How much should Hardie plank overlap?

Each row of siding should overlap by 1¼” or more.

How many pieces of Hardie siding are in a 8.25 pallet?

A classic look for THE HOME OF THEIR DREAMS. Prime Pcs./Pallet 240 Pcs./Sq.

How much is a square of Hardie siding?

On average Hardie board siding costs $10 per square foot.

How much does Hardie plank cost installed?

Average cost: $1,500 – $9,000 Hardie board siding costs anywhere from $1 to $6 per square foot of material installed on a home. If you were to replace siding on an average size home of 1,500 square feet, you could expect to pay anywhere from $1,500 to $9,000 in total installation and replacement costs.

How much should I charge to install Hardie siding?

Hardie Board siding materials cost $3 to $6 per square foot, and the labor cost to install is $3 to $7 per square foot. Old siding removal adds $0.25 to $1 per square foot when residing. Get free estimates from siding contractors near you or view our cost calculator below.

How wide is Hardie plank?

HardiePlank lap siding comes in 12-ft. lengths. Nomi- nal widths from 51/4 in. to 12 in. create a range of exposures from 4 in. to 103/4 in.

How much siding do I need for a 2500 square foot house?

So, if you have a rounded total of 2500 sq. ft of exterior wall space, you will want enough siding to cover 2625 sq. ft.

How much siding do I need for a 1800 square foot house?

The average cost to install vinyl siding on a single-story 1,800 sq. ft home will cost around $4,559. Depending on the quality of the vinyl siding material installed, you could pay anywhere from $1 to $8 per square foot.

How much siding do I need for a 2000 square foot house?

House siding costs $4,300 to $15,800 on average, or between $3 to $11 per square foot depending on the home’s size and materials used. The cost to reside a 2,000-square-foot home with vinyl is $7,100 on average. The cost to replace siding adds $1,000 to $3,000 for removing the old siding.

How much does a 12 piece of Hardie board weigh?

Hardieplank weighs 2.3 lbs per square foot. That is about the same weight as 5/8″ thick Sheetrock. Hardieplank is installed on load-bearing walls.

Do you need plywood under Hardie board siding?

Fiber cement siding should be installed over plywood, OSB, or sheathing. Building codes will usually require installing siding over water-resistant barriers and nailed into the studs every 16 or 24 inches.

Do you caulk Hardie siding?

James Hardie DOES NOT recommend using caulk or “H”-jointers for the butt joints of HardiePlank® siding with ColorPlus® technology. James Hardie also DOES NOT recommend applying caulk to the horizontal overlap between siding planks (see Figure 2).

How many Hardie planks are in a pallet?

Q:How many boards come in a bundle? A: There are 280 pieces per pallet for product with ColorPlus® Technology and 308 pieces per pallet for the primed product.

How much does a pallet of Hardie weigh?

Primed HardiePlank Siding Specifications Weight 2.40 lbs. per square foot Length 144-in Width 8-1/4-in Exposure 5-in Pcs./Pallet 280 ColorPlus, 308 Primed.

How much does a sheet of Hardie board cost?

Hardie board siding runs about $0.70 to $5.25 per square foot. This could lead to a total cost of anywhere from $4,700 to $13,300.

Which is cheaper Hardie board or vinyl siding?

Vinyl siding is nearly always less expensive than fiber-cement siding both in terms of the product and labor costs since it can be installed faster. Still, any cost savings may not be reflected in the eventual sale of your home: For resale value, HardiePlank is the better choice.

Is James Hardie siding worth it?

James Hardie siding is a great, environmentally friendly choice for overall curb appeal and home value. It will give your home a new look and feel to it. It is an attractive choice with guaranteed durability and quality. It provides an amazing return on investment.