Table of Contents
To shock your pool, use 2 pounds of shock for every 10,000 gallons of water, which should raise your chlorine levels to 10.0 ppm. Depending on your pool, you can use either Leslie’s Power Powder Plus or Leslie’s Chlor Brite.
Can you put too much shock in a pool?
You cannot overshock a swimming pool or add too much. Adding too much shock or overshocking your pool will kill off algae. The negative of adding too much shock is it will upset the chemical balance of your pool. It’s likely to do that regardless of if you overshocked the pool or not.
Do I need to shock my pool when I open it?
KNOW WHEN IT’S TIME TO SHOCK: Shock your pool when you open it for the season to kill algae that has developed in the Spring. AFTER A PARTY OR HEAVY USE: People carry bacteria and chlorine levels can drop drastically when there are many active swimmers using a pool.
How much chlorine do I add to my pool when I open it?
For pool startup, it’s best to double shock your pool, meaning that you add two pounds of chlorine shock for every 10,000 gallons of water. After shocking a pool, aim to have chlorine at 10 ppm. After this routine, your pool should be good to go.
What chemicals do you add first when opening a pool?
Chemicals Needed for Pool Start Ups Stain & Scale Preventer. Granular Shock Chlorine. Chlorine Tablets. pH Increaser and/or pH Decreaser. Alkalinity and/or Calcium Increaser. Cyanuric Acid (Stabilizer) Algaecide and Clarifiers if needed. Complete Test Kit or Test Strips.
Can I shock my pool 2 days in a row?
It’s pretty tough to over-shock your pool; shocking your pool two days in a row with the proper dosage for your pool volume shouldn’t be a problem – and in fact, is sometimes even needed to rid your pool of algae and other contaminants.
Why did my pool get cloudy after I shocked it?
But if the cloudy water persists long after you’ve shocked the pool, you’re likely having an issue with water balance, circulation, or filtration. Heavy use of a calcium based pool shock (cal-hypo) may increase Calcium Hardness over a period of time, increasing your odds of cloudy water.
Can I swim 12 hours after shocking pool?
After Shocking Your Pool It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours.
How long does it take for pool to clear after opening?
As a general rule of thumb a DE filter can clear up a pool within 1-3 days, a sand filter 5-10 days, and a cartridge system can vary widely based on the size and condition of the filter elements, and how often they are disassembled and cleaned.
Do you shock pool after rain?
Shock the pool After heavy rainfall, your pool’s chlorine levels will be much lower from fighting off contaminants. Shocking your pool replenishes the chlorine lost from the rain. And while one shock treatment won’t be enough to balance your water, it’ll work in the background as you continue cleaning your pool.
How much shock do I need for a 15000 gallon pool?
Typically for granular shock, you’ll need one pound for every 10,000 to 13,500 gallons of pool water.
Is it too early to open my pool?
There are no set rules for pool opening, and the exact time highly depends on your region of the country. Mid-March is fine after a milder winter, while April is better after a colder season. If you happen to open a little too early, leave the pump running and reinstall your pool cover until the weather warms up again.
What order do you balance pool chemicals?
7 Steps to Balance Pool Water Test and Adjust Total Alkalinity. Test and Adjust pH. Measure and Adjust Calcium Hardness. Add Sanitizer to Your Water. Check and Adjust Cyanuric Acid. Measure Your Water’s Total Dissolved Solids. Shock Your Swimming Pool.
Should I shock pool after filling?
The clarifier will help the filter to remove the very tiny particles that enter the pool in the filling process or that may remain following construction and installation. Shock treat the pool using a quality non-chlorine shock.
Do I use shock or algaecide first?
Algaecide should be used after each shock treatment, so it has a better chance to support your chlorine as it works its magic. Be sure to shock your pool first, then when the chlorine levels of your pool return to normal, add the correct amount of algaecide to several places around your pool while your pump is running.
How do I open my pool for the summer?
Your Swimming Pool Opening Checklist Remove, Clean and Store Your Pool Cover. First, remove your pool cover, clean it and store it away securely. Fill Your Pool Up. Clean Out Debris. Inspect and Clean Your Pool Filter. Reinstall Plugs. Prime Your Pool Pump and Filter. Test and Balance the Pool Water. Shock Your Pool Water.
What happens if you put too much shock?
Although, if you overdo the shock treatment, you risk getting green hair from chlorine due to the excess chlorine oxidizing the copper in the water. You can execute a shock treatment with a few different types of pool shock, just be mindful of how much you’re using.
Can I add shock and chlorine at the same time?
Adding chlorine besides the shock can increase the chlorine content in the water which can make the entire shocking process useless. Hence, it is better if you don’t use the shock and chlorine at the same time. The best time to add chlorine to the pool water is after you have shocked the pool.
