QA

How Much To Add A Fireplace To An Existing House

How Much Does It Cost to Put in a Fireplace? According to HomeGuide, on average, a new metal prefabricated gas or wood-burning fireplace costs $2,900 installed, while an electric fireplace costs about $1,200. A masonry fireplace costs an average of $4,900 installed in an existing home with a 12-foot chimney.

Is it expensive to add a fireplace to a house?

Fireplace Cost Fireplace installation costs between $100 and $5,600 depending on the type. The cost to install a gas fireplace is $2,300 to $4,000, a traditional wood-burning fireplace runs $1,900 to $3,300, and an electric fireplace costs $100 to $2,200. Building a masonry fireplace costs $3,500 to $5,600.

Can you add a fireplace to a house that doesn’t have one?

If your home doesn’t have a fireplace, that’s OK: With careful planning, you can add one. As you begin your research, the first thing to know is that fireplaces generally fall into one of three categories: masonry, zero-clearance (also known as pre-fabricated or manufactured), and gas.

How much does it cost to add a gas fireplace to an existing home?

Most units fall between $400 and $4,000 when including basic installation prices — though costs can run much higher. Depending on the type of fireplace you choose, the total cost of installation can reach anywhere from $2,300-$10,000 at the high end.

How much does it cost to install fireplace?

The average fireplace installation cost is $2,500. Fireplace prices can vary from $1,000 to $4,500, with the price dependent on if it’s electric, wood-burning, or gas. The fireplace unit can come with a price tag of $2,000, and the installation can cost an additional $2,200 for the labour.

Can you add a fireplace to an existing house?

Be assured that it is possible to add a fireplace to an existing home. Fireplaces generally fall into one of three categories: gas, masonry, and zero-clearance (also known as prefabricated or manufactured fireplaces).

Can you add a fireplace to an interior wall?

As to the wall, there needs to be a way to vent to the outside, so an exterior wall works best. If you are considering a fireplace on an interior wall, there must be a way to vent to the outside, but today’s technology makes this doable in most situations.

How much does it cost to build a brick fireplace and chimney?

Brick Fireplace Average Costs The average fireplace installation cost is $2,500 to $5,000, although an authentic brick fireplace constructed by a mason could cost up to $10,000 or more. Installing a prefabricated brick fireplace costs $2,000 to $3,000. A mason-built brick fireplace costs $3,500 to $5,000.

How can I install a gas fireplace in my house without one?

You don’t need one. You simply vent the fireplace out the side of the house. Once the fireplace is installed, you just flip a switch to start a roaring fire.

Is a gas fireplace insert worth it?

A gas fireplace offers a range of benefits over burning wood in your home, including the ability to instantly turn on, control and turn of the heat from the fire. The advantages of having gas fireplace can outweigh the disadvantages in many scenarios, making a gas fireplace a worthwhile investment for your home.

How expensive is it to run a gas fireplace?

The average price of natural gas in the US in 2020 was around $11 per thousand cubic feet 1, equating to about $1.06 per therm. That means that a 38,000 BTU gas fireplace costs approximately $0.40 an hour to run.

How much does it cost to install a wood-burning fireplace?

To install a wood-burning fireplace, the average homeowner can expect to pay between $860 and $3,500, according to HomeAdvisor’s True Cost Guide. The national average cost for gas fireplace installation is $2,160.

Is it easy to install a fireplace?

Modern fireplaces – both wood-burning and gas-fueled – are much easier to install than building a traditional masonry unit. Fireplace inserts are even easier, because they’re pre-built from the factory and require only an opening to fit in to.

Do plumbers install fireplaces?

Yes, plumbers can help you with anything related to propane or gas. They may specialize in drains or anything related to water, but they often are both qualified and experienced enough to install and repair gas fireplaces professionally. Same goes for gas leaks as they too pose a great threat to you and your family.

Can you add a second fireplace to an existing chimney?

Fireplaces on multiple levels can also share one chimney structure. Each fireplace can face the same direction, if you want, since they will not block each other. You might even choose to combine a multi-level fireplace with a double sided fireplace, combining three fireplaces into one chimney.

Can you install a direct vent fireplace on an interior wall?

Direct Vent gas fireplaces require outside air for combustion and exhaust – that’s why they are so often installed on outside walls of homes. But what if that perfect spot for a fireplace is on an interior wall? No problem!.

Can you install a fireplace without a chimney?

Yes, it is possible to add a wood burning stove or a fireplace without an existing chimney, but you do need to install a chimney in the process. You can’t install a completely vent-free wood burning fireplace because the smoke and gases have to have a way to exit.

How much does it cost to build a brick fireplace surround?

Most pay around $15,000 for a wood-burning fireplace with a tile surround and a tempered glass door, with a new chimney and flue in an existing home.Cost to Build a Fireplace Surround by Material. Material Average Costs per Sq.Ft. (Installed) Brick $25 – $50.

How much does it cost to build a chimney stack?

A complete chimney stack rebuilding costs $1,000 to $3,500 or between $100 and $300 per linear foot from above the roof to the crown. A partial rebuild costs $600 to $1,000 to rebrick a small chimney or the top few feet of a large stack with cracks, spalling, or missing bricks.

How much does it cost to build a stone chimney?

A stone fireplace or chimney costs between $10,000 and $20,000. However, if you need to take down an existing one, the cost to remove a fireplace and chimney could add $500 to $6,000 to your project. Contact a fireplace contractor near you for a complete estimate.

Can you have a gas fireplace without a gas line?

VENTLESS GAS LOGS: Ventless gas logs can be installed in any fireplace that is fully capable of burning wood and are burned with the damper closed. Important Note: Ventless gas logs are NOT legal in California and some other states, cities or municipalities.