Table of Contents
The average time to replace a power window motor is 2.1 hours. That averages out to roughly $120 to $150 in labor time plus the cost of the motor itself. This can usually bring the entire job to a total of anywhere from $200 to $300, depending on make and model.
How much does it cost to fix a power window?
The cost of fixing a power window depends on the parts that need replacing. The cost of labor also depends on the necessary repairs and the options your vehicle is equipped with. Because of that, the total cost can vary greatly, and is typically in the range of $100 to $300 or more.
How much is a motor for a window?
Replacement aftermarket window motors may go from $5 to $855, depending on different inclusions and other variations. As for labor cost, it may average around $120 to $150, but could be higher depending on how long it takes to replace the part.
Can a power window motor be repaired?
In some cases, a power window motor can be repaired and doesn’t require replacements, thus saving YOU money! When the problem stems from broken plastic or rubber inside the window motor casing, Power Window Repair can often replace or repair those parts, giving your power window motor new life for years to come.
How do I know if my power window motor is bad?
Symptoms of a Bad or Failing Window Motor / Regulator Assembly It takes multiple presses to roll the window up or down. Window speed is slower or faster than usual. Clicking from the door when the window rolls up or down. Power window won’t stay up or is crooked.
What does it mean when your car window wont go up?
There are a multitude of reasons why your car window might not roll up, including: The fuses are blown, preventing the electrical controls handling the window from working. The child safety lock is engaged by accident. The window switch is functioning correctly, but the window motor has malfunctioned.
How much does it cost to fix a window that won’t roll up?
Repair costs to fix a window that won’t go up can be $20 or less if you’re only dealing with a new fuse that you replace yourself. More complex repairs that involve dismantling the door to access the window motor can run $250 to $400 or more.
What is a window motor?
A special motor is attached to the window glass within each door, enabling the windows to be raised or lowered at the push of a button and these motors are plumbed into the car’s electrical system to receive power from the vehicle’s battery.
Can you replace window motor without removing regulator?
If you are only replacing the power window motor and not the regulator itself, you will need to disconnect it and connect it to your new power window motor. Visually inspect the two to make sure the new motor matches the old one, then swap the regulator.
Does each car window have its own fuse?
Most window circuits are protected by a fuse or cutout in the supply line and this is the first place to check if the windows refuse to operate. Other cars have individual fuses for each window motor so failure will only affect the one window.
How long should a window motor last?
Assuming an “average” number of uses, the normal service life of ANY power window motor and assembly will well exceed the value of 2 years and by orders of magnitude.
How do I know if I need a new window motor?
Here are some of the symptoms to look out for: Grinding or Clicking Noises While Rolling Up the Window. The window regulator, or motor, is located in the door of your car. Window Won’t Stay Rolled Up or is Off-Center. The Button Doesn’t Work the First Time. Window Seems Sluggish or Too Quick. How We Can Help.
How do you tell if it’s the window motor or regulator?
Power window goes down, but not up, the motor is not running when the switch is in “UP” position. Window motor runs but the window jams or doesn’t move: In this case, we know that the window switch, the wiring and the window motor work. That means the problem is with the window regulator.
What does a bad window regulator sound like?
If the window is able to move and you hear strange noises, this could be an early warning sign of a failing regulator. The noises may sound like grinding, clicking, or chattering.
How do you get a car window up when the motor is broken?
Two Ways to Roll up a Power Window That Stopped Working Turn the ignition key to the on or accessory position. Press and hold the window switch in the closed or up position. With the window button depressed, open and then slam the car door.
Can a blown fuse cause windows not to work?
If the fuse is blown, pushing a window button will do nothing at all: The motor won’t groan and the glass won’t quiver. If the fuse is good and you can hear the motor, or the glass acts like it wants to move, then you’ve got some sort of mechanical problem.
Why does my power window go up but not down?
If so, then the problem lies in the passenger switch, the wiring between the passenger switch and the passenger motor, or the motor itself. To find out which it is, reconnect the electrical connector to the passenger switch and remove the door panel. If you don’t then check for an open in the wiring or a bad switch.
How much is a motor for an electric window?
Average Cost for Full Replacement of Power Window Motor The cost of a motor varies depending upon the type of car, but it usually runs in the area of $150 to $300 dollars.
Where is the window motor?
Power windows are almost universal in modern vehicles, and if a window doesn’t go up and down, the electric motor that supplies the power could be at fault. The window motor is mounted inside the door panel and attached to the regulator, the mechanical assembly that does the heavy lifting to raise and lower the window.
