QA

Quick Answer: How Thick Should Underlayment Be For Vinyl Flooring

How thick should underlayment be for vinyl flooring? In general, underlayment for vinyl plank flooring will be between 2mm to 3mm in thickness although some can be as much as 6mm thick and the thinnest around 1mm.

What type of underlayment do you use for vinyl plank flooring?

Rigid Underlayment Plywood is often the most commonly used type of underlayment in vinyl plank flooring installation. Sheets of 4×8 foot plywood, usually ¼ to ½ inch thick tend to be an excellent flooring underlayment for many subfloors including wood, tile, and linoleum.

Can you use 2 layers of underlay under vinyl flooring?

Manufacturers do not recommend using two layers of underlayment under laminate flooring because it can create more movement between the plank seams, which could cause the planks to separate or make a squeaking sound when you walk across the floor.

How thick should the wear layer be on vinyl plank flooring?

It’s suggested to have a wear layer of at least 12 mil for residential spaces and 28 mil for commercial spaces.

How thick should underlayment be?

Underlayment. Underneath the top flooring layer is often (though not always) an underlayment. It comprises padding materials and is typically about 1/4 to 1/2 inch in thickness. The purpose of the underlayment is to provide a sturdy yet comfortable layer for your outer flooring to sit on.

Do I need underlayment if it is already on the vinyl plank?

Pre-attached: Some vinyl plank flooring has a layer of underlayment already attached. In this case, the only type of extra underlayment required is a moisture barrier, if installing in wet areas or over concrete. It is not recommended for installation over concrete or in wet areas.

Is 5mm underlay good?

Warmth and thickness – 5mm is the thickest you can go for laminate which means this product will provide the ultimate cushioning and warmth. Noise reduction – the rating of 22db allows this product to greatly reduce the sound of impact noise in your home.

How thick can laminate underlay be?

How thick should laminate underlay be? We would recommend an underlay of 3 – 5mm for laminate flooring. It should be at least 3mm thick to provide comfort and ground levelling properties. But, it should be no more than 5mm thick.

Can you have too much underlayment?

No, it is not recommended to install a thick or double layer of underlayment with laminate flooring. If you install any additional underlayment, the base for your flooring will end up being too soft and could jeopardize the integrity of the locking system.

Is 12 mil wear a good layer?

The more MIL’s a product has the stronger the wear layer is. So, a 6 or 12 MIL product will work for your home, but not for a commercial setting. A 20 MIL product will work for your home, AND work for a commercial setting. The higher the MIL’s the higher the warranty in years, and vice versa.

Is 12 mil wear layer enough for dogs?

Usually, 12-mil is the minimum recommended wear layer thickness for residential spaces. If you have kids, dogs, or pets with sharp nails, a 20-mil wear layer thickness would be better. The top coating is equally as important as the thickness of the wear layer.

Is 5mm good for vinyl plank flooring?

When choosing click floating flooring, it is best to pick planks or tiles with a minimum thickness of 5mm. This will provide stability underfoot and minimize the hollow-spot effect. Thinner floating floors are also harder to install and result in weaker click-lock seams.

Is 2mm underlayment good?

You might see thickness listed when shopping for laminate underlayment, but it’s usually not important. Most underlayments are 2-3mm thick. The advantage of 2mm would be with radiant heating or under thin laminate but 3mm is more common.

Is 3mm underlayment good?

Standard underlayment. This is the most commonly used underlayment. It is also 3mm thick (1/8” thick) and is best installed over wood subflooring. It only offers basic sound reduction. It does not keep out moisture.

Are there different thicknesses of underlayment?

With that being said, most underlayments are 2-3mm thick, but are sometimes thicker for carpet or to smooth out an uneven subfloor. It’s often advertised that 6mm underlayment offers double the sound absorption as 3mm underlayment.

What is the difference between subfloor and underlayment?

Basically, subfloors are a structural part of your home that provide strength and rigidity to your home’s flooring. Underlays, on the other hand, protect your floor covering from moisture, help soundproof your floor, and offer cushioning and comfort underfoot. You can think of your floor like a sandwich cookie.

Do I need a moisture barrier under vinyl flooring?

Meaning, if you’re going to install vinyl plank flooring over tile, vinyl flooring, and even hardwood. As with the plywood floor, there’s no need to worry about a moisture barrier; the underlayment should provide cushioning and sound-deadening benefits.

Does SmartCore need underlayment?

While most products sold by the best vinyl plank flooring brands have an attached underlayment, SmartCore does not. That’s not a problem in itself, and Lowes pairs a recommended underlayment with the product.

Can you double up laminate underlay?

It is not recommended to use more than one layer of underlayment under laminate flooring as it can make the flooring too soft and unstable, and can cause the joints to dislodge, or its locking system to break.

Is thick laminate underlay better?

Thicker laminate will definitely offer more stability and strength, so if a little extra cost is not an issue, thicker laminate is definitely worth it. It’s also the better option if your subfloor isn’t as sturdy, such as an old creaking wood subfloor.

How do you choose thickness for laminate flooring?

Laminate flooring should be between 6-12mm thick. If you find thicker than 12mm, it’s an inaccurate measurement–possibly including attached padding. If you want the highest-quality, hardwood feel, you’ll want 10 or 12mm. If cost is a concern and you have a smooth subfloor, you can get by with 7 or 8mm.