QA

Quick Answer: How To Add Grommets To Drapes

Can you add eyelets to curtains?

2) Fold under 2cm at the top of the curtain panel and lightly iron. Pin the eyelet tape along the top edge of the fabric and sew into place. Draw around the inside of each ring with a fabric pen, then cut out these circles to create the eyelet holes. 3) Press the eyelets into place at the front of the curtain.

What can I use instead of grommets?

A webbing loop is a great alternative to a grommet for things like sails, tie downs, fabric covers and more. Webbing loops are very useful, and they even have some added benefits versus installing grommets.

Do dunelm alter curtains?

We can alter your readymade curtains for a more bespoke fit, all you need to do is speak to a colleague in our Made To Measure area in store. Some of our curtains are tightly packed, so they might need a light ironing before hanging.

How far apart should curtain rings be placed?

I like to space ring clips approximately four inches apart so that there is a handsome fold between each clip in the drapery panel. Start by clipping each end of the panel. Next, clip the middle. Finally, space the clips evenly apart as close to 4 inches as possible.

What is the difference between an eyelet and a grommet?

An eyelet is a small piece of metal that is used to reinforce a hole in a piece of fabric; usually made of brass. Grommets are very similar to eyelets, because they are used to reinforce a hole as well; however, grommets are typically used for more heavy duty material than eyelets.

How do you use a handheld grommet tool on fabric?

How to Use A Grommet Tool. Place the anvil on a piece of scrap wood, and position the fabric with the marked spot in the center of the anvil. Carefully place the hole punch over that (as noted, here’s the same tool as the hole-setter) and hit it with a hammer.

How do you set eyelets without a tool?

Add a layer of fusible interfacing to thin fabric before placing an eyelet in it. You may be able to set a small eyelet by placing the eyelet in fabric between the jaws of a handheld die punch. The back of the eyelet should rest against the die of the hole punch. Squeeze gently but firmly to fold it on itself.

Does dunelm do alterations?

Our expert fitters will come to your home and double-check your window measurements before your order goes into production. Once your order has been carefully crafted, we’ll be in touch to arrange the delivery and fitting your window dressing.

How much does it cost to shorten curtains?

Curtain Hemming Cost Shortening a curtain involves hemming so you are looking at basically the same price for both tasks. On average, expect to pay between $15 and $35 for unlined hems and abut $20 to $70 for curtains with lined hems.

Can you cut curtain track to size?

Fitting a curtain track All Dunelm tracks can be cut down to size using a fine tooth hacksaw, and a vice to hold it steady during cutting. If you’re cutting two tracks down to join them together, cut equal amounts from each end, not the middle.

How do you measure for curtain rings?

Choose a drapery ring with an inside diameter ½ inch larger than the diameter of the pole or rod. For example, if you have a 1-inch diameter rod, the appropriate ring will have an inside diameter of 1 ½ inches. A ring with a smaller inside diameter will make it difficult to move the drapery along the rod.

How many curtain rings do I need UK?

The general rule is to place a ring every four to eight inches. Determine the weight of the curtains. The weight of the fabric will play a factor in how many rings you need. The heavier the fabric, the more rings you should use.

What kind of curtains do you use with clip rings?

The best curtain ring clips work with flat panels, but they also work with rod pocket curtains. Attach the clips to the top edge of the panel by flattening the pocket.

Can you use curtain rings on rod pocket curtains?

Hooks or curtain ring clips can be used on rod-pocket curtains. Specialty curtain rings with clips attached allow you to hang any type of lightweight or medium-weight curtains from a curtain rod.

How do you put grommets in rod pocket curtains?

To apply the grommets, you place one side of the grommet underneath the panel, centered on the hole, and the other side of the grommet on the other side of the fabric centered on the hole and snap them together.

Which is stronger eyelet or grommet?

Grommets are much stronger than eyelets and used in situations that call for a more reinforced and longer lasting hold, such as permanent signage and heavy curtains or drapes.

Is grommet an eyelet?

An eyelet is a small piece of metal that is used to reinforce a hole in a piece of fabric; usually made of brass. Grommets are very similar to eyelets, because they are used to reinforce a hole as well; however, grommets are typically used for more heavy duty material than eyelets.

What is an eyelet used for?

Eyelets are metal, plastic, or rubber rings that are inserted into a hole made through another material. Eyelets may be used to reinforce the hole or to shield something from the sharp edges of the hole. More specifically, eyelets are flanged metal rings used as reinforcement for a hole in fabric or paper.